Nitric oxide synergistically enhances DNA strand breakage induced by polyhydroxyaromatic compounds, but inhibits that induced by the Fenton reaction

This paper deals with the muscle force of the cervical spine in patients with cervical syndrome compared to the muscle activity in non-patients. It has thus been observed that both the flexors' and the extensors' force of the cervical spine is much greater in non-patients (the flexors' P < 0.01 and the extensors' P < 0.01). The precise measurements having been carried out by a dynamometer. The groups being tested comprised 50 persons each, 25 men and 25 women. The average age of the patients group was 43.1 years, namely between 21 and 57 years, while that of the non-patients group was 42.3 years, between 24 and 56 years. As regards the professional engagement of both groups and, accordingly, the strain on the cervical spine and the corresponding musculature, they were approximately the same.     

Thermogravimetric Study of the M-Co-O System: I, M = Ta and Nb at 1200°C

Phase equilibria in the Ta-Co-O and Nb-Co-O systems have been studied at 1200°C at oxygen partial pressures from 10^−0.68 to 10^−13.50 atm for the former and from 10^−0.68 to 10^−13.30 atm for the latter. In both systems, M₂CoO₆ and M₂Co₄O₉ are stable ternary compounds under the experimental conditions, and a new phase, Nb₅Co₂O₁₄, has been identified. The Ta-Co-O system is simple, whereas the Nb-Co-O system is somewhat more complicated because of the extra phase. The lattice constants of the ternary compounds have been determined and compared with previous values. The standard Gibbs energies of reactions have been determined using oxygen partial pressures in equilibrium with three solid phases.     

A digital automatic current control system based on an optimumassumed model

In this paper, a new ACR (automatic current regulator) scheme is introduced for brushless DC motors. It consists of a model closely resembling the motor and PWM inverter, an assumed rising pattern of the current, and a parameter estimation. Using the control scheme, the mean value of the motor current is kept at the reference current, and the transient current of the motor is kept equal to the rising pattern. For the disturbance, because of DC-line voltage change, the proportional path from the error to the duty cycle of the PWM signal stabilizes the ACR. This ACR scheme can be realized with a microcomputer     

The T cell-directed CC chemokine TARC is a highly specific biological ligand for CC chemokine receptor 4

Thymus and activation-regulated chemokine (TARC) is a recently identified CC chemokine that is expressed constitutively in thymus and transiently in stimulated peripheral blood mononuclear cells. TARC functions as a selective chemoattractant for T cells that express a class of receptors binding TARC with high affinity and specificity. To identify the receptor for TARC, we produced TARC as a fusion protein with secreted alkaline phosphatase (SEAP) and used it for specific binding. By stably transfecting five orphan receptors and five known CC chemokine receptors (CCR1 to -5) into K562 cells, we found that TARC-SEAP bound selectively to cells expressing CCR4. TARC-SEAP also bound to K562 cells stably expressing CCR4 with a high affinity (Kd = 0.5 nM). Only TARC and not five other CC chemokines (MCP-1 (monocyte chemoattractant protein-1), RANTES (regulated upon activation, normal T cells expressed and secreted), MIP-1alpha (macrophage inflammatory protein-1alpha), MIP-1beta, and LARC (liver and activation-regulated chemokine)) competed with TARC-SEAP for binding to CCR4. TARC but not RANTES or MIP-1alpha induced migration and calcium mobilization in 293/EBNA-1 cells stably expressing CCR4. K562 cells stably expressing CCR4 also responded to TARC in a calcium mobilization assay. Northern blot analysis revealed that CCR4 mRNA was expressed strongly in human T cell lines and peripheral blood T cells but not in B cells, natural killer cells, monocytes, or granulocytes. Taken together, TARC is a specific functional ligand for CCR4, and CCR4 is the specific receptor for TARC selectively expressed on T cells.     

Ten-user truly asynchronous gigabit OCDMA transmission experiment with a 511-chip SSFBG en/decoder

A ten-user truly asynchronous gigabit coherent-optical-code-division-multiple-access (OCDMA) transmission was experimentally demonstrated without using any timing coordination. The enabling technologies are a record-length 511-chip superstructured-fiber-Bragg-grating (SSFBG) en/decoder and a supercontinuum (SC)-based optical-thresholding technique to significantly suppress the signal interference beat noise as well as the multiple-access-interference (MAI) noise.     

Preparation of heterotactic-rich poly(methyl methacrylate) with narrow molecular weight distribution bytert-butyllithium/bis(2,6-di-tert-butylphenoxy)methylaluminum

Summary Polymerization of methyl methacrylate (MMA) withtert-butyllithium (t-C₄H₉Li) in toluene in the presence of aluminum alkoxides such as ethoxide,tert-butoxide and 2,6-di-tert-butylphenoxide, were examined at various Al/Li ratios. In the cases of ethoxide andtert-butoxide, predominantly isotactic polymers with broad molecular weight distribution were obtained. Combinations oft-C₄H₉Li and bis(2,6-ditert-butylphenoxy)methylaluminum [MeAl(ODBP)₂] were found to be an efficient initiating system for heterotactic polymerization of MMA, which gives PMMA rich in heterotactic triads up to 68% with narrow molecular weight distribution (Mw/Mn=1.09–1.17). End group analysis by¹H NMR indicated thatt-C₄H₉Li initiates the polymerization and MeAl(ODBP)₂ works as a stereospecific modifier. From stereosequence analysis of the heterotactic PMMA by¹³C NMR, it was found that the calculated pentad fractions from the first-order Markovian statistics (Pm/r=0.742, Pr/m=0.627) fitted the observed ones better than those from Bernoullian statistics. The glass transition temperature of the heterotactic PMMA was 13°C lower than that of syndiotactic PMMA, and the intrinsic viscosity in tetrahydrofuran was close to that of isotactic PMMA with a similar molecular weight but higher than that of syndiotactic PMMA.     

