Reactive Compatibilizer Precursors for LDPE/PA6 Blends, 4

Summary: The effectiveness of some thermoplastic elastomers grafted with maleic anhydride (MA) or with glycidyl methacrylate (GMA) as compatibilizer precursors (CPs) for blends of low density polyethylene (LDPE) with polyamide‐6 (PA) has been studied. The CPs were produced by grafting different amounts of MA or GMA onto a styrene‐block‐(ethylene‐co‐1‐butene)‐block‐styrene copolymer (SEBS) (KRATON G 1652), either in the melt or in solution. A commercially available SEBS‐g‐MA copolymer with 1.7 wt.‐% MA (KRATON FG 1901X) was also used. The effect of the MA concentration and of other characteristics of the SEBS‐g‐MA CPs was also studied. The specific interactions between the CPs and the blends components were investigated through characterizations of the binary LDPE/CP and PA/CP blends, in the whole composition range. It was demonstrated that the SEBS‐g‐GMA copolymers display poor compatibilizing effectiveness due to cross‐linking resulting from reactions of the epoxy rings of these CPs with both the amine and the carboxyl end groups of PA. On the contrary, the compatibilizing efficiency of the MA‐grafted elastomers, as revealed by the thermal properties and the morphology of the compatibilized blends, was shown to be excellent. The results of this study confirm that the anhydride functional groups possess considerably higher efficiency, for the reactive compatibilization of LDPE/PA blends, than those of the ethylene‐acrylic acid and ethylene‐glycidyl methacrylate copolymers investigated in previous works.

SEM micrograph of the 75/25 LD08/PA blend (with 2 phr SEBSMA1).     

Dependence of Fluid Catalytic Cracking Unit Performance on H-Oil Severity,Catalyst Activity,and Coke Selectivity

The effect of the quality of ebullated bed vacuum residue H-Oil hydrocracking gas oils cracked in a commercial fluid catalytic cracking unit (FCCU) on its performance was studied. Six different catalysts were employed in this study. Four catalysts were tested in a commercial FCCU, and two in a laboratory FCCU. An increase of the H-Oil hydrocracker reaction temperature was associated with a decrease in the K_W factor of the H-Oil gas oils. The diminished K_W factor of H-Oil gas oils resulted in lower FCCU conversion and higher regenerator temperatures. The FCC conversion at maximum gasoline yield is best predicted by the feed K_W factor. The higher-activity, higher-Δcoke catalyst is unfavorable for FCCU performance because the excessive regenerator temperature excursions require reduction of the throughput.     

Manufacturing of patterned ZnO films with application for photoinitiated decolorization of malachite green in aqueous solutions

Patterned thin films, ZnO, are successfully prepared on glass substrates by the sol-gel method using dip-coating technique. The films, formed of ZnO nanocrystallites with hexagonal crystal structure, are characterized by means of scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction. The as obtained ZnO films are studied with respect to photo-initiated bleaching of malachite green in aqueous solutions. The bleaching process is investigated at various initial concentrations of malachite green in the aqueous solutions by using ZnO films of different thicknesses. The obtained results are promising for the development of ZnO photocatalysts by the sol-gel method.     

Aetiology and Pathogenesis of Cutaneous Melanoma: Current Concepts and Advances

Melanoma develops from malignant transformations of the pigment-producing melanocytes. If located in the basal layer of the skin epidermis, melanoma is referred to as cutaneous, which is more frequent. However, as melanocytes are be found in the eyes, ears, gastrointestinal tract, genitalia, urinary system, and meninges, cases of mucosal melanoma or other types (e.g., ocular) may occur. The incidence and morbidity of cutaneous melanoma (cM) are constantly increasing worldwide. Australia and New Zealand are world leaders in this regard with a morbidity rate of 54/100,000 and a mortality rate of 5.6/100,000 for 2015. The aim of this review is to consolidate and present the data related to the aetiology and pathogenesis of cutaneous melanoma, thus rendering them easier to understand. In this article we will discuss these problems and the possible impacts on treatment for this disease.     

