A unified proposal for characteristic testing methods and figure of merit of 8‐kV/3.5‐kVA class light‐triggered thyristors

Power devices with high capability have been developed. 8‐kV/3.5‐kA‐class light‐triggered thyristors have the highest capability among power devices. These devices are used in the Kii Channel HVDC transmission system in Japan. In this paper, we report the extracted problems of conventional testing methods of 8‐kV/3.5‐kA‐class light‐triggered thyristors among manufacturers, and the proposed unified testing methods on the basis of element characteristics and operating conditions in the Kii Channel HVDC system. Furthermore, we propose a figure of merit for power devices for the practical use, and try to extract elements used at the Kii Channel HVDC system with small margins and low withstand capabilities. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 140(3): 61–70, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10024     

NiCoFe/C cathode electrocatalysts for direct ethanol fuel cells

A direct ethanol fuel cell (DEFC), which is less prone to ethanol crossover, is reported. The cell consists of PtRu/C catalyst as the anode, Nafion^® 117 membrane, and Ni–Co–Fe (NCF) composite catalyst as the cathode. The NCF catalyst was synthesized by mixing Ni, Co, and Fe complexes into a polymer matrix (melamine-formaldehyde resins), followed by heating the mixture at 800 °C under inert atmosphere. TEM and EDX experiments suggest that the NCF catalyst has alloy structures of Ni, Co and Fe. The catalytic activity of the NCF catalyst for the oxygen reduction reaction (ORR) was compared with that of commercially available Pt/C (CAP) catalyst at different ethanol concentrations. The decrease in open circuit voltage (V_oc) of the DEFC equipped with the NCF catalysts was less than that of CAP catalyst at higher ethanol concentrations. The NCF catalyst was less prone to ethanol oxidation at cathode even when ethanol crossover occurred through the Nafion^®117 film, which prevents voltage drop at the cathode. However, the CAP catalyst did oxidize ethanol at the cathode and caused a decrease in voltage at higher ethanol concentrations.     

Systematic analysis of glycosphingolipids in the human gastrointestinal tract: Enrichment of sulfatides with hydroxylated longer-chain fatty acids in the gastric and duodenal mucosa

The composition of the glycosphingolipids of the human gastrointestinal tract was studied. The major neutral glycosphingolipids were ceramide monohexosides (e.g., GalCer, GlcCer), LacCer, Gb₃Cer, Gb₄Cer and more polar ones with more than four sugars, whereas neither Gg₃Cer nor Gg₄Cer were present. The acidic glycosphingolipids consisted of sulfatides and gangliosides such as G_M3, G_M1, G_D3 and G_D1a. Also a large amount of sulfatides was found in the gastric mucosa and duodenum. The concentrations of sulfatides in the fundic mucosa, antral mucosa and duodenum amounted to 416.0, 933.8 and 682.9 nmol/g of dry weight, respectively, exceeding those in the gastric mucosa and kidney of other mammals. The major molecular species of the sulfatides were identified as I³SO₃-GalCer with hydroxylated longer-chain fatty acids based on the analyses by gas-liquid chromatography and negative ion fast-atom bombardment mass spectrometry. In contrast, gangliosides in these regions showed a tendency to be lower than sulfatides, and the molar ratios of sulfatides to gangliosides were about 2.0, whereas those in other parts were less than 0.5. A high content of sulfatides in the gastric and duodenal mucosa, where mucosa is easily insulted by acid, pepsin and bile salts, may be closely related to their roles in mucosal protection. The nomenclature used for gangliosides and other glycosphingolipids follows the system of Svennerholm (Ref. 1) and the recommendation of the IUPAC-IUB Commission (Ref. 2), respectively.     

Calibration Curve for Quantitative Analysis of the Monoclinic-Tetragonal ZrO2 System by X-Ray Diffraction

A nonlinear calibration curve for volume fraction vs integrated intensity ratio was obtained for the monoclinic-tetragonal ZrO² system by using X-ray powder pattern-fitting and pattern-decomposition techniques. The empirical equation agrees well with the theoretical one. By using this equation, the deviation from linearity (6.8% maximum) resulting from the intensity difference of corresponding reflections of the two phases can be estimated quite accurately.     

Effect of metallic ions in photo-induced graft copolymerization onto cellulose

In photo-induced graft copolymerization of methyl methacrylate onto cellulose, the effect of metallic ions as sensitizer was investigated. Some metallic ions were effective in their adsorbed states and accelerated the formation of grafts in the order Fe²⁺ > Ag⁺ > Fe³⁺. However, Cu²⁺ acted negatively, and little effect was observed for Co²⁺, Ni²⁺, Mn²⁺, Zn²⁺, and Cr³⁺. In the systems in which aqueous metallic salt solutions were added, the formation of grafts was generally depressed, but Fe³⁺ was an exception. The effect of metallic ions on the scission reaction of cellulose main chains did not necessarily agree with the effect on the formation of grafts. This is attributed to the varied interaction between cellulose and the different active species produced by irradiation, depending on the type of metallic ions used.     

