A new voltage control equipment using fuzzy inference

Power system control equipment needs higher sensitivity and operational reliability. Advanced voltage control equipment is needed for reducing the frequency of tap changes and improving the characteristics (the relationship between the actual voltage and reference voltage) of the voltage to meet today's power system requirements. However, these objectives are in a trade-off relationship. Studies of voltage control derived from a knowledge base suitable for electric power systems can satisfy these objectives using fuzzy inference. Compared with corresponding conventional equipment, the new equipment improved the deviation of 30 min average voltage of 30 percent. This paper describes the design concept of new voltage control equipment using fuzzy inference. In addition, field test results are described along with rules of fuzzy inference, membership functions, and the deviation of 30 min average voltage through detailed simulation.     

Simulation with an improved plasma model utilized to design a new structure of microwave plasma discharge for chemical vapor deposition of diamond crystals

A new structure of microwave plasma for chemical vapor deposition of diamond crystal is proposed. The structure is designed numerically, for which an improved model given in our previous work [H. Yamada et al., J. Appl. Phys. 101 (2007), art. no. 063302.] is utilized. The experimental observations and numerical predictions agree well with each other. It is demonstrated experimentally that the proposed structure can achieve a growth rate larger than 50 μm/h over an area 1 in. in diameter.     

Formation of monodispersed Ta2O5 powders

The Ta₂O₅ powders synthesized by the hydrolysis of tantalum pentaethoxide, Ta(OC₂H₅)₅ in alcoholic solution were monodispersed fine oxide particles, which were a uniform, spherical shape, non-agglomerate, and had a narrow size distribution. They grew to 1.2m after ageing for 1 h after hydrolysis. Powder X-ray diffraction and differential thermal analysisthermogravimetric analysis showed the particles were amorphous and hydrated. These particles lost the water at 290° C and gave well-crystalline Ta₂O at 740° C. Throughout these thermal processes, the particle morphology was kept almost the same.     

Effect of perchloric acid on the molecular weight and yield of poly-THF

Polytetramethylene glycol (molecular weight range 1000–8000) was prepared by the polymerization of tetrahydrofuran (THF) using a binary catalyst system of fuming sulfuric acid and perchloric acid. When 28% fuming sulfuric acid alone was used as the catalyst, the average molecular weight of polymer was low, the maximum value being 1000–1100. By the combination of fuming sulfuric acid with a small amount of perchloric acid, the average molecular weight of the polymer was increased to about 8000. Furthermore, the molecular weight was readily controlled in the range of 1000 to 8000 by varying the amount of the binary catalyst.     

Synthesis of Super-Microporous Aluminosilicate Having Excellent Water Vapor Adsorption Property as an Adsorbent for an Adsorption Heat-Pump

The synthesis of super-microporous aluminosilicate with a pore diameter of 14.6 Å has been achieved, by means of synthesis under specified conditions with a skeletal material comprising TMOS and a small quantity of sodium aluminate, and a conventional alkyl-trimethylammonium halide (C₁₀TMABr) as a template. This super-microporous aluminosilicate has an adsorption capacity of 0.2 ml/g at a relative water vapor pressure of 0.2, and thus is promising as an adsorbent for an adsorption heat-pump.     

Shear-rate dependence of first normal stress difference of poly(isoprene-b-styrene) in solution near the order-disorder transition temperature

Viscoelastic properties of poly(isoprene-b-styrene) in dioctylphthalate under steady shear flow were measured near the order—disorder transition temperature. In ordered states, first normal stress difference N₁ is proportional to shear rate at low region, but becomes proportional to at the high region, similar to the N₁ behaviour of polymer blends undergoing shear-induced homogenization. Because the existence of microdomains was confirmed at the high region by the flow birefringence method, it is concluded that the above N₁ behaviour is not caused by shear-induced homogenization, but is probably caused by the shear-induced alignment of the microdomain structure.     

Photo-regulated metal coordination of azobenzene polymer having sterically controlled ion binding sites

Summary 2,2-Dimethylazobenzenes having metal chelating ligands at meta-positions were synthesized, and the interaction with metal ions were estimated for syn- and anti-ligands on thermal isomerization. The azobenzenes with the metal-interaction were transformed to vinyl azobenzenes and copolymerized with styrene. The metal extracting ability was found in photo-isomerized polymer having syn-bis(iminodiacetic acid) groups; the selectivity was high for Cu(II) ion.     

Heat regulating strategy in numerical control end milling for hard metal machining

The trend in die/mold manufacturing at present is towards the hard machining at high speed to replace the electron discharge machining. Failure forms of the A1TiN-coated micro-grain carbide endmill when used for the machining of/IS SKD61 (HRC 53), a widely used material in die/mold manufacturing, are investigated. The endmill shows a characteristic that tool life decreases greatly due to the chipping when overload occurs or the rapid increase of wear when over-heat accumulation in cutting edges. As a consequence of the investigation, a strategy to regulate heat generation in the end milling process is proposed. This is accomplished by controlling the cutting arc length, i.e. the length of each flute engaging workpiece in a cutting cycle. Case studies on the slot end milling and comer rounding are conducted. The results show that the proposed strategy suggests the optimal tool path as well as the optimal pitch between successive tool paths under the cutting time criterion.     

Identification of nonminimum phase FIR systems via fourth-order cumulants and genetic algorithm

In this paper, the problem of estimating the parameters of an FIR system from only the fourth-order cumulants of the noisy system output is considered. The FIR system is driven by a symmetric, independent, and identically distributed (i.i.d) non-Gaussian sequence. We propose a new formula called Weighted Overdetermined C(q, k) (WOC(q, k)) by extending the conventional C(q, k) formula. The optimal selection of the weights in WOC(q, k) is performed by using the Genetic Algorithm (GA) optimization method which minimizes a nonlinear error function based on the fourth-order cumulants alone. Simulations are provided to reveal the effectiveness and the superiority of this novel technique over the C(q, k) and other existing techniques.