Effective lightning protection schemes for distribution line

The causes of lightning outage are subdivided into direct lightning strokes and induced lightning strokes, which are identified by the characteristics of the lightning overvoltage. In the past, lightning protection devices were directed mainly toward the latter, and attention has been focused on the installation of lightning protection devices, ground wires, and reinforcement of insulators. However, lightning outages continue to occur. Thus it is extremely important to clarify the fault characteristics of lightning surges and to study the effectiveness of various lightning protection devices by considering both direct lightning stroke and induced lightning stroke in order to prevent lightning outage in the future. In this research, the electromagnetic transients program (EMTP) has been applied to the direct lightning stroke, and the induced lightning outage analysis program for multiple conductor systems has been applied to the induced lightning stroke to study the effectiveness of lightning protection devices provided by combination of various lightning protection devices. The most effective lightning protection schemes are analyzed and evaluated based on verification tests on the full scale models as well as economic considerations.     

10 Gbit/s optical BPSK homodyne detection experiment with solitaryDFB laser diodes

Solitary DFB laser diodes with 174 kHz beat linewidth are applied to a 10 Gbit/s optical BPSK homodyne detection system for the first time: a sensitivity of -38.9 dBm was achieved. A three-electrode laser forms the local oscillator and is modulated with a partial push-pull scheme to improve its frequency response     

Prediction of minimum fluidization velocity for vibrated fluidized bed

The prediction of minimum fluidization velocity for vibrated fluidized bed was performed. The Geldart group A and C particles were used as the fluidizing particles. The method based on Ergun equation was used to predict the minimum fluidization velocity. The calculated results were compared with the experimental data.The calculated results of minimum fluidization velocity are in good agreement with experimental data for Geldart group A particles. For group C particles, the difference between the calculated results and experimental data is large because of the formation of agglomerates. In this case, the determination of agglomerate diameter is considered to be necessary to predict the minimum fluidization velocity.     

THIRD-ORDER ASYMPTOTIC PROPERTIES OF ESTIMATORS IN GAUSSIAN ARMA PROCESSES WITH UNKNOWN MEAN

Abstract. This paper deals with the third-order asymptotic theory for Gaussian autoregressive moving-average (ARMA) processes with unknown mean μ. We are interested in the estimation of ρ = ( α₁…, α_p, β₁…, β_q ), where α ₁…, α_ρ and β ₁…, β_q are the coefficients of the autoregressive part and the moving-average part, respectively. First, we investigate the third-order asymptotic optimality of the bias adjusted maximum likelihood estimator (MLE) of ρ in the presence of the nuisance parameters μ and ² (innovation variance). Next, for a Gaussian AR(1μ μ, ²), we propose a mean corrected estimator α_c1c2 of the autoregressive coefficient. We make a comparison between the bias adjusted estimator α_c1c2* and the bias adjusted MLE, in terms of their probabilities of concentration around the true value, or equivalently, in terms of their mean squared errors. Finally some numerical studies are provided in order to verify the third-order asymptotic theory.     

Development of flexible displays using back‐channel‐etched In–Sn–Zn–O thin‐film transistors and air‐stable inverted organic light‐emitting diodes

We developed flexible displays using back‐channel‐etched In–Sn–Zn–O (ITZO) thin‐film transistors (TFTs) and air‐stable inverted organic light‐emitting diodes (iOLEDs). The TFTs fabricated on a polyimide film exhibited high mobility (32.9 cm²/Vs) and stability by utilization of a solution‐processed organic passivation layer. ITZO was also used as an electron injection layer (EIL) in the iOLEDs instead of conventional air‐sensitive materials. The iOLED with ITZO as an EIL exhibited higher efficiency and a lower driving voltage than that of conventional iOLEDs. Our approach of the simultaneous formation of ITZO film as both of a channel layer in TFTs and of an EIL in iOLEDs offers simple fabrication process.     

Partially biobased polyamphiphile-bearing reactive epoxy groups in the side chains and its application to the hydrogel

Partially biobased polyamphiphile-bearing reactive epoxy groups in the side chains were obtained in 62–78 % yields by a radical copolymerization of limonene oxide (LO) and PEG methylacrylate (PEGA) with different feed ratios. Degree of LO incorporation into the copolymer was determined as 12–23 % by ¹H NMR spectroscopic analysis. The copolymer having LO unit:PEGA unit = 19:81 formed polymer associates in water, particle diameter of which was ranged mainly from 4 to 66 nm and hydrodynamic mean diameter was 12.3 nm. Its critical micelle concentration was determined as 0.53 g/L by fluorescence spectroscopic analysis. A cross-linking reaction of the epoxy groups in the side chains was conducted with 3.97 mol% (to the epoxy group) of branched poly(ethylene imine) as a cross-linker to give the corresponding hydrogel in 56 % yield. The hydrogel can absorb water as much as 13 times its own mass.     

ASYMPTOTIC EFFICIENCY OF THE SAMPLE COVARIANCES IN A GAUSSIAN STATIONARY PROCESS

Abstract. This paper deals with the asymptotic efficiency of the sample autocovariances of a Gaussian stationary process. The asymptotic variance of the sample autocovariances and the Cramer–Rao bound are expressed as the integrals of the spectral density and its derivative. We say that the sample autocovariances are asymptotically efficient if the asymptotic variance and the Cramer–Rao bound are identical. In terms of the spectral density we give a necessary and sufficient condition that they are asymptotically efficient. This condition is easy to check for various spectra.     

Development of coincidence transmission electron microscope. III. Incorporation with gamma-type imaging energy filter

We have developed a new analytical transmission electron microscope (TEM), called coincidence TEM, which, in principle, enables observation of elemental mapping images at a high signal-to-noise ratio. We have previously reported the successful observation of an elemental mapping image of a specimen, but over a very long period of time (168 h). To solve this inefficiency, we installed a gamma-type imaging energy filter in the coincidence TEM to remove the no-loss electrons, which are mainly transmitted electrons. This has enabled the intensity of the background signals in the coincidence measurement to be markedly reduced. The coincidence TEM with a gamma-type imaging energy filter allows the coincidence image to be observed in 3 h, thus, the measurement time is shortened by two orders of magnitude. Moreover, the use of a silicon drift detector (SDD) will shorten the measurement time.