Correlation properties of combiners with memory in stream ciphers

For pseudo-random generators where one or several LFSRs are combined by a memoryless function, it is known that the output sequences are correlated to certain LFSR-sequences whose correlation coefficients c _t satisfy the equation _i c ₂ ⁱ = 1. In this paper it is proved that a corresponding result also holds for generators whose LFSRs are connected to a combiner with memory.If correlation probabilities are conditioned on side information, e.g., on known output digits, it is shown that new or stronger correlations may occur. This is exemplified for the summation cipher with only two LFSRs where such correlations can be exploited in a known plaintext attack. A cryptanalytic algorithm is given which is shown to be successful for LFSRs of considerable length and with arbitrary feedback connection.A preliminary version of this paper was presented at Eurocrypt '90, May 21–24, Århus, Denmark, and has appeared in the proceedings, pp. 204–213.     

Increasing the usefulness of additive spline models by knot removal

Modern techniques for fitting generalized additive models mostly rely on basis expansions of covariates using a large number of basis functions and penalized estimation of parameters. For example, a mixed model approach is used to fit a model for children’s lung function that allows for non-linear influence of several covariates available in a substantial data set. While the resulting model is expected to have good prediction performance, its handling beyond simple visual presentation is problematic. It is shown how the number basis functions of the underlying B-spline representation can be reduced by knot removal techniques without refitting, while preserving the shape of the fitted functions. The condition for exact knot removal is extended towards approximate knot removal by incorporating the covariance matrix of the initial parameter estimates, resulting in considerable simplification of the model. Covariance matrices for the transformed parameter estimates are provided. It is demonstrated that enforcing the knot removal condition during estimation leads to the difference penalties employed in the P-spline approach for estimation of B-spline coefficients, and therefore provides a further justification for this type of penalty. A final transform to a truncated power basis provides a simple equation for the model. This increases transportability, while retaining properties of the initial fit such as good prediction performance.     

An Overview and Future Perspectives of Aluminum Batteries

A critical overview of the latest developments in the aluminum battery technologies is reported. The substitution of lithium with alternative metal anodes characterized by lower cost and higher abundance is nowadays one of the most widely explored paths to reduce the cost of electrochemical storage systems and enable long‐term sustainability. Aluminum based secondary batteries could be a viable alternative to the present Li‐ion technology because of their high volumetric capacity (8040 mAh cm^?3 for Al vs 2046 mAh cm^?3 for Li). Additionally, the low cost aluminum makes these batteries appealing for large‐scale electrical energy storage. Here, we describe the evolution of the various aluminum systems, starting from those based on aqueous electrolytes to, in more details, those based on non‐aqueous electrolytes. Particular attention has been dedicated to the latest development of electrolytic media characterized by low reactivity towards other cell components. The attention is then focused on electrode materials enabling the reversible aluminum intercalation‐deintercalation process. Finally, we touch on the topic of high‐capacity aluminum‐sulfur batteries, attempting to forecast their chances to reach the status of practical energy storage systems.     

How to shift 100,000 products toward sustainability: creating a sustainable assortment at Haberkorn

Haberkorn is Austria’s biggest industrial wholesaler with ~1,000 employees and an annual turnover of about 260 Mill €. The range of goods consists of about 100,000 articles. Their goal: A sustainable assortment. The challenge: Assessing all the products and defining a sustainable product line. Goal and challenge are based on a corporate decision made by the management board: sustainability should meet the core business. As a scientific and implementation partner Haberkorn chose the Austrian Institute of Ecology. It is obvious that Life Cycle Assessments (LCAs) for 100,000 articles are hardly feasible. Hence, a special screening tool for estimating the sustainability potential on product group level in a quick and efficient way had to be developed. The screening tool consists of three categories to be rated: risks, chances, and strategic impact. Product groups with a high score are chosen for further treatment as “sustainability candidates.” In addition, a questionnaire concerning the sustainability performance, knowledge about the supply chain, and willingness to cooperate was sent to all suppliers, and basic facts concerning environmental, health, safety, and social aspects of the major materials used in the products were compiled (material manual). All product line managers have used the screening to detect the sustainability potential of their product groups, and the coached assessment process on individual product basis has started successfully. The next steps consist of the transformation process of sustainability candidates into a sustainability assortment and the evaluation process of high risk articles. This ought to result in improvement or potential elimination of products which jeopardize the user’s health, generate environmental damages, are produced under poor working conditions, etc.     

