Amyloid beta-protein deposition in the leptomeninges and cerebral cortex

To further investigate the process of amyloid beta-protein (Abeta) deposition, we determined, using sensitive enzyme immunoassays, the levels of Abeta40 and Abeta42 (Abetas) in the soluble and insoluble fractions of the leptomeninges (containing arachnoid mater and leptomeningeal vessels) and cerebral cortices from elderly control subjects showing various stages of Abeta deposition and from patients affected by Alzheimer's disease (AD). In both locations, insoluble Abeta levels were higher by orders of magnitude than soluble Abeta levels. Soluble Abeta levels in cortices were much lower than those in leptomeninges. In insoluble Abeta in the cortex, Abeta42 was by far the predominant species, and Abeta42 in AD cortices was characterized by the highest degree of modifications in the amino terminus. In contrast, this Abeta42 predominance was not observed in insoluble Abeta in the leptomeninges, which were found to be able to accumulate Abetas to an extent similar to that in the cortex, on a weight basis. The levels of insoluble Abeta in the leptomeninges or cortex generally correlated with the degree of cerebral amyloid angiopathy or the abundance of senile plaque, respectively. However, the presence of plaque-free cortical samples showing significant levels of insoluble Abeta42 suggests that biochemically detectable Abeta accumulation precedes immunocytochemically detectable Abeta deposition in the cortex.     

Stabilization of inter-area and/or oscillatory modes in large-scale power system by voltage impedance power system (VIPS) apparatus based on decentralized control scheme

New technologies such as power electronics have made it possible to change continuously the impedance of a power system not only to control power flow but also to enhance stability. A power system incorporating a variable impedance apparatus such as a variable series capacitor (VSrC) and high-speed phase shifter (HSPS) is called VIPS (Variable Impedance Power System) by the authors. This paper proposes a novel control method of VIPS apparatus such as VSrC and HSPS installed at an interconnecting point for stabilizing inter-area unstable and/or oscillatory modes. The proposed design method of the control system is a kind of hierarchical decentralized control method of a large-scale power system based on a Lyapunov function. Under the proposed control scheme, each subsystem can be stabilized independently by local controllers such as AVR, speed governor and PSS, and then the whole interconnected system can be stabilized by VIPS apparatus taking into account interactions between subsystems. The effectiveness and robustness of the VIPS apparatus control are shown by numerical examples with model systems including a large-scale power system.     

OSP-P200最新开放式数控系统

上世纪90年代末，受到以国际互联网为代表的信息技术革命的影响，制造业为了构筑新的生产方法，开始引入各种信息技术工具。这是为了满足消费者品种多样化和个性化的需求，以大量生产为主的产品导向模式（Product Out）向多品种小批量的市场导向模式（Marketin）的变化为目的，充分利用信息技术和设计制造知识，更加快速和低价地向市场提供各种高附加价值产品。     

Effect of inorganic salt on adsorption of sodium alkyl sulfates and fatty acid sodium salts from aqueous solution onto ion exchange resins

The adsorption isotherms of sodium salts of alkyl sulfonic acid and fatty acid with various carbon numbers onto ion exchange resins were measured in the absence and in the presence of sodium chloride in aqueous solutions. In the absence of the inorganic salt, the amount of adsorption remarkably increased with an increase in the length of alkyl groups in the adsorbates. Furthermore, the amount of adsorption apparently decreased with addition of sodium chloride into the solutions and almost reached a constant value at high concentrations of NaCl. This behavior strongly suggested that the electrostatic interaction on the adsorption decreased with increasing salt concentration and that the effect of hydrophobic interaction seems to play an important role on adsorption.     

Studying re-opened bugs in open source software

Bug fixing accounts for a large amount of the software maintenance resources. Generally, bugs are reported, fixed, verified and closed. However, in some cases bugs have to be re-opened. Re-opened bugs increase maintenance costs, degrade the overall user-perceived quality of the software and lead to unnecessary rework by busy practitioners. In this paper, we study and predict re-opened bugs through a case study on three large open source projects—namely Eclipse, Apache and OpenOffice. We structure our study along four dimensions: (1) the work habits dimension (e.g., the weekday on which the bug was initially closed), (2) the bug report dimension (e.g., the component in which the bug was found) (3) the bug fix dimension (e.g., the amount of time it took to perform the initial fix) and (4) the team dimension (e.g., the experience of the bug fixer). We build decision trees using the aforementioned factors that aim to predict re-opened bugs. We perform top node analysis to determine which factors are the most important indicators of whether or not a bug will be re-opened. Our study shows that the comment text and last status of the bug when it is initially closed are the most important factors related to whether or not a bug will be re-opened. Using a combination of these dimensions, we can build explainable prediction models that can achieve a precision between 52.1–78.6 % and a recall in the range of 70.5–94.1 % when predicting whether a bug will be re-opened. We find that the factors that best indicate which bugs might be re-opened vary based on the project. The comment text is the most important factor for the Eclipse and OpenOffice projects, while the last status is the most important one for Apache. These factors should be closely examined in order to reduce maintenance cost due to re-opened bugs.     

