NanoProbeArrays for the analysis of ultra-low-volume protein samples using piezoelectric liquid dispensing technology

Antibody microarrays are gaining popularity as a high-throughput technology to investigate the proteome. However, protein extracts from most body fluid or biopsy samples are available in very small volumes and are often unsuitable for large-scale antibody microarray studies. To demonstrate the potential for protein analysis with as little as a few nanoliters of sample, we have developed a new technology called NanoProbeArrays based on piezoelectric liquid dispensing for non-contact printing and probing of antibody arrays. Instead of flooding the protein sample on the antibody microarray surface, as in conventional microarray screening, a piezoelectric inkjet printer is used to dispense nanoliters of fluorescently labeled proteins over the antibody spots on the array. The ability of NanoProbeArrays to precisely identify and reliably distinguish between test proteins from different sources, without any loss of sensitivity and specificity as compared with conventional antibody microarrays, is illustrated here. The utility of NanoProbeArrays for biomarker identification in a complex biological sample was tested by detecting the cytokine interleukin-4 in serum. The significant reduction in volume of sample during NanoProbeArray analysis, as compared with conventional antibody microarrays, offers new opportunities for basic and applied proteomic research.     

A new generation of power supplies for electron beam welding machines

Widely used electron beam welding machines are equipped with heavy power supplies, located in a special oil tank and connected with an electron gun to a high-voltage cable. A special system detects electric discharges in the electron gun space, which may arise during welding and then it tries to switch off the high voltage to interrupt an electric arc. Such disadvantages have been eliminated with the novel power supply described here. The Q of resonance circuit of this supply is stabilized and as a result circulating power appears. During an electric discharge in the gun, power is not sent to the electron gun but circulates between the electronic parts of the resonance circuit without losses and “waits” for the break in the short circuit. The power supply is much smaller and lighter than supplies of similar rating used nowadays. It is connected directly to the electron gun chamber without a high-voltage cable. The first construction of the supply was designed for electron beam welding machine of 5 kW power and 60 kV accelerating voltage. Tests of the new power supply in laboratory and industrial conditions have shown its usefulness for electron beam welding.     

Influence of Unmodified and β-Glycerophosphate Cross-Linked Chitosan on Anti-Candida Activity of Clotrimazole in Semi-Solid Delivery Systems

The combination of an antifungal agent and drug carrier with adjunctive antimicrobial properties represents novel strategy of complex therapy in pharmaceutical technology. The goal of this study was to investigate the unmodified and ion cross-linked chitosan’s influence on anti-Candida activity of clotrimazole used as a model drug in hydrogels. It was particularly crucial to explore whether the chitosans’ structure modification by β-glycerophosphate altered its antifungal properties. Antifungal studies (performed by plate diffusion method according to CLSI reference protocol) revealed that hydrogels obtained with chitosan/β-glycerophosphate displayed lower anti-Candida effect, probably as a result of weakened polycationic properties of chitosan in the presence of ion cross-linker. Designed chitosan hydrogels with clotrimazole were found to be more efficient against tested Candida strains and showed more favorable drug release profile compared to commercially available product. These observations indicate that novel chitosan formulations may be considered as promising semi-solid delivery system of clotrimazole.     

Hydroxyl Functionalized Methacrylic Terpolymers as Supports for Mn(III) Salen Catalysts and Their Application in Asymmetric Epoxidation

Hydroxyl functionalized gel type resins derived from 2-hydroxyethyl, 2-hydroxypropyl and 2-hydroxy-3-phenoxypropyl methacrylates were applied to covalent immobilization of Mn(salen) complexes via glutarate and carbonate linkers. The obtained catalysts were characterized by FTIR and DR UV–Vis methods and elemental analysis. It was found that the activity of polymeric catalysts obtained in this way depended on both the nature of the functional and cross-linking monomers and the degree of the cross-linking of polymer matrices and the way of complex immobilization. The highest activity was observed for the complexes immobilized on the HEMA resins cross-linked with 3%-mol of diethylene glycol dimethacrylate. For instance, in the presence of the catalysts with (S,S)-salen ligand S-epoxystyrene and (1S, 2R)-epoxyindene could be obtained with 46% and 69% ee, respectively. Attempts have also been made to recycle the selected catalyst. However, a rapid fall off in the activity was observed, although the selectivity was similar in which three cycles.     

