Porous microspheres of methoxy poly(ethylene glycol)-b-poly(?-caprolactone-co-d,l-lactide) prepared by a melt dispersion method

Surfactant-free biodegradable porous microspheres of methoxy poly(ethylene glycol)-b-poly(?-caprolactone-co-d,l-lactide) (MPEG-b-PCLDLL) diblock copolymers were prepared by a simple melt dispersion method in water at 80 °C with magnetic stirring. Any organic solvents and surfactants can be neglected for this method. Different CL/DLL ratios in the MPEG-b-PCLDLL were investigated for preparation of the porous microspheres. It was found that microsphere sizes decreased and surface pore sizes increased as the increasing DLL ratio. The pores were well interconnected throughout the microsphere matrices for all MPEG-b-PCLDLLs. The larger pore sizes can be obtained when the PEG was blended with diblock copolymer before preparation of porous blended microspheres. Possible mechanisms for formation of the porous microspheres with and without PEG blending were also proposed.     

Preparation of regenerated silk sericin/silk fibroin blend microparticles by emulsification–diffusion method for controlled release drug delivery

This study reports drug-loaded silk sericin (SS)/silk fibroin (SF) blend microparticles being fabricated by the water-in-oil emulsion solvent diffusion of a SS/SF aqueous blend solution. Blue dextran was used as the water-soluble drug model. The influence of the SS/SF blend ratio on the characteristics and drug release behavior of the blend microparticles was investigated. The blend microparticles were analyzed by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA) and UV-vis spectroscopy. The blend microparticles were nearly spherical in shape as determined from SEM micrographs. The FTIR and TG results demonstrated that interactions between SS and SF molecules had occurred. The blend microparticles showed very high drug loading efficiency (94–98%) for all blend ratios. The in vitro drug release significantly decreased with decreasing SS blend ratio. The results demonstrated that the SS/SF blend microparticles could be used as biocompatible and biodegradable microparticles for controlled release drug delivery applications.     

Preparation of drug‐loaded microspheres of linear and star‐shaped poly(D,L‐lactide)s and their drug release behaviors

Linear (1‐arm) and star‐shaped (4‐, 6‐, and 16‐arm) poly(D,L ‐lactide)s (PDLLs) were synthesized by ring‐opening polymerization in bulk of D,L ‐lactide monomer. Hydroxyl end‐group compounds and stannous octoate were used as the initiator and catalyst, respectively. The intrinsic viscosity and glass transition temperature (T_g) of the PDLLs decreased steadily as the branch arm number increased for similar molecular weights. However, the intrinsic viscosity and T_g values of the linear PDLL were less than the star‐shaped PDLL for similar each PDLL arm lengths. Ibuprofen, a poorly water soluble model drug was entrapped in the PDLL microspheres. All drug‐loaded PDLL microspheres were prepared by the oil‐in‐water emulsion solvent evaporation method, were spherical in shape, and had a smooth surface with fine dispersibility. In vitro drug release behaviors indicated that the drug release from the microspheres with higher branch arm number was faster than from those with lower branch arm number. Moreover, the drug release from the star‐shaped PDLL microspheres was slower than that of the linear PDLL microspheres for similar PDLL arm lengths. The drug release behavior could be adjusted through both the branch arm number and arm length of PDLL. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Silk fibroin microspheres prepared by the water-in-oil emulsion solvent diffusion method for protein delivery

Silk fibroin (SF) microspheres were prepared by the simple water-in-oil emulsion solvent diffusion method without any surfactants. Aqueous SF solution and dichloromethane were used as water and oil phases, respectively. Influence of water: oil phase ratios on SF microsphere characteristics was investigated. From FTIR spectra, the resulting SF microspheres showed predominantly random coil SF conformation. SF microspheres observed from SEM images were spherical with deflated surfaces in some cases. Particle sizes of the SF microspheres were in the range 45–92 μm. Finally, bovine serum albumin (BSA) was used as a model protein for entrapment within the SF microspheres. The BSA-loaded SF microspheres were larger than unloaded SF microspheres. In vitro release tests indicate that BSA release from the SF microspheres was influenced by BSA content.     

Study on wood vinegars for use as coagulating and antifungal agents on the production of natural rubber sheets

Coagulating and antifungal properties of wood vinegars in the preparation process of Hevea brasiliensis natural rubber (NR) sheets were investigated and compared with those of formic and acetic acids. The wood vinegars produced from biomasses such as inner coconut shell, bamboo and Eucalyptus woods were evaluated. It was found that plasticity retention index, Mooney viscosity and mechanical properties of NR coagulated by wood vinegars were similar to those using acetic acid and better than using formic acid. The antifungal efficiency of coagulants determined from a fungi growth area on NR sheet surfaces was found in the following order: coconut shell wood vinegar > bamboo wood vinegar ≈ Eucalyptus wood vinegar > acetic acid ≈ formic acid. The antifungal efficiency of the wood vinegars was strongly depended upon their phenolic compound contents and confirmed through the inhibitory growth of the main fungi, Penicillium griseofulvum, on potato dextrose agar.     

