Rheological properties of polypropylene/high-density polyethylene blend melts. II. Dynamic viscoelastic properties

Three kinds of isotactic polypropylenes with different MFI were melt-blended with three kinds of high-density polyethylenes with different MFI using a screw extruder and the dynamic viscoelastic properties were studied. The storage moduli G′(ω) of the blends showed second plateaus and the dynamic viscosities η′(ω) of the blends showed two-step drops with increasing angular frequency ω. Such phenomenon was particularly notable for blend systems in which particles of lower viscosity were suspended in the disperse medium of higher viscosity and is considered to be the cause of abnormally large die swell.     

Bonding silicon wafer to silicon nitride with spin-on glass as adhesive

Using spin-on glass (SOG) as an adhesive, an Si wafer with thermal oxide was successfully bonded to one with an RF-sputtered Si3N4 film. This ensures that SOG films are effective in bonding Si wafers to less reactive surfaces than Si or SiO2 such as silicon nitride. It was also found that the previously reported bonding procedure can be simplified by suppressing the spin-induced radial striations of the SOG films.     

The evaluation of weekly hepatic arterial infusion of high-dose 5-FU for liver metastases from colorectal cancer

OBJECTIVE: The degree to which patient education in the areas of diet, exercise, and stress management can improve symptoms of irritable bowel syndrome (IBS) through healthier lifestyle behaviors is unknown. The aim of this study was to determine the effects of outpatient education on the short and long term outcomes, and the association between health-promoting behaviors and symptoms. METHODS: Pender's Health Promotion Model provided the theoretical framework. The study had a prospective longitudinal design. A consecutive sample of 52 adult outpatients with IBS attended a structured class that taught health-promoting modifications of lifestyle. Participants completed the Health-Promoting Lifestyle Profile (HPLP) and selected items from a Bowel Disease Questionnaire (BDQ) before the class and 1 month and 6 months later. Spearman rank correlations were used to assess the association between HPLP and symptom scores. Wilcoxon rank sum tests compared changes in scores versus their baseline values. RESULTS: Response rates at 1 and 6 months were 75% and 83%, respectively. Results revealed significant 1- and 6 month-improvements in pain and Manning symptoms (p < 0.01) and in some HPLP scores (exercise at 1 month, p < 0.05; stress management at 6 months, p < 0.01). Significant associations were found between some, but not all, HPLP and symptom scores over time. CONCLUSION: A structured IBS educational class for patients with IBS improved symptoms and some health-promoting behaviors. However, relationships among specific behaviors and specific symptoms did not consistently correspond with this improvement.     

Inhibition of plasma endothelin-1 concentration by captopril in patients with essential hypertension

The aim of this study was to determine whether captopril has any effect on plasma endothelin-1 (ET-1) concentration in patients with essential hypertension. Nine normotensives and eleven hypertensives were included in this study. Blood pressure and pulse rate were monitored before and at 60 min after captopril ingestion (25 mg). Simultaneously, blood samples for plasma ET-1 and plasma renin activity (PRA) determination were obtained. In the normotensives, captopril treatment resulted in a significant rise in PRA, but without statistical changes in blood pressure and plasma ET-1. By contrast, in the hypertensives, although PRA elevated similarly after captopril, both blood pressure and plasma ET-1 decreased significantly compared with their respective preloading level. These data suggest that the blood pressure-lowering effect of captopril in essential hypertension may be at least in part, mediated by its inhibition of ET-1 production from the vascular endothelium.     

The Gmicro/500 superscalar microprocessor with branch buffers

The Gmicro/500, which features a RISC-like dual-pipeline structure for high-speed execution of basic instructions and represents a significant advance for the TRON architecture, is presented. Upwardly-object-compatible with earlier members of the Gmicro series, this microprocessor uses resident dedicated branch buffers to greatly enhance branch instruction execution speed. Its microprograms simultaneously use dual execution blocks to execute high-level language instructions effectively. Fabricated with a 0.6-μm CMOS technology on a 10.9-mm×16-mm die, the chip operates at 50/66 MHz and achieves a processing rate of 100/132 MIPS     

Stability of tetragonal ZrO2 phase in Al2O3 prepared from Zr-Al organometallic compounds

