Polarity control of GaN epilayers grown on ZnO templates

We report the successful growth of Ga-polar GaN epilayers on O-polar ZnO templates pre-deposited on c-sapphire. Prior to GaN growth, NH₃ is exposed onto the ZnO template. The polarity of the GaN layers is confirmed by etching of the surface and by conversion beam electron diffraction (CBED), while the O-polar ZnO is confirmed by CBED. It is suggested that the NH₃ pre-exposure helps form a Zn₃N₂ layer, which possesses inversion symmetry and inverts the crystal from anion polar to cation polar.     

Hydroliquefaction of low-sulfur coals using iron carbonyl complexes—Sulfur as catalysts

Hydroliquefaction of low-sulfur Australian coals (Wandoan and Yallourn) was studied using iron carbonyl complexes as catalyst. The addition of Fe(CO)₅ (2.8 wt% Fe of coal) increased coal conversion from 48.6 to 85.2% for Wandoan coal, and from 36.7 to 69.7% for Yallourn coal in 1-methylnaphthalene at 425°C under an initial hydrogen pressure of 50 kg cm^?2. When molecular sulfur was added to iron carbonyls (Fe(CO)₅, Fe₂(CO)₉ and Fe₃(CO)₁₂), higher coal converions ( > 92%) and higher oil yields (>46%) were obtained, along with an increase in the amount of hydrogen transferred to coal from the gas phase (0.2 to 2.8%, d.a.f. coal basis). In the liquefaction studies using a hydrogen donor solvent, tetralin, Fe(CO)₅S catalyst increased the amount of hydrogen absorbed from the gaseous phase and decreased the amount of naphthalene dehydrogenated from tetralin. The direct hydrogen transfer reaction from molecular hydrogen to coal fragment radicals seems to be a major reaction pathway. Organic sulfur compounds, dimethyldisulfide and benzothiophene, and inorganic FeS₂ and NiS were found to be good sulfur sources to Fe(CO)₅. From X-ray diffraction analyses of liquefaction residues, it is concluded that Fe(CO)₅ was converted into pyrrhotite (Fe_1?xS) when sulfur was present, but into Fe₃O₄ in the absence of sulfur.     

Simple systolic arrays for discrete cosine transform

in this paper, simple 1-D and 2-D systolic array for realizing the discrete cosine transform (DCT) based on the discrete Fourier transform (DFT) fo an input sequence are presented. The proposed arrays are obtained by a simple modified DFT (MDFT) and an inverse DFT (IDFT) version of the Goertzel algorithm combined with Kung's approach. The 1-D array requiresN cells, one multiplier and takesN clock cycles to produce a completeN-point DCT. The 2-D array takes N clock cycles, faster than the 1-D array, but the area complexity is larger. A continuous flow of input data is allowed and no idle time is required between the input sequences.     

Modeling of the pharyngeal muscle in Caenorhabditis elegans based on FitzHugh-Nagumo equations

The pharyngeal pumping motion to send food to the bowel is a rhythmic movement in Caenorhabditis elegans. This paper proposes a simulation-based approach to investigate the mechanisms of rhythm phenomena in the pharyngeal pumping motion. To conduct the simulations, first, we developed a pharyngeal muscle model including 29 cell models which simulate the activity of each cell as a membrane potential based on FitzHugh-Nagumo equations. Then, to compare the response of the model with that of C. elegans, we calculated the electropharyngeogram (EPG), which represents the electrophysiological responses of the pharyngeal cells, using the simulated membrane potentials. The results confirmed that our model could generate the EPG similar to that measured from C. elegans. We proposed a computer simulation of the pumping motion to investigate the mechanisms of rhythm phenomena in living organisms.     

A PRACTICAL METHOD FOR RECTIFYING INTERFACIAL TENSION DATA TO PREDICT THE SHAPE OF INTERFACES IN AN IMMISCIBLE LIQUID/LIQUID/GAS SYSTEM

The shape of interfaces formed by the contact of two liquid phases, immiscible with each other, and a gaseous phase can be predicted on the condition that the tension to work at each interface is known with a sufficient accuracy. In general, interfacial tension data available are not so accurate, however, as to be useful as they are in predicting the shape of interfaces, particularly when the spreading coefficient of either liquid (liquid 1) on the other (liquid 2) has a negative value of a small magnitude. Presented in this note is a simple method to rectify the interfacial tension data, with the aid of a measurement of the radius of a lens of liquid 1 of a known volume placed on the horizontal surface of liquid 2, and thereby make them usable for predicting interfacial geometries. The method is tested by applying it to benzene/water and n-pentane/water systems.     

