Highly reliable 200 mW AlGaAs laser diode with fundamental transverse mode

A highly reliable 200 mW AlGaAs laser diode with a fundamental transverse mode has been developed, by optimising its structure with a 0.8 mu m thick p-cladding layer, a 1200 mu m long cavity length, and a front facet coating with a low reflectivity of 2%. The maximum output power was 500 mW, and stable fundamental transverse mode operation was obtained up to 350 mW. Stable operation under 200 mW and 50 degrees C was confirmed for more than 1200 h. Optical feedback noise was below 3*10/sup -14/ Hz/sup -1/.<>     

A new method for power generation planning and problems of uncertainty

This paper presents a new method for power system planning which considers uncertainties of various system parameters as a part of the criterion function. The criterion function involves both the expected values of total system costs and the cost variances of different power plants. Previously, the authors proposed that these cost variances be evaluated from the existing power system plans in the form of the solutions to the inverse optimization problem, and then applied this procedure to the planning of power systems in Japan. However, because of the correlation between fuel and facility costs, the cost variances could not be determined as specific values. Here, to overcome this difficulty, the authors now introduce hydropower plants into the model as the so-called nonrisky elements and focus on the expenditure shares rather than the plant capacity shares. As a result, more reasonable results are obtained. This improved methodology is applied and the derived cost variances are shown. Further, using the resultant cost variances, the authors make Pareto-optimal power generation plans and demonstrate also the robustness of the method to price fluctuations.     

Differential regulation by hematopoietic growth factors of apoptosis and mitosis in acute myeloblastic leukemia cells

We evaluated the effects of various hematopoietic growth factors (HGFs) on the prevention of apoptosis in blasts from 19 patients with acute myeloblastic leukemia (AML) by assessing DNA ladder formation. After incubation without HGF, apoptosis was noted in all but two patients. HGFs prevented, did not affect, or enhanced apoptosis in 39 (60%), 14 (22%), or 12 (18%) of 65 suspension cultures, respectively. HGFs that prevented apoptosis also stimulated and/or synergized blast colony formation in 35 of 39 corresponding methylcellulose cultures. HGFs that alone stimulated colony formation also prevented apoptosis in all but two of 28 corresponding suspension cultures. In contrast, HGFs that did not prevent apoptosis also failed to stimulate growth in 17 of 26 corresponding methylcellulose cultures. HGFs that enhanced apoptosis alone never stimulated colony formation. After incubation, we noted enhanced c-fos and cjun genes as well as induction of p21 protein. An appropriate dose of HGF elevated c-fos, reduced c-jun and p21, induced G1/S transition, and inhibited apoptosis. In two patients, apoptosis was not induced after incubation. Cells not treated with HGF expressed no c-fos, c-jun, or c-myc, and remained in G0/G1. Taken together, our results support the conclusion that not only c-fos, cjun, and c-myc, but also p53 and p21 are required for blast apoptosis. HGF differentially prevents apoptosis and induces mitosis, and both events seem to be integral to the self-renewal of AML clonogenic cells.     

Psychological dimensions of risk assessment: Risk perception and risk communication

People fear risks and try to avoid them. With a basic innate drive of sensing risks and protecting safety, humans can survive both natural and man-made catastrophes. Modern science and technology considerably serve for predicting risks and lend themselves to increasing protection for humans. In recent years, however, perception and communication gaps seem to be sharpening between scientists and lay public as to what is safe and how safe is safe enough. The present paper is an attempt to illustrate the causes of such perception and communication gaps and present some empirical evidence to understand the psychological foundation of fears in the lay public.     

Nicotinamide Phosphoribosyltransferase as a Key Molecule of the Aging/Senescence Process

Aging is a phenomenon underlined by complex molecular and biochemical changes that occur over time. One of the metabolites that is gaining strong research interest is nicotinamide adenine dinucleotide, NAD⁺, whose cellular level has been shown to decrease with age in various tissues of model animals and humans. Administration of NAD⁺ precursors, nicotinamide mononucleotide (NMN) and nicotinamide riboside (NR), to supplement NAD⁺ production through the NAD⁺ salvage pathway has been demonstrated to slow down aging processes in mice. Therefore, NAD⁺ is a critical metabolite now understood to mitigate age-related tissue function decline and prevent age-related diseases in aging animals. In human clinical trials, administration of NAD⁺ precursors to the elderly is being used to address systemic age-associated physiological decline. Among NAD⁺ biosynthesis pathways in mammals, the NAD⁺ salvage pathway is the dominant pathway in most of tissues, and NAMPT is the rate limiting enzyme of this pathway. However, only a few activators of NAMPT, which are supposed to increase NAD⁺, have been developed so far. In this review, we will focus on the importance of NAD⁺ and the possible application of an activator of NAMPT to promote successive aging.     