Zr-Al organometallic compounds have been spray-dried and heated at temperatures 600 to 1400°C to prepare ZrO₂-Al₂O₃ composite powders. The powders consist of balloon-like particles 0.5 to 2 m in diameter with homogeneously dispersed tetragonal ZrO₂ grains 0.1 to 0.2 m in diameter. The tetragonal fraction of ZrO₂ in the composite powders is higher than that in the powders prepared from sols of Zr(OBuⁿ)₄ and Al[OCH(CH₃)₂]₃. The fraction is affected by the organofunctional group in the Zr-Al compounds.Zr(OBuⁿ)₄ = Zr(OC₄Hgⁿ)₄; Al[OCH(CH₃)₂]₃ = Al(OPrⁱ)₃.     

Analysis of accelerated creep under constant sustaining load for austenitic stainless steels

The effect of stress on creep rate of austenitic stainless steels of type 347 and 316 was studied by applying the differential test technique. It was found that the creep rate could be expressed as follows, whereB ₁ is a material constant depending on temperature,a ₁ anda _o are constants, and σ is the real stress. Considering the increase in real stress during creep process due to void formation and to the decrease in cross sectional area of the specimen, integrating the above equation yields the following creep curve, 1 $$ \in = \in _m + \frac{1}{{n_o \left( {c_o + 1} \right)}}ln\frac{1}{{1 - n_o \left( {c_o + 1} \right) \in _m (t - t_{_m } )}}$$ where ∈ is the creep strain at a given time (t), ∈_m is the minimum creep rate, ∈_m andt _m are the strain and time, respectively, at the minimum creep rate,n _o is a constant, andc _o is the material constant relating to the void formation. This equation agrees very well with the experimental creep curve.     

Theranostic Agent Combining Fullerene Nanocrystals and Gold Nanoparticles for Photoacoustic Imaging and Photothermal Therapy

Developing photoactivatable theranostic platforms with integrated functionalities of biocompatibility, targeting, imaging contrast, and therapy is a promising approach for cancer diagnosis and therapy. Here, we report a theranostic agent based on a hybrid nanoparticle comprising fullerene nanocrystals and gold nanoparticles (FGNPs) for photoacoustic imaging and photothermal therapy. Compared to gold nanoparticles and fullerene crystals, FGNPs exhibited stronger photoacoustic signals and photothermal heating characteristics by irradiating light with an optimal wavelength. Our studies demonstrated that FGNPs could kill cancer cells due to their photothermal heating characteristics in vitro. Moreover, FGNPs that are accumulated in tumor tissue via the enhanced permeation and retention effect can visualize tumor tissue due to their photoacoustic signal in tumor xenograft model mice. The theranostic agent with FGNPs shows promise for cancer therapy.     

PNET “ONDM 2019” special issue

Photonic Network Communications -     

Removal of Interlayer Water of two Ti3C2Tx MXenes as a Versatile Tool for Controlling the Fermi-Level Pinning-Free Schottky Diodes with Nb:SrTiO3

Striving for the sixth-generation communication technology discovery, semiconductors beyond Si with wider bandgaps as well as non-conventional metals are actively being sought to achieve high speeds whilst maintaining devices miniaturization. 2D materials may provide the potential for downsizing, but their functional advantage over existing counterparts still longs to be discovered. Along that path, surface-adsorbed or bulk-intercalated water molecules remaining after wet-chemical synthesis of 2D materials are generally seen as obstacles to high-performance achievement. Herein, the control of such water within the interlayers of solution-processed metallic 2D titanium carbide (MXene) by vacuum annealing duration is demonstrated. Moreover, the impact of water removal on work function (WF) and functional terminations is unveiled for the first time. Furthermore, the usefulness of such water for controlling a novel Schottky diode in contact with an n-type oxide semiconductor, niobium-doped strontium titanate (Nb:SrTiO₃) is observed. The advantage of MXene compared to conventional gold as facile processing, WF tunability, and lower turn-on voltage in the Schottky anode application is highlighted. This fundamental study shows the way for a novel Schottky diode preparation in atmospheric conditions and provides implications for further research directions aiming at commercialization.