Current state and perspectives for oilseed rape production for energy purposes in Poland

The article aims to analyze the current state and determine the perspectives for oilseed rape production for energy purposes in Poland. According to the study, in recent years the oilseed rape area for energy purposes and the production of biocomponents and biofuels from oilseed rape have been on the rise in Poland. The considerable and spatially concentrated energy potential of oilseed rape in Poland is noted. It is indicated that the greatest energy potential of the oilseed rape production is the four neighboring voivodeships: Dolno?l?skie, Opolskie, Wielkopolskie, and Kujawsko-Pomorskie.     

The effect of reaction product on the rate of addition of acetic acid to epichlorohydrin in the presence of chromium(III) acetate

The kinetics of addition of acetic acid to epichlorohydrin carried out in the presence of both the reaction product and chromium(III) acetate catalyst have been studied. At an equimolar ratio of reagents the dilution of the reacting mixture with the reaction product has been found not to affect the reaction order. The presence of product in the starting mixture, as well as temperature increase, considerably reduces the selectivity of reaction. Side reactions of epichlorohydrin are activated. Activation energy, enthalpy and entropy of the reaction all decrease in the presence of reaction product. © 2001 Society of Chemical Industry     

Electrodynamic forces within metal cylinder ǵenerated by short-circuit current

Contents A numerical method for calculation of the electrodynamic forces within a conducting bar of infinite length due to a short-circuit current flowing through conductors parallel to this bar is presented. The integral methods are applied. As an example the electrodynamic forces as a function of position and time are given. The excitation current as the transient short-circuit current of the transformer is applied.

---

Durch Kurzschlußströme bewirkte elektrodynamische Kräfte auf einen metallischen Zylinder

Übersicht Die numerische Methode für die Berechnung der elektrodynamischen Kräfte auf einen unendlich langen elektrischleitenden Zylinder, der sich in der Nähe einer Kurzschlußstrom führenden und dem Zylinder parallelen Leiterschleife befindet, wird dargestellt. In einem numerischen Beispiel werden die elektrodynamischen Kräfte als Funktionen des Ortes und der Zeit des Transformatorkurzschlußstromes berechnet.

---

List of principal symbols A vector potential (y-component) - B vector of magnetic flux density - F vector of unit-length force - i(t) current - I(s) Laplace transform ofi(t) - J matrix of current density - s complex frequency - R matrix response of linear system - T(j) matrix frequency response - t time - U() real part of matrix frequency response - u(t) unit step function - X() imaginary part of matrix frequency response - x,y,z rectangular coordinates - ₀ permeability of vacuum - conductivity of tape - _ij Kronecker delta - angular frequency     

Application of hammerhead ribozymes for structural studies of ribosomal 5S RNAs

We evaluated the possibility that distinct proteolytic pathways contribute to the down-regulation of a novel (epsilon) or conventional (alpha) isoform of protein kinase C (PKC) in nonimmortalized human fibroblasts. Inhibitors of calpains and other cysteine proteinases, vesicle trafficking, or lysosomal proteolysis did not affect the down-regulation of PKC-alpha or -epsilon produced by bryostatin 1 (Bryo). Lactacystin (Lacta) and certain terminal aldehyde tripeptides or tetrapeptides, which selectively inhibit the proteasome, preserved substantial PKC-alpha and -epsilon protein from down-regulation by Bryo or phorbol-12-myristate-13-acetate. Lacta preserved active kinase in vivo, as shown by the retention of Bryo-induced autophosphorylated PKC-alpha. Concomitant with down-regulation, Bryo produced PKC-alpha and -epsilon species that were larger than the native proteins (80 and 90 kDa, respectively). Western blot analysis showed that the larger PKC-alpha species were ubiquitinylated. Treatment with Bryo plus Lacta synergistically increased multiubiquitinylated PKC-alpha, as expected if Bryo induces ubiquitinylation of PKC-alpha and Lacta blocks its degradation. Bryo also produced a 76-kDa, nonphosphorylated form of PKC-alpha and an 86-kDa form of PKC-epsilon. Phosphatase inhibitors decreased production of 76- and 86-kDa PKC-alpha and -epsilon by Bryo and preserved 80- and 90-kDa PKC-alpha and -epsilon, respectively. Our results suggest that the down-modulation of PKC-alpha and -epsilon occurs principally via the ubiquitin/ proteasome pathway. Dephosphorylation seems to predispose PKC to ubiquitinylation.