Synthesis of Sn-Incorporated Folded Sheets Mesoporous Materials (Sn-FSM-16)

Sn-incorporated folded sheets mesoporous materials (Sn-FSM-16) with various contents of Sn were synthesized by using a mixture of water glass, SnCl₄ and NaOH as starting materials. Hexadecyltrimethyl-ammonium chloride (surfactant) was used to intercalate into the layered silicate. The reaction process was followed by measurements of XRD patterns of intermediates. The Sn-FSM-16 was formed via the following mechanism: (1) layered silicates such as - - and -Na₂Si₂O₅ were formed as intermediates by the calcination of the mixture of the starting materials; (2) the surfactant was intercalated into the layered silicates; (3) the surfactant-silicate complex with hexagonal structure was obtained as a precursor of Sn-FSM-16; (4) the precursor was calcined to decompose the surfactant in the interlayer and was changed to Sn-FSM-16. The structural aspect of Sn in Sn-FSM-16 was studied by XPS profiles of Sn 3d _5/2 and Si_2p, ²⁹ Si MAS NMR and FTIR. The content of Sn in Sn-FSM increased with increasing concentrations of both Sn and NaOH in the starting materials. The surface area of Sn-FSM-16 decreased with an increase of Sn content in Sn-FSM (1160–620 m²/g).     

Poly(pyridine-2,5-diyl)–CuCl2 catalyst for synthesis of dimethyl carbonate by oxidative carbonylation of methanol: catalytic activity and corrosion influence

A -conjugated polymer, poly(pyridine-2,5-diyl) (PPy) was investigated as a support for CuCl₂ in the synthesis of dimethyl carbonate by oxidative carbonylation of methanol. The PPy–CuCl₂ adduct had high catalytic activity which was comparable to that of the homogeneous CuCl₂ catalyst. The adduct caused corrosion of stainless-steel vessels only to minor extent, compared with the homogeneous CuCl₂ catalyst. This PPy–CuCl₂ catalyst was easily recycled by filtration and showed a similar catalytic activity in the third time use. The presence of the -conjugated system in PPy, through which electrons can move, may bring about the high catalytic activity for the oxidative carbonylation of methanol, which involves Cu(II)/Cu(I) redox processes.     

Carbon fiber from natural biopolymer Bombyx mori silk fibroin with iodine treatment

Carbon fibers were prepared from silk fibers after an iodine treatment and the carbon yield, fiber morphology, structure and mechanical properties were investigated. A single or multi-step carbonization process was used for the preparation. In the single step process, silk fibroin (SF) fibers were heated from 25 to 800 °C with a heating rate of 5 °C min⁻¹ under Ar atmosphere. However, the carbon fiber obtained was partially melted and was too fragile to handle. For better performance, SF fibers were treated with iodine vapor at 100 °C for 12 h and untreated and iodinated SF fibers were heated from 25 to 800 °C by a multi-step carbonization process, which was defined based on the optimum thermal degradation rate of silk. In this multi-step process, the carbon fibers obtained from iodinated SF were structurally intact and stable in appearance, and the carbon yield achieved was ca. 36 wt.%, much higher than the value for untreated SF. X-ray diffraction, Raman spectroscopy and transmission electron microscopic observation revealed that the obtained carbon fibers from both untreated and iodinated SFs had a basically amorphous structure. The strength of carbon fibers prepared from iodinated SF using the multi-step carbonization was considerably increased compared to that of untreated SF. According to viscoelastic measurement, by heating above 280 °C the iodine introduced intermolecular cross-linking of the SF, and its melt flow was inhibited which produced a higher yield and better performance of the carbon fiber.     

Fractionation and enrichment of CLA isomers by selective esterification with Candida rugosa lipase

A commercial product of CLA contains almost equal amounts of cis-9,trans-11 (c9,t11)-CLA and trans-10,cis-12 (t10,c12)-CLA. We attempted to enrich the two isomers by a two-step selective esterification using Candida rugosa lipase that acted on c9,t11-CLA more strongly than on t10,c12-CLA. An FFA mixture containing CLA isomers was esterified with an equimolar amount of lauryl alcohol in a mixture of 20% water and the lipase. When the esterification of total FA reached 50%, two isomers were fractionated in a good yield: t10,c12-CLA was enriched in FFA, and c9,t11-CLA was recovered in lauryl esters. The FFA were esterified again to enrich t10,c12-CLA. At 27.3% esterification of total FA, the t10,c12-CLA content in FFA increased to 64.8 wt% with 89.3% recovery: The ratio of the content of t10,c12-CLA to that of two isomers was 95.9%. Lauryl esters obtained by the single esterification were employed for enrichment of c9,t11-CLA. After the esters were hydrolyzed, the resulting FFA were esterified again with lauryl alcohol. At 62.0% esterification of total FA, the c9,t11-CLA content in lauryl esters increased to 73.3 wt% with 79.4% recovery: The ratio of the content of c9,t11-CLA to that of two isomers was 95.6%. In a 600-g-scale purification, molecular distillation was effective in separating the reaction mixture into lauryl alcohol, FFA, and lauryl ester fractions.