Starch Consolidation Casting of Cordierite Precursor Mixtures—Rheological Behavior and Green Body Properties

The rheology of suspensions and mechanical properties of green bodies with cordierite composition (raw materials 37 wt% kaolin, 41 wt% talc, 22 wt% alumina, resulting in 46.6 wt% SiO₂, 38.1 wt% Al₂O₃, 13.6 wt% MgO) and two types of starch (corn or potato) are investigated. Rotational viscometry of suspensions with solids loading 50, 60, and 70 wt% without starch showed that all tend to be shear‐thinning with a small degree of thixotropy. Suspensions with a total solids loading of 60 wt% with 25 wt% replaced by starch exhibited higher viscosity and thixotropy, but the viscometric behavior is almost identical for the two starch types (apparent viscosities 130–50 mPa ·s). Oscillatory rheometry shows that for suspensions with potato starch the onset temperature for gelatinization is 61°C–63°C, that is, lower than for corn starch (72°C–73°C). Maximum storage moduli and phase shift values after gelatinization are similar for both systems. The mechanical properties of green disks, measured via diametral compression tests, reveal clear differences between materials prepared with corn and potato starch, with the latter showing higher elastic modulus, higher strength, and higher deformation at fracture, obviously because of incompletely gelatinized starch granules in the green bodies prepared with corn starch .     

Urea hydrolysis and precipitation dynamics in a urine-collecting system

Blockages caused by inorganic precipitates are a major problem of urine-collecting systems. The trigger of precipitation is the hydrolysis of urea by bacterial urease. While the maximum amount of precipitates, i.e. the precipitation potential, can be estimated with equilibrium calculations, little is known about the dynamics of ureolysis and precipitation. To gain insight in these processes, we performed batch experiments with precipitated solids and stored urine from a urine-collecting system and later simulated the results with a computer model. We found that urease-active bacteria mainly grow in the pipes and are flushed into the collection tank. Both, bacteria and free urease, hydrolyse urea. Only few days are necessary for complete urea depletion in the collection tank. Two experiments with precipitated solids from the pipes showed that precipitation sets in soon after ureolysis has started. At the end of the experiments, 11% and 24% of urea was hydrolysed while the mass concentration of newly formed precipitates already corresponded to 87% and 97% of the precipitation potential, respectively. We could simulate ureolysis and precipitation with a computer model based on the surface dislocation approach. The simulations showed that struvite and octacalcium phosphate (OCP) are the precipitating minerals. While struvite precipitates already at low supersaturation, OCP precipitation starts not until a high level of supersaturation is reached. Since measurements and computer simulations show that hydroxyapatite (HAP) is the final calcium phosphate mineral in urine solutions, OCP is only a precursor phase which slowly transforms into HAP.     

同时提取大豆中的油脂和蛋白质的工艺

近几年来 ,国外油脂科技的发展非常迅速 ,特别是在油脂工程的大型化、规模化 ,以及油脂工厂自动控制方面发展尤为迅速 ,同时 ,在油脂、油料蛋白及其功能性的研究方面也取得了不少重要成果。应广大读者的要求 ,《中国油脂》杂志从本期开始增加“国外动态”栏目 ,以期让广大读者了解更多国外新技术的动态。本期我刊选编了由国家粮食储备局西安油脂科学研究设计院武丽荣工程师根据“2 0 0 2年北京国际大豆技术及开发合作研讨会暨展示会 (CISCE2 0 0 2 )”的论文编译了几则有关油脂加工方面的论文 (摘编 ) ,这些论文从不同侧面反映了国外油脂行业的一种信息 ,以促进我国油脂工业的发展 ,进而促进我国油脂行业的科技进步     

Elastic properties of porous oxide ceramics prepared using starch as a pore-forming agent

The elastic properties, in particular the tensile modulus (Young's modulus) and Poisson ratio, of porous alumina, zirconia, and alumina–zirconia composite ceramics are studied using the resonance frequency method and the results compared with theoretical predictions. Starch is used as a pore-forming agent, so that the resulting microstructure is essentially of the matrix-inclusion type (with large bulk pores, connected by small throats when a percolation threshold is exceeded). It is found that for this type of microstructure the porosity dependence of the Young's modulus is significantly below the upper Hashin–Shtrikman bound and the power-law prediction; it corresponds well, however, to a recently proposed exponential relation and to an empirical volume-weighted average of the upper and lower Hashin–Shtrikman bounds. Results for all three types of ceramics indicate that – in the porosity range considered, i.e. up to approximately 50% – the Poisson ratio depends only slightly on porosity.