Analysis of Cerebrospinal Fluid Extracellular Vesicles by Proximity Extension Assay: A Comparative Study of Four Isolation Kits

There is a lack of reliable biomarkers for disorders of the central nervous system (CNS), and diagnostics still heavily rely on symptoms that are both subjective and difficult to quantify. The cerebrospinal fluid (CSF) is a promising source of biomarkers due to its close connection to the CNS. Extracellular vesicles are actively secreted by cells, and proteomic analysis of CSF extracellular vesicles (EVs) and their molecular composition likely reflects changes in the CNS to a higher extent compared with total CSF, especially in the case of neuroinflammation, which could increase blood–brain barrier permeability and cause an influx of plasma proteins into the CSF. We used proximity extension assay for proteomic analysis due to its high sensitivity. We believe that this methodology could be useful for de novo biomarker discovery for several CNS diseases. We compared four commercially available kits for EV isolation: MagCapture and ExoIntact (based on magnetic beads), EVSecond L70 (size-exclusion chromatography), and exoEasy (membrane affinity). The isolated EVs were characterized by nanoparticle tracking analysis, ELISA (CD63, CD81 and albumin), and proximity extension assay (PEA) using two different panels, each consisting of 92 markers. The exoEasy samples did not pass the built-in quality controls and were excluded from downstream analysis. The number of detectable proteins in the ExoIntact samples was considerably higher (~150% for the cardiovascular III panel and ~320% for the cell regulation panel) compared with other groups. ExoIntact also showed the highest intersample correlation with an average Pearson’s correlation coefficient of 0.991 compared with 0.985 and 0.927 for MagCapture and EVSecond, respectively. The median coefficient of variation was 5%, 8%, and 22% for ExoIntact, MagCapture, and EVSecond, respectively. Comparing total CSF and ExoIntact samples revealed 70 differentially expressed proteins in the cardiovascular III panel and 17 in the cell regulation panel. To our knowledge, this is the first time that CSF EVs were analyzed by PEA. In conclusion, analysis of CSF EVs by PEA is feasible, and different isolation kits give distinct results, with ExoIntact showing the highest number of identified proteins with the lowest variability.     

Carbonization of coals into anisotropic cokes: 7. Copreheat-treatment under short contact-time conditions at high temperature

The copreheat-treatment of non-fusible and slightly fusible coals with A240 and hydrogenated A240 under high temperature-short contact-time conditions around 500 °C has been examined in an attempt to produce a formed coke with better anisotropic development. These conditions shortened the copreheat-treatment time and provided better anisotropic development in the resultant coke after carbonization. Effectiveness of short contact-time has been discussed in terms of the extent of depolymerization of coal molecules suitable for anisotropic development, this being related to coal liquefaction under similar conditions.     

Catalytic decomposition of HCFC22 (CHClF2)

The catalytic decomposition of CHClF₂ was studied over various acidic metal oxides in a fixed-bed reactor. The Cr₂O₃ZrO₂ exhibited the highest activity. The presence of water vapor in the reaction system suppresses the transformation of oxides to fluorides, progresses the formation of CO₂, and it improves the catalysts life.     

Serum N-terminal osteocalcin is a good indicator for estimating responders to hormone replacement therapy in postmenopausal women

To estimate the response to hormone replacement therapy (HRT) by bone metabolic markers, 36 patients with postmenopausal osteoporosis or osteopenia were studied to assess the correlation between percent baseline changes in lumbar bone mineral density (BMD) after 12 months and those in various bone metabolic markers after 3, 6, and 12 months of HRT. All the patients were treated with 0.625 mg of conjugated estrogen and 2.5 mg of medroxyprogesterone per day and continued for 12 months. BMD was significantly increased up to 4.19 +/- 0.87% after 6 months and 4.93 +/- 1.27% after 12 months of HRT (p = 0.0001 by analysis of variance). In accordance with this, changes in the levels of osteocalcin (p = 0.041), alkaline phosphatase (p = 0.0001), N-terminal osteocalcin (p = 0.0001), urinary excretion of pyridinoline/Cr (p = 0.0001), and deoxypyridinoline/Cr (p = 0.0001) were significantly decreased, respectively. Among these bone metabolic markers, only the change in the serum N-terminal osteocalcin at 3 months (r = 0.557, p = 0.0022), at 6 months (r = 0.470, p = 0.0184), and at 12 months (r = 0.545, p = 0.0061) significantly correlated with the change in BMD 12 months after HRT. The elution profiles of immunoreactive osteocalcin-related molecules in serum fractionated by reverse-phase high performance liquid chromatography revealed that the N-terminal fragment as well as the intact osteocalcin molecule decreased after 3 months of HRT. These results demonstrate that N-terminal osteocalcin is a suitable predictor for estimating good responders to HRT in postmenopausal women.     