Using selective precipitant for uranyl ions — Fundamental studies for evaluating the precipitant performance

We have developed a simple reprocessing process for spent FBR fuels using N-cyclohexyl-2-pyrrolidone (NCP) which has selective precipitation ability for UO₂²⁺ ions. It was confirmed that NCP has sufficient precipitation ability for UO₂²⁺ ions, decontamination capability (separation of UO₂²⁺ from simulated fission products), and resistance to γ-ray radiation in nitric acid solutions. These findings indicate that NCP is applicable to our reprocessing process. We have also evaluated performances of other precipitants such as N-n-propyl-2-pyrrolidone (NProP), N-n-butyl-2-pyrrolidone (NBP), and N-n-butyl-2-pyridone (NBPyr). It was found that higher decontamination factors (DFs) are obtained by using NProP and NBP. This can be interpreted that the hydrophobicity of NProP and NBP is lower than that of NCP. Furthermore, we have obtained an experimental result that the resistance of NBPyr to γ-ray radiation is superior to that of NCP.     

Experimental study of bubbly swirling flow in a vertical tube using ultrasonic velocity profiler (UVP) and wire mesh sensor (WMS)

Two-phase air-water bubbly swirling flow through a pipe is a complex turbulent flow and its prediction is still challenging. The present paper describes the experimental investigation of the air-water bubbly swirling flow in vertical co-current flow. Swirling flow is induced by a twisted tape in a 20 mm inner diameter pipe. The flow is investigated using Ultrasonic velocity profiler (UVP), which allows the measurement of liquid and gas velocities simultaneously. Furthermore, simultaneous measurement of void fraction is performed using Wire mesh sensor (WMS). The experimental results reveal that swirling flow has significant impact on bubbles’ distribution. In low liquid flow rate, the average bubble velocity is fairly uniform along the radial position and void fraction increases in the near wall region. However, increasing liquid flow rate at constant gas flow rate leads to increase in void fraction in the core region, this is mainly due to drift velocity which is affected by centrifugal force. Experimental findings and parametric trends based on the effects of swirling flow are summarized and discussed.     

Visible-light-active titanium oxide photocatalyst realized by an oxygen-deficient structure and by nitrogen doping

A visible-light (vis)-active titanium oxide photocatalyst was prepared by a simple wet process: the calcination of the hydrolysis product of Ti(SO₄)₂ with ammonia using an ordinary electric furnace in dry air at 400 °C. The color of this photocatalyst was vivid yellow and absorbed light in the blue (400 nm) to bluish-green (550 nm) region exclusively. Its structure was characterized to anatase with oxygen-deficient stoichiometry by XRD and X-ray photoelectron spectroscopy. Nitrogen was also detected, but only in trace amounts. Using blue-light-emitting diodes as a light source, 540 ppm of acetone was decomposed within 36 h and a stoichiometric yield of CO₂ was obtained. From the results of the crystalline size D, it was found that vis-activity could be realized on polycrystalline particles and the grain-boundaries (GBs) are thought to be important, since oxygen vacancies are easily created in GBs, which could form a GB state. Finally, we concluded that oxygen-deficient sites formed in GBs are important to emerge vis-activity, and nitrogen doped in the part of oxygen-deficient sites are important as a blocker for reoxidation.     

Patterning of Non-Linear Optical Crystals in Glass by Laser-Induced Crystallization

This paper reports recent progress in the patterning of non-linear optical crystals on the glass surface by laser irradiation. Two techniques for the writing of crystal lines have been developed, i.e., rare-earth (samarium) atom heat processing and transition metal atom heat processing, in which a continuous wave Nd:YAG laser (wavelength: λ=1064 nm) is irradiated to the glasses containing rare-earth (RE: Sm³⁺, Dy³⁺) ions or transition metal (TM: Ni²⁺, Fe²⁺, V⁴⁺) ions. The writing of crystal lines such as β-BaB₂O₄, Sm _x Bi_{1− x} BO₃, and Ba₂TiGe₂O₈ showing second harmonic generations has been successful. It is clarified from the azimuthal dependence of second harmonic intensity and polarized micro-Raman scattering spectra that crystal lines consist of highly oriented crystals along the crystal line growth direction. It is also possible to write two-dimensional crystal bending or curved lines by just changing the laser scanning direction. The mechanism of the laser-induced crystallization has been proposed.     

Environmentally friendly coloured materials: cellulose/titanium dioxide/inorganic pigment composite spherical microbeads prepared by viscose phase-separation method

In order to develop environmentally friendly coloured materials, cellulose composite spherical microbeads hybridised with titanium dioxide (TiO₂) particles and inorganic pigment were prepared by a phase-separation method using viscose and an aqueous solution containing sodium polyacrylate. Findings regarding the relationships between cellulose xanthate and the electronic characteristics of TiO₂ particles used in the cellulose/inorganic material composite sphering process are also reported. These findings suggest that the location of TiO₂ particles in cellulose microbeads is related to electrical repulsion between the xanthate (CSS⁻) group and TiO₂. The use of TiO₂ powder as colour pigment is limited, as its colour is white. The cellulose composite spherical microbeads covered with TiO₂ and Fe₂O₃ particles were developed by addition of iron oxide (Fe₂O₃). Their surfaces were viewed by laser microscope and using SEM images. These composite microbeads retained the photocatalytic property of TiO₂. Cellulose/TiO₂/Fe₂O₃ composite spherical microbeads with both colour function and photocatalytic properties were successfully prepared.