Structures of the N-Terminal Domain of PqsA in Complex with Anthraniloyl- and 6-Fluoroanthraniloyl-AMP: Substrate Activation in Pseudomonas Quinolone Signal (PQS) Biosynthesis

Pseudomonas aeruginosa, a prevalent pathogen in nosocomial infections and a major burden in cystic fibrosis, uses three interconnected quorum-sensing systems to coordinate virulence processes. At variance with other Gram-negative bacteria, one of these systems relies on 2-alkyl-4(1H)-quinolones (Pseudomonas quinolone signal, PQS) and might hence be an attractive target for new anti-infective agents. Here we report crystal structures of the N-terminal domain of anthranilate-CoA ligase PqsA, the first enzyme of PQS biosynthesis, in complex with anthraniloyl-AMP and with 6-fluoroanthraniloyl-AMP (6FABA-AMP) at 1.4 and 1.7 Å resolution. We find that PqsA belongs to an unrecognized subfamily of anthranilate-CoA ligases that recognize the amino group of anthranilate through a water-mediated hydrogen bond. The complex with 6FABA-AMP explains why 6FABA, an inhibitor of PQS biosynthesis, is a good substrate of PqsA. Together, our data might pave a way to new pathoblockers in P. aeruginosa infections.     

Do phosphoric acid esters affect the immediate enamel bond strengths?

Purpose: To investigate the effects of phosphoric acid esters (PAEs)-containing primers on the micro-tensile bond strengths (MTBS) of etched enamel, the micro-morphologies of the resin–enamel interfaces, and the enamel surfaces.

Materials and Methods: Thirty-three bovine incisors were used in this study. After the labial enamel surfaces were highly polished, they were etched, water sprayed, and air-dried. Afterward, the enamel surfaces were treated with or without (control) one of three PAEs-containing primers (40%MDP, Ivoclar Vivadent; Resulcin AquaPrime A + B, DMG; Xeno V, Dentsply), water sprayed, and air-dried. Subsequently, an adhesive Heliobond (Ivoclar Vivadent) was applied and resin composite (Core Build-up, Bisco) was placed incrementally. They were prepared into multiple beams of about 1 × 1 × 8 mm for MTBS tests. The enamel surfaces and resin–enamel interfaces were analyzed by SEM and TEM. The data were analyzed by two-way ANOVA and LSD test.

Results: Using PAEs-containing primers could increase the enamel MTBS (p < 0.05). The primer MDP produced higher MTBS than the primer Resulcin AquaPrime A + B and Xeno V. The SEM findings revealed the primed enamel surfaces were covered with a thin or glue-like layer of monomer-calcium salts of PAEs and the residual enamel crystallites, and various micro-porosities were detected within the hybrid layers. The TEM findings revealed the hydroxyapatite crystallites were tightly covered by the adhesive, the adhesive mixed with resin composite, or sparse irregular enamel crystallites.

Conclusion: The application of PAEs-containing primers on the etched enamel substrate could significantly increase the immediate enamel bond strengths. However, this effect was dependent on the individual PAEs-containing primer used.     

Expression profiles of effector proteins SopB, SopD1, SopE1, and AvrA differ with systemic, enteric, and epidemic strains of Salmonella enterica

The presence and expression of sopB, sopD1, sopE1, and avrA genes encoding virulence associated effector proteins were studied comparatively in 405 Salmonella enterica strains. They belong to different serovars and clonal types (genotypes, phage types) and originated from different clinical (systemic infection, focal enteritis, enterocolitis) and epidemic sources (epidemics, sporadic cases). The sopB and sopD1 determinants were commonly prevalent, but sopE1 and avrA genes only in 55% and 80%, respectively. A correlation of this pattern of absence and presence of the respective genes to the epidemic and clinical origin could not be detected. In contrast, the expression of the respective genes appeared differently: SopB and SopE1 proteins are well produced, but SopD1 and AvrA proteins only rarely under the applied standard culture conditions. However, using a range of different environmental signals (temperature, pH, cations, etc.) some of the S. enterica nonproducer strains (e. g., S. Agona, S. Bovismorbificans, S. Virchow, etc.) begin to produce AvrA and SopD1. They turned now into an expression profile which was found typically for the epidemic strains of S. Typhimurium and S. Enteritidis. Also S. enterica strains from systemic infections could be characterized by their strong SopB and SopE1 expression while SopD1 and AvrA proteins were missing. Although it is premature to outline generally a correlation of these expression profiles and the clinical and epidemiological potency of Salmonellae, the reported results allow a first understanding how a fine tuning of their virulence will take place.     

