Re-evaluation of Radiation-Energy Transfer to an Extraction Solvent in a Minor-Actinide-Separation Process Based on Consideration of Radiation Permeability

ABSTRACT

Absorbed-dose estimation is essential for evaluation of the radiation tolerance of minor-actinide-separation processes. We propose a dose-evaluation method based on radiation permeability, with comparisons of heterogeneous structures seen in the solvent-extraction process, such as emulsions forming in the mixture of the organic and aqueous phases. A demonstration of radiation-energy-transfer simulation is performed with a focus on the minor-actinide-recovery process from high-level liquid waste with the aid of the Monte Carlo radiation-transport code PHITS. The simulation results indicate that the dose absorbed by the extraction solvent from alpha radiation depends upon the emulsion structure, and that from beta and gamma radiation depends upon the mixer-settler-apparatus size. Non-negligible contributions of well-permeable gamma rays were indicated in terms of the plant operation of the minor-actinide-separation process.     

Radiophotoluminescence phenomenon in copper-doped aluminoborosilicate glass

Radiophotoluminescence phenomena have been widely investigated on various types of materials for dosimetry applications. We report that an aluminoborosilicate glass containing 0.005 mol% copper exhibits intense photoluminescence in the visible region induced by X-ray and γ-ray irradiation. The luminescence is assigned to the 3d⁹4s¹ → 3d¹⁰ transition of Cu⁺. The proportionality of the intensity of the induced photoluminescence to the irradiation dose was confirmed up to 0.5 kGy using ⁶⁰Co γ-ray irradiation. Based on the spectroscopic results, a potential mechanism was proposed for the enhancement of the photoluminescence. The exposure to the ionizing radiation generates electron-hole pairs in the glass, and the electrons are subsequently captured by the Cu²⁺ ions, which are converted to Cu⁺ and emit the luminescence. For the glass containing 0.01 mol% copper, the pronounced enhancement of the photoluminescence was not observed because the reverse reaction, ie, the capture of the holes by the Cu⁺ ions, becomes prominent. The photoluminescence induced by the irradiation was stably observed for the glasses kept at room temperature and even for the glasses heat-treated at 150°C. However, the induced photoluminescence could be eliminated by the heat treatment at a temperature at 500°C, and the glass returned to the initial pre-irradiation state. The Cu-doped aluminoborosilicate glass is a potential candidate for use in dosimetry applications.     

A highly transparent and thermally stable copolymer of 1‐adamantyl methacrylate and styrene

Thermal and optical properties of copolymers of 1‐adamantyl methacrylate (AdMA) and styrene (St) prepared by free radical polymerization in the bulk are investigated. The copolymer forms an azeotrope when the composition is AdMA/St = 55/45 mol%. The glass transition temperature and decomposition temperature of the azeotropic copolymer are 170 and ca 340 °C, respectively. The refractive index increases nonlinearly with St content from 1.522 to 1.591. The light scattering loss at 633 nm is 28.1 dB km^?1, which is less than half of that of polystyrene. The total optical loss including molecular vibrational absorption, which is evaluated using a copolymer‐based optical fiber, is 292–645 dB km^?1 at 500–700 nm. These values correspond to transmittances of 86–93% for a 1 m optical path length. © 2014 Society of Chemical Industry     

Mechanisms of orientational and photoelastic birefringence generation of methacrylates for the design of zero–zero‐birefringence polymers

The intrinsic birefringence Δn⁰ and photoelastic coefficient C of poly(methyl methacrylate), poly(2,2,2‐trifluroethyl methacrylate), poly(phenyl methacrylate), and poly(2,2,3,3,3‐pentafluorophenyl methacrylate) were determined. We categorized these methacrylate polymers into four birefringence‐types, even though their molecular structures differed only by the substituents on the side chains. Based on the results of Δn⁰ and C, novel polymers that exhibit neither orientational nor photoelastic birefringence, i.e., zero–zero‐birefringence polymers, were designed and synthesized by quaternary copolymerization system. Furthermore, we confirmed that the mechanisms of orientational birefringence and photoelastic birefringence generation were different in these methacrylate polymers. The conformation of the repeat unit of the polymers was nearly constant during the generation of orientational birefringence. In contrast, the conformation of the repeat unit of the polymers changed during the generation of photoelastic birefringence in the glassy state. These findings demonstrated the reasonability of evaluating orientational and photoelastic birefringence separately, as well as the adequacy of the classification of polymers into four birefringence‐types. Given these results and the fact that zero–zero‐birefringence polymers could be prepared successfully by four‐birefringence type monomers, we demonstrated the reasonability of the method for designing the zero–zero‐birefringence polymers. POLYM. ENG. SCI., 55:1330–1338, 2015. © 2015 Society of Plastics Engineers     

Improvement in the DOA estimation of broadband signals usingpartially IIR beamformers

An ideal broadband beamformer requires an increased number of taps for each filter, which in turn increases the complexity of the design. It is shown that for angles near the broadside of the antenna the beamforming is more accurate compared to the angles near the endfire, and it is advantageous to use recursive filters combined with a computed number of zeros for angles near the endfire. The proposed method is used for estimating the arrival angle of the incoming signals and displays uniform accuracy for all angles     