Structural characterization of 1,2-polybutadiene by 13C-n.m.r. spectroscopy: 2. Sequence distribution of 1,2-unit in hydrogenated polybutadienes

The configurational sequences of 1,2-unit in a series of hydrogenated syndiotactic 1,2-polybutadienes were determined in relation to the sequence distribution of 1,2- and 1,4-units on the basis of the ¹³C-n.m.r. signal assignment of the methyl carbons. The observed triad distributions of 1,2- and 1,4-units and configurational distributions of the 1,2-unit are in good agreement with the calculated distributions from transition probabilities. The number average sequence lengths of the 1,2-unit and the 1,2-unit in the racemic addition are 5.7 to 8.0 and 4.1 to 5.4, respectively. From the extrapolation of the plot of the number average sequence length against the crystallinity of the starting 1,2-polybutadienes, the minimum sequence length for crystallization is estimated to be 3.7 for the 1,2-unit in the racemic addition.     

Analysis of Energy Saving and Environmental Characteristics of Electric Vehicles in Regionally Disaggregated World Energy Model

This paper investigates the impact of an extensive introduction of electric vehicles (EV) and plug‐in hybrid vehicles (PHEV) into the global energy system by 2050. The significant growth of automobile ownership in emerging countries is likely to increase world oil demand and the associated carbon dioxide emissions. In order to address these energy, security, and environmental concerns, the deployment of clean energy vehicles, such as EV and PHEV, is expected to play a crucial role due to their high fuel efficiency. Consequently, we develop both a global energy system model and a world vehicle penetration model, which can explicitly analyze the impact of EV introduction into the seasonal daily electric load curve, with consideration of the specific electricity charging profile through 2050. The simulation results confirm that EV deployment contributes to energy conservation, because oil demand reduction outstrips the growth in electricity demand and the associated fuel input into the power generation mix. Concerning carbon dioxide abatement, the magnitude of the impact relies on the carbon intensity of the power generation mix. If the intensity is low enough to guarantee a carbon mitigation effect due to EV fuel saving, emissions reduction is well assured. It should be noted, however, that in regions with high carbon intensity in the power generation mix, carbon emissions per mileage of EVs is almost equivalent to that of efficient gasoline vehicles such as hybrid vehicles, and the figure for PHEV is slightly higher than for hybrid vehicles. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(4): 20–36, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22373     

Binding and Enhanced Binding between Key Immunity Proteins TRAF6 and TIFA

Human tumor necrosis factor receptor associated factor (TRAF)-interacting protein, with a forkhead-associated domain (TIFA), is a key regulator of NF-κB activation. It also plays a key role in the activation of innate immunity in response to bacterial infection, through heptose 1,7-bisphosphate (HBP); a metabolite of lipopolysaccharide (LPS). However, the mechanism of TIFA function is largely unexplored, except for the suggestion of interaction with TRAF6. Herein, we provide evidence for direct binding, albeit weak, between TIFA and the TRAF domain of TRAF6, and it is shown that the binding is enhanced for a rationally designed double mutant, TIFA S174Q/M179D. Enhanced binding was also demonstrated for endogenous full-length TRAF6. Furthermore, the structures of the TRAF domain complexes with the consensus TRAF-binding peptides from the C terminus of wild-type and S174Q/M179D mutant TIFA, showing salt-bridge formation between residues 177–181 of TIFA and the binding pocket residues of the TRAF domain, were solved. Taken together, the results provide direct evidence and a structural basis for the TIFA–TRAF6 interaction, and show how this important biological function can be modulated.     

Boronic acid‐based thin films that show saccharide‐responsive multicolor changes

A novel saccharide sensor that displays a distinct color change resembling a “traffic signal” was developed. By copolymerizing boronic acid and amine monomers on a glass plate, a boronic acid‐containing thin film was obtained. Anionic blue and yellow dyes were adsorbed on the thin film, and the film was immersed in aqueous saccharide solutions containing a cationic red dye. With increase in the saccharide concentration in the solution, the thin film changes color from green to red via yellow. The observed distinct changes in color were attributed to a stepwise release and binding of dyes. The sensitivity of the saccharide sensor was dependent on the monomer composition of the thin film and increased with increasing the boronic acid content. The pH of the saccharide solution was another key factor affecting the sensing behavior, and glucose‐responsive color changes were significantly enhanced at pH 7.8. By optimizing these conditions, significant color changes in response to glucose were achieved. Saccharide selectivity was found to be in the following order: fructose > glucose > galactose = mannose > sucrose. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42679.