Electrical properties of N2O/NH3 plasma grownoxynitride on strained-Si

Growth of ultrathin (<100 Å) oxynitride on strained-Si using microwave N₂O and NH₃ plasma is reported. X-ray photoelectron spectroscopy (XPS) results indicate a nitrogen-rich layer at the strained-Si/SiO₂ interface. The electrical properties of oxynitrides have been characterized using a metal-insulator-semiconductor (MIS) structure. A moderately low value of insulator charge density (6.1×10¹⁰ cm^-2) has been obtained for NH₃ plasma treated N₂O oxide sample. Nitrided oxide shows a larger breakdown voltage and an improved charge trapping properties under Fowler-Nordheim (F-N) constant current stress     

Characterization of C-S-H from Highly Reactive β-Dicalcium Silicate Prepared from Hillebrandite

β-dicalcium silicate synthesized by thermal dissociation of hydrothermally prepared hillebrandite (Ca₂(SiO₃)(OH)₂) exhibits extremely high hydration activity. Characterization of the hydrates obtained and investigation of the hydration mechanism was carried out with the aid of trimethylsilylation analysis, ²⁹Si magic angle spinning nuclear magnetic resonance, transmission electron microscopy selected area electron diffraction, and XRD. The silicate anion structure of C-S-H consisted mainly of a dimer and a single-chain polymer. Polymerization advances with increasing curing temperature and curing time. The C-S-H has an oriented fibrous structure and exhibits a 0.73-nm dreierketten in the longitudinal direction. On heating, the C-S-H dissociates to form β-C₂S. The temperature at which βC₂S begins to form decreases with increasing chain length of the C-S-H or as the Ca/Si ratio becomes higher. The high activity of β-C₂S is due to its large specific surface area and the fact that the hydration is chemical-reaction-rate-controlled until its completion. As a result, the hydration progresses in situ and C-S-H with a high Ca/Si ratio is formed.     

Crosslinking of amidated polybutadiene with resole. I

Various liquid polybutadiene derivatives were examined as modifiers to improve the brittleness of phenolic resins. Amidated polybutadienes obtained from a maleinated polybutadiene and ammonia had the highest curing tendency when they were reacted with resole under mild conditions. The cured resins were homogeneous and the brittleness of the phenolic resins was remarkably improved. Crosslinking efficiency was closely related to the succinamic acid group of the amidated polybutadiene. Thermal behavior of the succinamic acid group was also related to the effects of curing temperature and curing time on crosslinking. From these observations, cross-condensation between the succinamic acid group of an amidated polybutadiene and resole seemed to have occurred to a great extent than the self-condensation of resole itself and oxidative crosslinking of the amidated polybutadiene.     

Bone and calcium metabolism in Werner''s syndrome

Paracoccidioides brasiliensis, the causative agent of paracoccidioidomycosis (PCM), was first isolated from armadillos from the Amazonian region where the mycosis is uncommon. In the present study, we report on the high incidence of PCM infection in armadillos from a hyperendemic region of the disease. Four nine-banded armadillos (Dasypus novemcinctus) were captured in the endemic area of Botucatu, Sao Paulo, Brazil, killed by manual cervical dislocation and autopsied under sterile conditions. Fragments of lung, spleen, liver, and mesenteric lymph nodes were processed for histology, cultured on Mycosel agar at 37 degrees C, and homogenized for inoculation into the testis and peritoneum of hamsters. The animals were killed from week 6 to week 20 postinoculation and fragments of liver, lung, spleen, testis, and lymph nodes were cultured on brain heart infusion agar at 37 degrees C. Paracoccidioides brasiliensis was isolated from three armadillos both by direct organ culture and from the liver, spleen, lung, and mesenteric lymph nodes of hamsters. In addition, one positive armadillo presented histologically proven PCM disease in a mesenteric lymph node. The three armadillos isolates (Pb-A1, Pb-A2, and Pb-A4) presented thermodependent dimorphism, urease activity, and casein assimilation, showed amplification of the gp43 gene, and were highly virulent in intratesticularly inoculated hamsters. The isolates expressed the gp43 glycoprotein, the immunodominant antigen of the fungus, and reacted with a pool of sera from PCM patients. Taken together, the present data confirm that armadillos are a natural reservoir of P. brasiliensis and demonstrate that the animal is a sylvan host to the fungus.     

Electron-microscopic procedure for acrylic rubber

The electron-microscopic visualization of acrylic rubber dispersed in a heterogeneous structural resin composition consisting of a rubber-modified two-phase plastic comprising essentially a butyl acrylate rubber phase and an acrylonitrile–styrene copolymer phase, respectively, has been accomplished. This procedure consists of the following: The molded resin specimen is treated with hydrazine hydrate solution to produce the acrylic acid hydrazides. Allow the treated specimen to soak in osmium tetroxide solution. The acrylic rubber may be indirectly fixed and stained. Some micrographs of ultrathin sections of two or three resin compositions, cut by an ultramicrotome, are presented.