Eosinophil chemotaxis induced by several biologically active substances and the effects of apafant on it in vitro

Chemotaxis of guinea pig eosinophils induced by various stimuli in use of a modified Boyden chamber technique in vitro and the effect of a platelet-activating factor (PAF) antagonist, apafant (CAS 105219-56-5, WEB 2086 BS), on it were examined. The eosinophils were obtained by bronchoalveolar lavage from the animals treated by i.v. injection with Sephadex G-200 and purified by Percoll density gradient centrifugation. PAF significantly and potently induced the chemotaxis at a broad range of 10(-17) to 10(-7) mol/l, where no concentration-dependency was observed. Leukotriene B4 also induced the chemotaxis in a concentration-dependent manner at 10(-14) to 10(-12) mol/l and the enhanced migration was not declined until 10(-7) mol/l. Interleukin-5 (IL-5), IL-8 and regulated on activation normal T expressed and secreted (RANTES) only modestly enhanced the chemotaxis in some concentrations at 10(-13) to 10(-7) mol/l with or without significance and with no concentration-dependency while formyl-methionyl-leucyl-phenylalanine (FMLP), a known chemoattractant, increased the migration at 10(-7) to 10(-5) mol/l. Apafant at 10(-8) to 10(-6) mol/l strongly and concentration-dependently inhibited 10(-8) mol/l PAF-induced chemotaxis. However, the drug showed nominal or no influences on their chemotaxis stimulated by the other agonists, at the concentrations of which the enhanced migration was observed. From these results, it is concluded that IL-5, IL-8 and RANTES, different from PAF and LTB4, are not potent stimuli for the eosinophil chemotaxis and that apafant is a selective antagonist of PAF, which is expected to be therapeutically effective for PAF-associated diseases including bronchial asthma.     

Superconductivity in the tetragonal phase of La1.9Bi0.1CuO4+δ annealed under high oxygen pressure

We have investigated the relation between the crystal structure and superconductivity in La_1.9Bi_0.1CuO_4+δ , in which the phase separation observed in La₂CuO_4+δ is suppressed. A phase diagram in theT?δ plane is given for La_1.9Bi_0.1CuO_4+δ with excess oxygen. For very smallδ values, the crystal structure is orthorhombic, and an orthorhombic-tetragonal phase transition occurs markedly atδ ～ 0.03 in the measured temperature range between 13 and 293 K. Superconductivity is observed in the range of 0.04<δ<0.11. This is clear evidence thathigh-T _c superconductivity also appears in the tetragonal phase.     

Percutaneous ethanol injection therapy by ethanol mixed with CO2 microbubble for hepatocellular carcinoma

One of the shortcomings of percutaneous ethanol injection therapy (PEIT) for hepatocellular carcinoma (HCC) is that many sessions are necessary to accomplish the treatment. This may be caused by which the ultrasonography (US) image does not reflect correctly to the kinetics of injected ethanol into HCC nodule. It is considered that number of treatment sessions are able to be reduced if we just enough injected labelled ethanol under US into HCC nodule. Therefore, we tried PEIT by ethanol mixed with CO2 microbubble (CO2 ethanol). The injected CO2 ethanol was aquired as hyperechoic image without strong acoustic shadow to the end of injection. Consequently we could reduce the number of treatment sessions to almost 1 for lesions < or = 3 cm in diameter and markedly reduce total dose of injected ethanol. The detectable rate of CO2 ethanol leaked out HCC nodule was high. No serious complication occurred. There have been only 1 lesion of local recurrence and no case of intrahepatic and peritoneal dissemination for 11.5 months on average of observation after PEIT by CO2 ethanol (CO2PEIT). These findings suggest that CO2PEIT is useful method for reducing the number of treatment sessions and total dose of injected ethanol, moreover preventing complication by ethanol leakage.     

Effects of pramipexole on contraversive rotation and functional motor impairments in 1-methyl-4-phenyl1,2,3, 6-tetrahydropyridine-induced chronic hemiparkinsonian monkeys

Rotational and functional motor behavioral changes were studied in five MPTP lesioned chronic hemiparkinsonian Macaca nemestrina monkeys after i.m. pramipexole, a predominant D2 subfamily agonist. Pramipexole induced contraversive rotations in a dose-dependent manner with an optimal dose of 56 microg/kg for approximately 2 to 4 hr after injection. Three different rating scales were used to determine drug-induced functional improvement. They included a monkey parkinsonism rating scale, volitional responses to fruit presentations, and number of hand movements that appeared volitional. A dose of 56 microg/kg of pramipexole produced functional improvements on hand disability, and on a parkinsonian rating scale for monkeys in a dose-dependent manner from 32 to 100 microg/kg. These doses produced an increase in significant hand movements in the affected (contralateral) as well as in the normal (ipsilateral) hand to the side of the brain lesion compared with 5% dextrose in water vehicle control. With a dose of 100 microg/kg, the therapeutic effects of pramipexole on hand movements were less than with 56 microg/kg, due to side effects such as scratching.