A control method with pheromone information for a transport system

Since the control methods of a transport system between processing machines are specialized for each layout of the system, it is difficult to design prompt schedules and control logic for new complicated systems, especially in cases of machine faults or restructuring the system to modify the layout. In this article, we describe a multiagent transport control system which utilizes pheromone information. Each element of the system acts as an agent and estimates the appropriate path and time to drive out the products using information obtained by communication with other elements as well as pheromone information deposited on the tracks of the products.     

Fabrication of high hardness Ni mold with electroless nickel–boron thin layer

The nickel electroforming method using a high-concentration nickel sulfamate bath is commonly used to fabricate micro metal molds in the LIGA process; however, this method does not produce micro metal molds of sufficient hardness. One means of improving the hardness of micro metal molds made using the nickel electroforming method is to include additives in the nickel plating solution. Another method is nickel alloy plating or a similar technique. In this research, we used a nickel–boron (Ni–B) electroless alloy plating method to obtain a hard nickel plated film having hardness of 832 Hv. It was also ascertained that Ni–B electroless alloy plated film retains its high hardness even during heat treatment in conditions of 250°C for 1 h. To deal with the high stresses developed in high-hardness plated films, we proposed double-layer nickel electroforming. This method is covered and used on conventional nickel electroforming layer by high hardness micro mold. High hardness micro metal mold using double-layer was fabricated by nickel electroforming and Ni–B electroless alloy plating method.     

A procedure to analyze surface profiles of the protein molecules visualized by quick-freeze deep-etch replica electron microscopy

Quick-freeze deep-etch replica electron microscopy gives high contrast snapshots of individual protein molecules under physiological conditions in vitro or in situ. The images show delicate internal pattern, possibly reflecting the rotary-shadowed surface profile of the molecule. As a step to build the new system for the "Structural analysis of single molecules", we propose a procedure to quantitatively characterize the structural property of individual molecules; e.g. conformational type and precise view-angle of the molecules, if the crystallographic structure of the target molecule is available. This paper presents a framework to determine the observed face of the protein molecule by analyzing the surface profile of individual molecules visualized in freeze-replica specimens. A comprehensive set of rotary-shadowed views of the protein molecule was artificially generated from the available atomic coordinates using light-rendering software. Exploiting new mathematical morphology-based image filter, characteristic features were extracted from each image and stored as template. Similar features were extracted from the true replica image and the most likely projection angle and the conformation of the observed particle were determined by quantitative comparison with a set of archived images. The performance and the robustness of the procedure were examined with myosin head structure in defined configuration for actual application.     

Modeling of debris cooling with annular gap in the lower RPV and verification based on ALPHA experiments

For severe accident assessment in a light water reactor, heat transfer models in a narrow annular gap between the overheated core debris and the reactor pressure vessel (RPV) are important for evaluating RPV integrity and emergency procedures. Using existing data, the authors developed heat transfer models on the average critical heat flux (CHF) restricted by countercurrent flow limitation (CCFL) and local boiling heat fluxes, and showed that the average CHF depended on the steam–water flow pattern in the narrow gap and that the local heat fluxes were similar to the pool boiling curve. We evaluated the validity of heat transfer models by simple calculations for ALPHA experiments performed at Japan Atomic Energy Research Institute. Calculated results showed that heat fluxes on the crust surface were restricted mainly by thermal resistance of the crust after the crust formation, and emissivity on the crust surface did not have much effect on the heat fluxes. The calculated vessel temperature during the heat-up process and peak vessel temperature agreed well with the measurements, which confirmed the validity of the average CHF correlation. However, the vessel cooling rate was underestimated mainly due to underestimation of the gap size.     

One-step route to a hybrid TiO2/TixW1?xN nanocomposite by in situ selective carbothermal nitridation

Metal oxide/nitride nanocomposites have many existing and potential applications, e.g. in energy conversion or ammonia synthesis. Here, a hybrid oxide/nitride nanocomposite (anatase/Ti_xW_1−xN) was synthesized by an ammonia-free sol–gel route. Synchrotron x-ray diffraction, complemented with electron microscopy and thermogravimetric analysis, was used to study the structure, composition and mechanism of formation of the nanocomposite. The nanocomposite contained nanoparticles (<5 nm diameter) of two highly intermixed phases. This was found to arise from controlled nucleation and growth of a single oxide intermediate from the gel precursor, followed by phase separation and in situ selective carbothermal nitridation. Depending on the preparation conditions, the composition varied from anatase/Ti_xW_1−xN at low W content to an isostructural mixture of Ti-rich and W-rich Ti_xW_1−xN at high W content. In situ selective carbothermal nitridation offers a facile route to the synthesis of nitride-oxide nanocomposites. This conceptually new approach is a significant advance from previous methods, which generally require ammonolysis of a pre-synthesized oxide.