The fractions obtained from bagasse after activation with 17.5% NaOH, alternative alkylation with quarternary ammonium groups and extraction with 80% ethanol, water and 5% NaOH, were analyzed using pyrolysis-field ionization mass spectrometry (Py-FIMS). The proposed degradation products from lignin were mostly symmetric fragments containing two aromatic rings while the compounds formed from polysaccharides were the result of dehydration reactions. From the temperature-resolved Py-FIMS it could be seen that ethanol-lignin starts to degrade at temperatures lower than 180°C before the degradation of the hemicellulose fraction. The lignin markers are eliminated from hemicellulose fractions before the polysaccharide gasification starts. The quarternary ammonium groups are cleaved from the fractions at temperatures lower than 200°C. 相似文献
Chinese TLV-bronze mirrors dating to the Han dynasty (206 B.C.-220 A.D.) were popular objects of everyday life as well as highly esteemed works of art. The decorated back of the mirror characterizes the culture of this period as well as the excellent early Chinese casting techniques. 相似文献
Pseudomonas aeruginosa, a prevalent pathogen in nosocomial infections and a major burden in cystic fibrosis, uses three interconnected quorum-sensing systems to coordinate virulence processes. At variance with other Gram-negative bacteria, one of these systems relies on 2-alkyl-4(1H)-quinolones (Pseudomonas quinolone signal, PQS) and might hence be an attractive target for new anti-infective agents. Here we report crystal structures of the N-terminal domain of anthranilate-CoA ligase PqsA, the first enzyme of PQS biosynthesis, in complex with anthraniloyl-AMP and with 6-fluoroanthraniloyl-AMP (6FABA-AMP) at 1.4 and 1.7 Å resolution. We find that PqsA belongs to an unrecognized subfamily of anthranilate-CoA ligases that recognize the amino group of anthranilate through a water-mediated hydrogen bond. The complex with 6FABA-AMP explains why 6FABA, an inhibitor of PQS biosynthesis, is a good substrate of PqsA. Together, our data might pave a way to new pathoblockers in P. aeruginosa infections. 相似文献
Purpose: To investigate the effects of phosphoric acid esters (PAEs)-containing primers on the micro-tensile bond strengths (MTBS) of etched enamel, the micro-morphologies of the resin–enamel interfaces, and the enamel surfaces.
Materials and Methods: Thirty-three bovine incisors were used in this study. After the labial enamel surfaces were highly polished, they were etched, water sprayed, and air-dried. Afterward, the enamel surfaces were treated with or without (control) one of three PAEs-containing primers (40%MDP, Ivoclar Vivadent; Resulcin AquaPrime A + B, DMG; Xeno V, Dentsply), water sprayed, and air-dried. Subsequently, an adhesive Heliobond (Ivoclar Vivadent) was applied and resin composite (Core Build-up, Bisco) was placed incrementally. They were prepared into multiple beams of about 1 × 1 × 8 mm for MTBS tests. The enamel surfaces and resin–enamel interfaces were analyzed by SEM and TEM. The data were analyzed by two-way ANOVA and LSD test.
Results: Using PAEs-containing primers could increase the enamel MTBS (p < 0.05). The primer MDP produced higher MTBS than the primer Resulcin AquaPrime A + B and Xeno V. The SEM findings revealed the primed enamel surfaces were covered with a thin or glue-like layer of monomer-calcium salts of PAEs and the residual enamel crystallites, and various micro-porosities were detected within the hybrid layers. The TEM findings revealed the hydroxyapatite crystallites were tightly covered by the adhesive, the adhesive mixed with resin composite, or sparse irregular enamel crystallites.
Conclusion: The application of PAEs-containing primers on the etched enamel substrate could significantly increase the immediate enamel bond strengths. However, this effect was dependent on the individual PAEs-containing primer used. 相似文献
Colour tuning of white polymer light emitting diode (LED) light sources can be attained by various methods at various stages in the production process of the lamps and/or by the design of the active material incorporated in the LEDs. In this contribution we will describe the methods and discuss the physical background of colour tuning. Furthermore, the material design has led to polymers which are more stable during electrical stress, so that colour shift during lifetime can be excluded for white polymer LEDs. 相似文献
To date, research into reconfigurable mobile communications has predominantly focussed on the software radio concept, and specifically on the hardware technologies required to move physical layer processing into a programmable environment [1, 2, 3]. Although an interesting and necessary challenge, this only represents a fraction of the overall support and technology required to realise the potential of the concept. Other necessary developments include network/terminal cooperation for seamless inter-standard handoff, QoS management for software download and reconfiguration, a secure software download mechanism, terminal software and mobile radio network architecture supporting terminal reconfiguration, management for software downloads, configuration management, capability negotiation, radio resource management and spectrum allocation policies etc… This paper describes results from the EuropeanIst Trust (Transparently Reconfigurable UbiquitouS Terminal) [4] project concerning user and operator requirements, the proposed overall system environment, security issues, concerted radio resource management, and expected time frame for the development of reconfigurable terminals. 相似文献