How to identify water from thickener aqueous solutions by touch

Water detection is one of the most crucial psychological processes for many animals. However, nobody knows the perception mechanism of water through our tactile sense. In the present study, we found that a characteristic frictional stimulus with large acceleration is one of the cues to differentiate water from water contaminated with thickener. When subjects applied small amounts of water to a glass plate, strong stick-slip phenomena with a friction force of 0.46 ± 0.30 N and a vertical force of 0.57 ± 0.36 N were observed at the skin surface, as shown in previous studies. Surprisingly, periodic shears with acceleration seven times greater than gravitational acceleration occurred during the application process. Finite-element analyses predicted that these strong stimuli could activate tactile receptors: Meissner''s corpuscle and Pacinians. When such stimuli were applied to the fingertips by an ultrasonic vibrator, a water-like tactile texture was perceived by some subjects, even though no liquid was present between the fingertip and the vibrator surface. These findings could potentially be applied in the following areas: materials science, information technology, medical treatment and entertainment.     

Expression of aldehyde dehydrogenase gene increases hydrogen production from low concentration of acetate by Rhodobacter sphaeroides

Rhodobacter sphaeroides RV (RV) is a hydrogen-producing bacterium exhibiting the highest yield of hydrogen production from organic acids such as lactate and acetate, which are the byproducts of hydrogen fermentation by hydrogen-producing anaerobic bacteria. Co-fermentation of the RV strain with anaerobic bacteria is an efficient method of hydrogen production. However, less than 21 mM acetate is produced by the anaerobic bacteria, which is too low for efficient hydrogen production by the RV strain; it requires approximately 75 mM acetate. In this study, 2 distinct isozymes of aldehyde dehydrogenase from Rhodospirillum rubrum were separately overexpressed in the RV strain. The recombinant RV strains that were designated as RVAD1 and RVAD2, exhibited 13-fold higher ALDH activities than the wild-type RV strain. Hydrogen yields of both of the recombinant strains were 1.4-fold higher than that of the RV strain in 21 mM acetate. In 43 mM acetate, the RVAD1 strain showed higher yield, though the RVAD2 strain showed lower yield as compared to that of the RV strain. In 64 mM acetate and all concentrations of lactate tested (21, 43 and 64 mM), the yields of the recombinant strains were lower than those of the RV strain. The intact (empty) expression plasmid increased the ALDH activity and had little effect on the hydrogen production in acetate, however, it decreased the production in lactate. At the beginning of the fermentation process, when very little hydrogen had been produced, the recombinant strains expressing the ALDH gene consumed smaller amounts of acetate compared to the wild-type strain. We have discussed the effects of ALDH on hydrogen production in this report.     

Analysis of essential amino acid residues for catalytic activity of glutaminase from Micrococcus luteus K-3

Structural-based mutational analysis of salt-tolerant glutaminase from Micrococcus luteus K-3 (Micrococcus glutaminase) revealed that three amino acid residues, S64, K67, and E160, were essential to a catalytic reaction. The result suggested that Micrococcus glutaminase had a possible catalytic mechanism similar to class A beta-lactamase rather than glutaminase-asparaginase from Pseudomonas 7A.     

Characterization of Catalase from Psychrotolerant Psychrobacter piscatorii T-3 Exhibiting High Catalase Activity

A psychrotolerant bacterium, strain T-3 (identified as Psychrobacter piscatorii), that exhibited an extraordinarily high catalase activity was isolated from the drain pool of a plant that uses H(2)O(2) as a bleaching agent. Its cell extract exhibited a catalase activity (19,700 U·mg protein(-1)) that was higher than that of Micrococcus luteus used for industrial catalase production. Catalase was approximately 10% of the total proteins in the cell extract of the strain. The catalase (PktA) was purified homogeneously by only two purification steps, anion exchange and hydrophobic chromatographies. The purified catalase exhibited higher catalytic efficiency and higher sensitivity of activity at high temperatures than M. luteus catalase. The deduced amino acid sequence showed the highest homology with catalase of Psycrobacter cryohalolentis, a psychrotolelant bacterium obtained from Siberian permafrost. These findings suggest that the characteristics of the PktA molecule reflected the taxonomic relationship of the isolate as well as the environmental conditions (low temperatures and high concentrations of H(2)O(2)) under which the bacterium survives. Strain T-3 efficiently produces a catalase (PktA) at a higher rate than Exiguobacterium oxidotolerans, which produces a very strong activity of catalase (EktA) at a moderate rate, in order to adapt to high concentration of H(2)O(2).     