Synthesis,characterization and melt spinning of a block copolymer of L-lactide and ε -caprolactone for potential use as an absorbable monofilament surgical suture

This paper describes the synthesis and characterization of a block copolymer of L-lactide (LL) and ε -caprolactone (CL) and its subsequent melt spinning into a monofilament fiber. The synthesis reaction was a two-step process. In the first step, an approximately 50:50 mol% random copolymer, P(LL-co-CL), was synthesized via bulk copolymerization of LL and CL. This first-step prepolymer then became the macroinitiator in the second-step reaction in which more LL monomer was added to form a block copolymer, PLL-b-P(LL-co-CL)-b-PLL. Both the prepolymer and block copolymer were characterized by a combination of analytical techniques comprising dilute-solution viscometry, GPC, ¹H and ¹³C NMR, DSC and TG. The block copolymer was then processed into a monofilament fiber using a small-scale melt spinning apparatus. The fiber was spun with a minimum amount of chain orientation and crystallinity so that its semi-crystalline morphology could be constructed under more controlled conditions in subsequent off-line hot-drawing and annealing steps. In this way, the fiber’s tensile properties and dimensional stability were developed, as indicated by the changes in its stress-strain curve. The final drawn and annealed fiber had a tensile strength (> 400 MPa) approaching that of a commercial PDS II suture of similar size. It is considered that this type of block copolymer has the potential to be developed further as a lower-cost alternative to the current commercial monofilament surgical sutures.     

Synthesis and characterization of poly(L‐lactide‐co‐ϵ‐caprolactone)‐b‐poly(L‐lactide) biodegradable diblock copolyesters: Effect of the block lengths on their thermal properties

Poly(L ‐lactide‐co‐ε‐caprolactone)‐b‐poly(L ‐lactide) [P(LL‐co‐CL)‐b‐PLL] diblock copolyesters were synthesized in a two‐step process with 1‐dodecanol (DDC) and stannous octoate as the initiating system. In the first‐step reaction, a 50:50 mol % amorphous poly(L ‐lactide‐co‐ε‐caprolactone) [P(LL‐co‐CL)] copolyester was synthesized via the bulk copolymerization of L ‐lactide and ε‐caprolactone, which was followed by the polymerization of the PLL crystalline block at the end chain in the second‐step reaction. The yielded copolyesters were characterized with dilute‐solution viscometry, gel permeation chromatography, ¹H‐ and ¹³C‐NMR, and differential scanning calorimetry methods. The molecular weights of the P(LL‐co‐CL) copolyesters from the first‐step reaction were controlled by the DDC concentrations, whereas in the second‐step reaction, the molecular weights of the P(LL‐co‐CL)‐b‐PLL diblock copolyesters depended on the starting P(LL‐co‐CL) copolyester molecular weights and L ‐lactide/prepolymer molar ratios. The starting P(LL‐co‐CL) copolyester molecular weights and PLL block lengths seemed to be the main factors affecting specific thermal properties, including the melting temperature (T_m), heat of melting (ΔH_m), crystallizing temperature (T_c), and heat of crystallizing (ΔH_c), of the final P(LL‐co‐CL)‐b‐PLL diblock copolyester products. T_m, ΔH_m, T_c, and ΔH_c increased when the PLL block lengths increased. However, these thermal properties of the diblock copolyesters also decreased when the P(LL‐co‐CL) block lengths increased. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Biodegradable nanoparticles of methoxy poly(ethylene glycol)-b-poly( d, l-lactide)/methoxy poly(ethylene glycol)- b-poly(ϵ-caprolactone) blends for drug delivery

The effects of blend weight ratio and polyester block length of methoxy poly(ethylene glycol)-b-poly( d, l-lactide) (MPEG- b-PDLL)/methoxy poly(ethylene glycol)- b-poly(ϵ-caprolactone) (MPEG- b-PCL) blends on nanoparticle characteristics and drug release behaviors were evaluated. The blend nanoparticles were prepared by nanoprecipitation method for controlled release of a poorly water-soluble model drug, indomethacin. The drug-loaded nanoparticles were nearly spherical in shape. The particle size and drug loading efficiency slightly decreased with increasing MPEG- b-PCL blend weight ratio. Two distinct thermal decomposition steps from thermogravimetric analysis suggested different blend weight ratios. Thermal transition changes from differential scanning calorimetry revealed miscible blending between MPEG- b-PDLL and MPEG- b-PCL in an amorphous phase. An in vitro drug release study demonstrated that the drug release behaviors depended upon the PDLL block length and the blend weight ratios but not on PCL block length.