Reliability studies on GaAs MESFETs fabricated using spin-onplatinum source

GaAs MESFETs were fabricated using a spin-on platinum source as the gate material. They were subsequently aged at 200°C for up to 1000 h. DC electrical characterisation of the MESFETs was carried out during various stages of annealing. The aging behaviour of these MESFETs was compared with those fabricated using conventionally evaporated platinum sources. The results show that the performance of the MESFETs fabricated using a spin-on platinum source is comparable to those of MESFETs fabricated using a conventionally evaporated platinum source     

Mathematical analysis of dynamic channel selection in indoor mobilewireless communication systems

Dynamic channel selection (DCS) is an algorithm for flexible resource sharing in mobile radio systems. The digital enhanced cordless telecommunications (DECT) standard implements a version of DCS based on time as well as frequency multiplexing. In this paper, mathematical models are developed to evaluate the probabilities of channel availability, desired carrier power, and the carrier-to-interference ratio (CIR) for a constant traffic load. These results can be used to compute the call setup blocking probability. The models reported in this study are based on a decentralized DCS according to the DECT standard specifications. The results show that blocking due to availability of a channel (resource blocking), not interference blocking, generally is the most important factor in overall call blocking. Furthermore, it is seen that resource blocking is sensitive to the implementation of portable sets. Also, with homogeneous static traffic, this type of DCS ran be as good as fixed channel allocation (FCA) with respect to resource blocking     

Association of angiotensin-converting enzyme gene I/D polymorphism with change in left ventricular mass in response to physical training

PURPOSE: To determine the radiologic characteristics of cystic dystrophy of the duodenal wall. MATERIALS AND METHODS: Ten patients with cystic dystrophy of the duodenal wall and chronic pancreatitis underwent ultrasonography (US) (n = 10), computed tomography (CT) (n = 10), endoscopic US (n = 5), and endoscopic retrograde cholangiopancreatography (ERCP) (n = 9). Cystic dystrophy of the duodenal wall was classified as either cystic or solid. The imaging findings were retrospectively analyzed and compared with findings at pancreatoduodenectomy (n = 10). RESULTS: The more frequent cystic type (n = 7) of cystic dystrophy of the duodenal wall was characterized by the presence of easily recognizable cystic lesions (diameter, more than 1 cm), located within the thickened wall of the second portion of the duodenum. The solid type (n = 3) of cystic dystrophy of the duodenal wall demonstrated fibrous thickening of the duodenal wall within which small cysts (diameter, less than 1 cm) were present. The intraduodenal cysts were usually elongated or bilobate with a thick wall. The thickening of the duodenal wall appeared as a solid layer between the duodenal lumen and the pancreas, hypoechoic at US, isoattenuating at unenhanced CT, and hypoattenuating in the early phase (after initiation of infusion of contrast material) and isoattenuating in the late phase (after completion of infusion) at contrast material-enhanced CT. Findings at retrospective analysis of CT and endoscopic US images were characteristic. CONCLUSION: Imaging modalities, notably CT and endoscopic US, helped establish the diagnosis of cystic dystrophy of the duodenal wall.     

Performance evaluation of a teletext system

Four parameters are defined to measure the performance of a teletext system, namely, the probability of delivering a message within specified time, the transmission efficiency, the average number of errors per page, and the throughput. Each of them is derived and computational results are presented taking the UK teletext system as an example. These parameters are compared in their ability to characterize the performance of the teletext system     

Advancing controlled release packaging through smart blending

Researchers from Rutgers University and Clemson University have collaborated to develop a concept of using smart blending to generate functional packaging films for the controlled release of active compounds such as antimicrobials, antioxidants and flavour compounds to extend the shelf‐life of food. In this paper, literature results are reviewed to justify the significance of controlled release packaging (CRP) and the research gaps for further development are identified. A major research gap is the lack of packaging materials that can provide the release of active compounds at rates suitable for a wide range of food packaging applications. Smart blending is a promising technology for bridging this research gap. To fully realize the potentials of smart blending, a systematic approach for developing CRP using smart blending is also presented. Copyright © 2005 John Wiley & Sons, Ltd.     

Performance of a non‐load‐bearing steel stud gypsum board wall assembly: Experiments and modelling

A gypsum wall assembly was exposed to an intense real‐scale compartment fire. For the wall assembly, temperatures were measured at the exposed face, within the stud cavity, and at the unexposed face during the fire exposure. Total heat flux gauges were used to measure the temporal variation of the energy incident on the walls, and cameras, both visual and infrared, were used to image the unexposed face of the wall assembly during the fire exposure. The behaviour of the wall assembly under the fire load is discussed as are current model results for a simulation of the fire test. Copyright © 2006 John Wiley & Sons, Ltd.