Metal cation–acidic proton bifunctional catalyst for methane activation: conversion of CH4 in the presence of ethylene over metal cations-loaded H-ZSM-5

It has been investigated that ¹³CH₄ reacts with ethylene over metal cations such as indium cations-loaded H-ZSM-5 to form singly ¹³C-labeled propylene (¹³C¹²C₂H₆) and hydrogen at 673 K. The heterolytic dissociation of C---H bond in methane presumably proceeds by the reaction of methane with metal cations for the formation of CH₃^δ+ and metal hydride species, thus allowing the reaction of CH₃^δ+ with ethylene to form propylene and acidic protons. Metal cations are regenerated by the reaction of silver-hydride species with acidic protons, and hydrogen is simultaneously formed. Thus, bifunctionality of metal cations and acidic protons is essential for the activation of methane.     

Pore Structure and Shape Selectivity of Platinum-Promoted Cesium Salts of 12-Tungstophosphoric Acid

Pore-widths and pore-size distributions of 0.5 wt% Pt-Cs_xH_3-xPW₁₂O₄₀ have been studied by means of adsorption of various molecules. For the distributions of micropore and mesopore, isotherms of Ar and N₂ adsorption were analyzed, respectively. Pt-Cs_2.1H_0.9PW₁₂O₄₀ possessed only ultramicropores. On the other hand, the pores of Pt-Cs_xH_3-xPW₁₂O₄₀ (x = 2.3, 2.5, 2.8 and 3.0) showed bimodal distributions in the range from micropore to mesopore, and the widths of both pores tended to increase as the Cs content increased. From the amounts and rates of adsorption for n-butane and isobutane, the pore width of Pt-Cs_2.1H_0.9PW₁₂O₄₀ was determined to be close to the molecular size of n-butane, that is, 0.43 nm. The fraction of external surface area in the total surface area of Pt-Cs_2.1H_0.9PW₁₂O₄₀ was estimated to be only 0.06 from the adsorption of 1,3,5-trimethylbenzene and t-plot of N₂ adsorption. Pt- Cs_2.1H_0.9PW₁₂O₄₀ exhibited a shape selectivity due to the uniform ultramicropores and small external surface area; it catalyzed the oxidation of n-butane but not that of isobutane. SEM and TEM measurements revealed the primary crystallites and their aggregated states.     

Use of a highly sensitive latex reagent with amino acid spacer for determination of C-reactive protein concentration in a variety of liver diseases

C-reactive protein (CRP) is a major acute-phase protein, which is extremely important in inflammatory disease diagnosis. CRP is rapidly elevated in various diseases as a result of tissue injury, infection and inflammation. Recently, many reports have shown its usefulness as a risk marker for arteriosclerosis and metabolic syndrome. However, the lack of sensitivity of existing CRP assays has hampered CRP testing in conditions associated with viral infections, where CRP levels typically elevate only marginally. In this report, we prepared a novel, ultra-sensitive latex-based CRP test using amino acid spacers with a high sensitivity and a wider assay range. Our method of conjugating latex beads enabled us to measure CRP in the range of 5-500?ng/mL in patient sera. Furthermore, we studied CRP levels in patients with various liver diseases, such as chronic hepatitis, liver cirrhosis and hepatic carcinoma, in order to examine the correlation between severity of liver dysfunction and CRP levels, and to examine the likelihood of recurrence of liver dysfunction. The reagent was simple to prepare and sensitive during clinical investigation, where it discriminated clearly between normal subjects and those with liver diseases. Therefore, we conclude that our ultra-sensitive CRP assay will contribute greatly to the clinical study of hepatic disorders.     

Friction dynamics of human hair treated with water or cationic surfactant aqueous solution

Cationic surfactants are adsorbed on the surface of human hair and exhibit a lubricating effect. Here, we evaluated the friction when the hair treated with water or 1 wt% cationic surfactant (cetyltrimethylammonium bromide) aqueous solution was rubbed by a contact probe equipped in a sinusoidal motion friction evaluation system. Because of the rough structure of the cuticle on the human hair surface, an oscillatory phenomenon with a frequency of 50–70 Hz was observed when untreated hair was rubbed with a contact probe. On the other hand, the oscillatory phenomenon was not observed when the hair contained a large amount of water because stick–slip phenomena were inhibited on the soft, swollen hair surface. Furthermore, the change in kinetic friction coefficient and delay time, which is a normalized value of the time difference between the reaction of the friction force to accelerated motion, from untreated hair, Δμ_k and Δδ, was almost zero. However, we found a large difference in Δμ_k and Δδ for the hair treated with cationic surfactant aqueous solution. The treatment with cationic surfactant reduced both friction parameters, Δμ_k and Δδ, indicating that the treatment induced not only the frictional force but also the profile at the beginning of frictional sliding. The significant lubrication is due to cationic surfactant adsorption on the hair surface. These data imply that the smoothness of hair treated with a cationic surfactant is related to a reduction in friction coefficient and delay time δ.     

Pickering emulsions and capsules stabilized by wool powder particles

We prepared emulsions and capsules that were stabilized by wool powder particles. These powder particles were adsorbed on oil-water interfaces, and they formed both oil-in-water and water-in-oil emulsions. These emulsions were observed in ternary systems containing silicone oil, n-dodecane, fluoric oil, oleic acid, or linoleic acid as the oil phase.