Effects of Spray-Drying Conditions on the Physicochemical Properties of Blackberry Powder

The purpose of this work was to study the effects of spray-drying conditions on the physicochemical characteristics of blackberry powder using a central composite rotatable design. Inlet air temperature (140–180°C) and maltodextrin concentration (5–25%) were employed as independent variables. Moisture content, hygroscopicity, anthocyanin retention, color, powder morphology, and particle size were analyzed. A higher inlet air temperature significantly increased the hygroscopicity of the powder, decreased its moisture content, and led to the formation of larger particles with smooth surfaces. Powders produced with higher maltodextrin concentrations were less hygroscopic, slightly lighter and less red, and had a lower moisture content. Anthocyanin retention was mainly affected by drying temperature due to the heat sensitivity of the pigment. The optimal processing conditions were an inlet air temperature of 140–150°C and maltodextrin concentration of 5–7%. Overall, these results indicate that good quality powders can be obtained by spray drying, with potential applications for the food industry.     

Tuning the colour of white polymer light emitting diodes

Colour tuning of white polymer light emitting diode (LED) light sources can be attained by various methods at various stages in the production process of the lamps and/or by the design of the active material incorporated in the LEDs. In this contribution we will describe the methods and discuss the physical background of colour tuning. Furthermore, the material design has led to polymers which are more stable during electrical stress, so that colour shift during lifetime can be excluded for white polymer LEDs.     

The European project trust—reconfigurable terminals and supporting networks

To date, research into reconfigurable mobile communications has predominantly focussed on the software radio concept, and specifically on the hardware technologies required to move physical layer processing into a programmable environment [1, 2, 3]. Although an interesting and necessary challenge, this only represents a fraction of the overall support and technology required to realise the potential of the concept. Other necessary developments include network/terminal cooperation for seamless inter-standard handoff, QoS management for software download and reconfiguration, a secure software download mechanism, terminal software and mobile radio network architecture supporting terminal reconfiguration, management for software downloads, configuration management, capability negotiation, radio resource management and spectrum allocation policies etc… This paper describes results from the EuropeanIst Trust (Transparently Reconfigurable UbiquitouS Terminal) [4] project concerning user and operator requirements, the proposed overall system environment, security issues, concerted radio resource management, and expected time frame for the development of reconfigurable terminals.     

Polarized light scattering by microroughness and small defects in dielectric layers

The polarization of light scattered by the surface of a material contains information that can be used to identify the sources of that scatter. Theories for light scattering from interfacial roughness of a dielectric layer and from defects in that dielectric layer are reviewed. Methods for calculating the Mueller matrix or the Stokes vector for scatter from multiple sources and for decomposing a Stokes vector into contributions from two nondepolarizing scattering sources are derived. The theories are evaluated for a specific sample and geometry. Results show that some incident polarizations are more effective than others at discriminating among scattering sources, with s-polarized light being least effective. The polarization of light scattered from interfacial roughness depends upon the relative roughness of the two interfaces and the degree of correlation between the two interfaces. The scattering from defects in the film depends on the depth of the defect and differs from that from any one of the cases of interfacial roughness. The scattering from defects randomly distributed in the film and for small dielectric permittivity variations in the film is also calculated. Experimental results are presented for a 52-nm SiO2 film thermally grown on microrough silicon.     

Lagrangian Coherent Structures with Guaranteed Material Separation

Given an unsteady flow field, one common way to compute Lagrangian Coherent Structures (LCS) is to extract extremal structures of the Finite Time Lyapunov Exponent (FTLE). Experience has shown that the resulting structures are often close to material structures (i.e., material lines or material surfaces). Moreover, it has been proven that for an integration time converging to infinity, they converge to exact material structures. However, due to the finite integration time in FTLE, they are generally not exact material structures. In this paper we introduce a modification of the FTLE method which is guaranteed to produce separating material structures as features of a scalar field. We achieve this by incorporating the complete available integration time both in forward and backward direction, and by choosing an appropriate definition for separating structures. We apply our method to two test data sets and show the differences to classical FTLE.