Classification of radar signatures by autoregressive model fittingand cluster analysis

Ninety radar signatures were digitally recorded during the probing of ten different land and marine objects with a pulsed coherent Doppler radar. Their spectra were evaluated on the basis of the Marple algorithm for autoregressive model fitting. An attempt at classification is made. The method consists in representing the radar signatures as points in four-dimensional space and identifying the obtained clusters of four-dimensional points with the observed objects. The cluster analysis is carried out assuming that the classification parameters have different clustering lengths     

Carbon nanotubes based optical immunodetection of Staphylococcal Enterotoxin B (SEB) in food

Staphylococcal enterotoxins (SEs) are a major cause of food-borne diseases, traditionally SEs assayed immunologically with ELISA. Carbon nanotubes' (CNT) unique mechanical and electronic properties combined with a large specific surface area make them attractive for biosensing. To investigate whether CNT could improve the sensitivity of ELISA assays, we developed an optical CNT immunosensor for the detection of Staphylococcal Enterotoxin B (SEB) in food. Anti-SEB antibodies were immobilized onto a CNT surface through electrostatic adsorption and then the antibody-nanotube mixture was bound onto a polycarbonate film. SEB was then detected by a "sandwich-type" ELISA assay on the polycarbonate film. The use of CNT increased the sensitivity of the immunosensor by at least 6-fold, lowering the detection limit of SEB. The CNT immunosensor was also able to detect SEB various foods, suggesting the utility of CNT for this and other optical-based immunological detection methods.     

Low-cost plastic plasmonic substrates for operation in aqueous environments

We report a novel design of a multilayer stack to attain surface-plasmon-coupled emission (SPCE) enhancements in liquid medium. Variation in thickness of the multilayer affects the position and depth of resonance plasmon dips. Numerical investigation resulted in an optimal stack configuration that supports long-range surface plasmons. SPCE substrates were prepared on plain BK7 glass and Teflon-AF coated polycarbonate (PC-T) substrates by modifying their surface functionalities using plasma etching. The changes in refractive indices due to the presence of the fluoropolymer layer help reduce the SPCE exit angle from α = 75° (plain BK7) to α = 60° (PC-T) in water without requiring specialized optics.     

Signal enhancement of surface plasmon-coupled directional emission by a conical mirror

A simple strategy for increasing the collection efficiency of surface plasmon-coupled emission (SPCE) is demonstrated. SPCE is a near-field phenomenon occurring when excited fluorophores are in close proximity to a subwavelength metal film. The energy of the fluorophores induces surface plasmons that radiate the coupled energy at highly specific angles. In an attempt to maximize the collected emission, a conical mirror was placed around the coupling prism. The result was a nearly 500 fold enhancement over the free space signal as detected from a single point from a poly(vinyl alcohol) layer doped with ruthenium. Coupling this large enhancement with LED excitation could lead to the development of inexpensive, handheld fluorescent devices with high sensitivity.     

Obtaining of Ashless Additives for Diesel Fuel Impoving the Lubricating,Anticorrosion and Protection Properties

Abstract

The production of “ultra pure” diesel fuels is connected with the deterioration of their certain performance characteristics. The lubricating properties of ultra pure diesel fuels are poor; their relative stability worsens; they tend to be corrosion-aggressive toward metal surfaces; and their electrophysical properties sharply deteriorate to increase the possibilities for accumulation of static-electric charge by transportation and feeding into vehicles (Tasheva, Petkov, and Ivanov, 2003 Tasheva, J., Petkov, P. and Ivanov, Sl. 2003. Contemporary trends in connection with the reduction of sulfur oxides at burning of fuels. Annual of University Prof. Dr. Assen Zlatarov, Bourgas, Bulgaria, XXXII(1): 150–155.  [Google Scholar]; 2004 Tasheva, J., Petkov, P. and Ivanov, Sl. 2004. Reduction of the contents of sulphur-containing organic compounds, arene hydrocarbons and resinous products in diesel fuels by applying extraction with selective solvents. Oxidation Communications, 27(1): 48–57.  [Google Scholar]).

These negative properties of the ultra pure diesel fuel are usually overcome by adding special substances to improve their lubricating properties, electric conductivity, and oxidation stability and to eliminate their corrosion aggressiveness.