Processing and characterization of solid and microcellular PHBV/PBAT blend and its RWF/nanoclay composites

Solid and microcellular components made of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/poly (butylene adipate-co-terephthalate) (PBAT) blend (weight ratio of PHBV:PBAT = 30:70), recycled wood fiber (RWF), and nanoclay (NC) were prepared via a conventional and microcellular-injection molding process, respectively. Morphology, thermal properties, and mechanical properties were investigated. The addition of 10% RWF (both untreated and silane-treated) reduced the cell size and increased the cell density of the microcellular components. Also, the addition of 10% RWF (both untreated and silane-treated) generally increased the specific Young’s modulus and tensile strength, but decreased the specific toughness and strain-at-break in both solid and microcellular components. Moreover, unlike the neat PHBV/PBAT blend, microcellular PHBV/PBAT/RWF (both untreated and silane-treated) composites showed higher specific toughness and strain-at-break compared to their solid counterparts. In addition, higher specific toughness and strain-at-break was observed in the PHBV/PBAT/untreated-RWF composite compared with the PHBV/PBAT/silane-treated RWF composite, particularly in the microcellular components. The degree of PHBV crystallinity increased significantly in both solid and microcellular PHBV/PBAT/RWF composites although the degree of PHBV crystallinity in the solid components was slightly higher than that of their microcellular counterparts. The effects of adding 2% nanoclay on the properties of the PHBV/PBAT/silane-treated-RWF composite were also investigated. The nanoclays exhibited an intercalated structure in the composites based on XRD analysis and did not induce significant changes in the cell morphology and mechanical properties of the PHBV/PBAT/silane-treated-RWF composite. However, it did improve its thermal stability.     

Microcellular poly(hydroxybutyrate‐co‐hydroxyvalerate)‐hyperbranched polymer–nanoclay nanocomposites

The effects of incorporating hyperbranched polymers (HBPs) and different nanoclays [Cloisite® 30B and halloysite nanotubes (HNT)] on the mechanical, morphological, and thermal properties of solid and microcellular poly(hydroxybutyrate‐co‐hydroxyvalerate) (PHBV) were investigated. According to the X‐ray diffraction (XRD) and transmission electron microscopy (TEM) analyses, Cloisite 30B exhibited a combination of exfoliation and heterogeneous intercalation structure for both solid and microcellular PHBV–12% HBP–2% Cloisite 30B nanocomposites. TEM images indicated that HNTs were uniformly dispersed throughout the PHBV matrix. The addition of 2% nanoclays improved the thermal stability of the resulting nanocomposites. The addition of HBP+poly(maleic anhydride‐alt‐1‐octadecene) (PA), Cloisite 30B, and HNT reduced the average cell size and increased the cell density of the microcellular components. The addition of (HBP+PA), Cloisite 30B, and HNT also increased the degree of crystallinity for both solid and microcellular components in comparison with neat PHBV. Also, with the addition of 12% (HBP+PA), the area under the tan‐δ curve, specific toughness, and strain‐at‐break of the PHBV–HBP nanocomposite increased significantly for both solid and microcellular specimens, whereas the storage modulus, specific Young's modulus, and specific tensile strength decreased. The addition of 2% nanoclays into the PHBV–HBP nanocomposites improved the storage modulus, specific Young's modulus, and specific tensile strength of the PHBV–HBP–nanoclay‐based nanocomposites, but they were still lower than those of the neat PHBV. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Effects of annealing time and temperature on the crystallinity and heat resistance behavior of injection‐molded poly(lactic acid)

The effects of annealing time and temperature on the crystallinity of injection‐molded poly(lactic acid) (PLA) were investigated using differential scanning calorimetry and wide‐angle x‐ray diffraction. Differential scanning calorimetry, tensile test, and dynamic mechanical analysis showed that an increase in crystallinity in the PLA parts from the annealing treatment offers several benefits such as a higher glass transition temperature, better heat resistance, and greater storage modulus and tensile strength. Based on the experimental data, the degree of crystallinity, annealing time, and annealing temperature were found to closely follow the time–temperature superposition relationship. Namely, a master curve could be constructed based on either the Williams–Landel–Ferry equation or the Arrhenius relationship by shifting the crystallinity isotherms in the logarithmic scale horizontally along the log‐time axis. This relationship provides a quantitative guideline for annealing postinjection‐molded PLA parts to improve the heat resistance and mechanical properties. An increase of over 17% and 26% in tensile strength was achieved at an annealing temperature of 80°C for 30 min and 65°C for 31 h, respectively. POLYM. ENG. SCI. 2013. © 2012 Society of Plastics Engineers     