Electrochemical formation of Sm-Co alloys by codeposition of Sm and Co in a molten LiCl-KCl-SmCl3-CoCl2 system

Electrocodeposition of Sm and Co on a Cu substrate was investigated in a molten LiCl-KCl-SmCl₃ (0.5 mol.%)-CoCl₂ (0.1 mol.%) system at 723 K. Phase of the deposited Sm-Co alloys could be controlled by electrolysis potential. SmCo₃ was formed on a Cu substrate by potentiostatic electrolysis in the potential range of 0.20-0.90 V (vs. Li⁺/Li). Sm₂Co₁₇ was obtained in the potential range of 0.90-1.50 V.     

Proposal of variable sequential sampling plan having desired operating characteristics indexed by quality loss

The proportion of non-conforming items has been traditionally utilised as an evaluation criterion for quality of items. However, the proportion of non-conforming items is not necessarily useful as a proper evaluation criterion for controlling high-quality manufacturing in recent years. Accordingly, in order to achieve further quality improvement and innovation, more careful quality evaluation has been required newly. Then, a concept of quality loss in the Taguchi methods has been devised as a severe criterion of quality evaluation. Hereby, a variable single sampling plan having desired operating characteristics (OCs) indexed by quality loss has been proposed in the area of statistical quality control. By the way, the most economical sampling inspection in the average sample number (ASN) is the sequential sampling plan based on the Wald’s sequential probability ratio test. Then, from the viewpoint of cost reduction, we discuss a variable sequential sampling plan having desired OC indexed by quality loss with the aim of expansion of the utility of variable sampling plan for quality loss. As the result, the design procedure of the sequential sampling plan for satisfying some required design conditions indexed by quality loss is provided. In addition, the effectiveness of the proposed sequential sampling plan is verified through some numerical examples.     

Level-of-Detail Rendering of Large-Scale Irregular Volume Datasets Using Particles

This paper describes a level-of-detail rendering technique for large-scale irregular volume datasets. It is well known that the memory bandwidth consumed by visibility sorting becomes the limiting factor when carrying out volume rendering of such datasets. To develop a sorting-free volume rendering technique, we previously proposed a particle-based technique that generates opaque and emissive particles using a density function constant within an irregular volume cell and projects the particles onto an image plane with sub-pixels. When the density function changes significantly in an irregular volume cell, the cell boundary may become prominent, which can cause blocky noise. When the number of the sub-pixels increases, the required frame buffer tends to be large. To solve this problem, this work proposes a new particle-based volume rendering which generates particles using metropolis sampling and renders the particles using the ensemble average. To confirm the effectiveness of this method, we applied our proposed technique to several irregular volume datasets, with the result that the ensemble average outperforms the sub-pixel average in computational complexity and memory usage. In addition, the ensemble average technique allowed us to implement a level of detail in the interactive rendering of a 71-million-cell hexahedral volume dataset and a 26-million-cell quadratic tetrahedral volume dataset.     

Particle-based multiple irregular volume rendering on CUDA

In this paper, we describe an improved particle-based volume rendering (PBVR) technique for previewing a large irregular volume dataset using the CUDA architecture. This technique allows for opaque and emissive particles to render translucent volumes without visibility sorting. Our GPU acceleration of PBVR provides the multi-volume rendering feature while remaining compatible with both regular and irregular volumes. We also reduce the memory cost required for storing all sub-pixel values by proposing a pixel repetition technique for a large sub-pixel level. By adjusting the repetition level, we achieved a very smooth level of detail (LOD) control for trading quality for speed. Our work demonstrates a full-detail rendering rate from 5 to 10 fps for irregular volume data with mega-scale cell numbers on an NVIDIA GeForce 8800GTS.