Melt compounding and characterization of poly(lactide) stereocomplex/natural rubber composites

Poly(lactide) (PLA) is an interesting biodegradable polymer but has limited application because of its brittleness and low thermal stability. We found that both drawbacks of PLA were solved by forming stereocomplexes augmented with natural rubber (NR). Equal amounts of poly(l ‐lactide) (PLLA) and poly(d‐ lactide) (PDLA) stereoisomers were blended to form a stereocomplex (St‐PLA). Varying amounts of NR (5–30% by weight) were added simultaneously to equal amounts of the stereo isomers by melt blending. FTIR and XRD spectra demonstrated that, despite the added NR, the stereocomplex structures were still generated and complete. Stereocomplex crystallinity decreased with increasing NR content, verified by DSC and XRD, as well as polarizing optical micrographs which showed fewer spherulites at higher NR content. Measured glass transition temperatures (T_g) of St‐PLA/NR blends were significantly lower than for neat St‐PLA, exhibiting shifts to as low as 46°C at 30%wt NR content, because of rubber dispersed in St‐PLA segments expanding the free volume and enhancing chain mobility. Thermal stability of the blends, estimated by TGA, showed desired results, for example, at the 50% weight loss point, the temperature of all St‐PLA/NR blends moved to higher temperatures than neat St‐PLA. POLYM. ENG. SCI., 2017. © 2017 Society of Plastics Engineers     

Processing and characterization of recycled poly(ethylene terephthalate) blends with chain extenders,thermoplastic elastomer,and/or poly(butylene adipate‐co‐terephthalate)

Poly(ethylene terephthalate) (PET) resin is one of the most widely used thermoplastics, especially in packaging. Because thermal and hydrolytic degradations, recycled PET (RPET) exhibits poor mechanical properties and lacks moldability. The effects of adding elastomeric modifiers, chain extenders (CE), and poly(butylene adipate‐co‐terephthalate), PBAT, as a toughener to RPET on its moldability and mechanical property were investigated. Melt blending of RPET with CE, thermoplastic elastomer (TPE), and/or PBAT was performed in a thermokinetic mixer (K‐mixer). The blended materials were then injection molded to produce tensile specimens. Various techniques were used to study the mechanical properties, rheological properties, compatibility, and crystallization behavior of the RPET blends. By melt blending with proper additives, recycled PET regained its moldability, thereby enabling the recycling of RPET. Furthermore, the addition of CE greatly enhanced the mechanical properties of RPET. While the RPET and TPE blends also showed improved mechanical properties, the improvement was less significant and the blends were often immiscible due to the difference in polarities between RPET and TPE. Finally, it was found that the mechanical properties of RPET blends depended on the prior thermal history of the material and could be improved with an extra annealing step that increased the degree of crystallinity. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Processing and characterization of solid and microcellular PHBV/coir fiber composites

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/coir fiber composites were prepared via both conventional and microcellular injection-molding processes. The surface of the hydrophilic coir fiber was modified by alkali- and silane-treatment to improve its adhesion with PHBV. The morphology, thermal, and mechanical properties were investigated. The addition of coir fiber (treated and untreated) reduced cell size and increased cell density. Further decrease in cell size and increase in cell density was observed for treated fibers compared with PHBV/untreated-fiber composites. Mechanical properties such as specific toughness and strain-at-break improved for both solid and microcellular specimens with the addition of coir fibers (both treated and untreated); however, the specific modulus remained essentially the same statistically while the specific strength decreased slightly. The silane-treated coir fiber composites showed the greatest improvement in specific toughness and strain-at-break among the treated-fiber composites. In addition, adding coir fibers (treated and untreated) also increased the degree of crystallinity of the PHBV composites. PHBV with treated coir fibers showed a higher degree of crystallinity compared with untreated coir fibers.