New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties

Understanding the structure/property relationship in polymer/layered silicate nanocomposites is of great importance in designing materials with desired properties. In order to understand these relations, a series of polylactide (PLA)/organically modified layered silicate (OMLS) nanocomposites have been prepared using a simple melt extrusion technique. Four different types of OMLS have been used for the preparation of nanocomposites, three were modified with functionalized ammonium salts while fourth one was a phosphonium salt modified OMLS. The structure of the nanocomposites in the nanometer scale was characterized by using wide-angle X-ray diffraction and transmission electron microscopic observations. Using four different types of layered silicates modified with four different types of surfactants, the effect of OMLS in nanocomposites was investigated by focusing on four major aspects: structural analysis, thermal properties and spherulite morphology, materials properties, and biodegradability. Finally, we draw conclusions about the structure/property relationship in the case of PLA/OMLS nanocomposites.     

Gaze direction based vehicle teleoperation method with omnidirectional image stabilization and automatic body rotation control

In robot teleoperation, a robot works as a physical agent at a remote site for a robot operator. There are mainly two tasks in robot teleoperation using camera images: environment recognition using visual information and robot control according to the recognition. In this paper, we propose a gaze direction based vehicle teleoperation method with an omnidirectional image stabilization and an automatic body rotation control. In the proposed method, we manage above two tasks in the same manner that are usually treated separately. This method is an intuitive vehicle teleoperation method where an operator do not need to have concern about vehicle body orientations and can absorb differences of vehicle driving mechanisms. That is, this method frees an operator from being bothered from controlling a vehicle and the operator can concentrate on where he/she intends to go. This method mainly consists of two technologies: an omnidirectional image stabilization technology and automatic body rotation control. The conducted experiments show effectiveness of the proposed method.     

Risk assessment of airborne fine particles and nanoparticles

Pulmonary health effects of fine particles and nanoparticles are overviewed in this paper, mainly based on the researches conducting in our laboratory. For the hazard assessment, we exposed rats to aerosolized asbestos-substitutes or nanoparticles aerosols (nickel oxide and titanium dioxide), and examined the biological and pathological effects of the particle on lung, a major target organ for the particles, and cytokines which are related to inflammation, fibrosis and carcinogenesis in the lung. It is essential to perform comprehensive evaluation of the toxicity of poorly soluble powder samples using the precise characterization data and exposure methods, such as single instillation or aerosol inhalation.     

Optimizing the design of large-scale ground-coupled heat pump systems using groundwater and heat transport modeling

In order to predict the long-term performance of large-scale ground-coupled heat pump (GCHP) systems, it is necessary to take into consideration well-to-well interference, especially in the presence of groundwater flow. A mass and heat transport model was developed to simulate the behavior of this type of system in the Akita Plain, northern Japan. The model was used to investigate different operational schemes and to maximize the heat extraction rate from the GCHP system.     

Comparison of the radiation dose in a cardiac IVR X-ray system

In this study, the entrance surface dose rates received by a phantom during cineangiography and fluoroscopy were compared. The X-ray conditions used in the measurements were those normally used in facilities performing percutaneous coronary intervention. Although, today, the entrance surface doses (cineangiography and fluoroscopy) of X-ray equipment used for cardiac interventional radiology (IVR) tends to be lower than they were previously, some equipment produces a high radiation dose. Therefore, the X-ray equipment used for cardiac IVR procedures must be maintained in good repair and must be carefully calibrated. In addition, periodic measurement of the radiation dose from the X-ray equipment used for both cineangiography and fluoroscopy for cardiac IVR is necessary. If the radiation dose of the X-ray system in use is too high, the IVR staff should determine the reason and make an effort to reduce it. Hence, the IVR staff must be adequately trained in radiation protection.     

Novel Near‐Infrared Squaraine Sensitizers for Stable and Efficient Dye‐Sensitized Solar Cells

A new molecular design strategy for tuning the energy levels of cis‐configured squaraine sensitizers for dye‐sensitized solar cells is described. The Hammett substituent constant and the π‐conjugation length are used as quantitative indicators to modify the central squarate moiety of the sensitizer dyes; specifically, novel near‐infrared squaraine dyes HSQ3 and HSQ4 are synthesized by incorporation of an electron‐withdrawing and π‐extending ethyl cyanoacetate unit on the central squarate moiety. The solution absorption maximum of HSQ4 occurs at 703 nm, and the energy levels of the lowest unoccupied molecular orbital and the highest occupied molecular orbital are in the ideal range for energetically efficient electron injection and regeneration of the oxidized dye. A solar cell sensitized with HSQ4 exhibits a broad incident photo­n‐to‐current conversion efficiency spectrum, extending into the near‐infrared region with a maximum value of 80% at 720 nm, which is is the highest value reported for a squaraine dye–based dye‐sensitized solar cell. The HSQ4‐sensitized solar cell also exhibits excellent durability during light soaking, owing to the double anchors attaching the dye to the TiO₂ surface and to the long alkyl chains extending outward from the surface.     

MAP kinase pathways as a route for regulatory mechanisms of IL-10 and IL-4 which inhibit COX-2 expression in human monocytes

Herein we describe a new test system to produce a standardized partial muscle-tendon junction (MTJ) stretch injury. In anesthetized rabbits the tibialis anterior (TA) muscle-tendon unit is unilaterally shortened using a custom designed clamp roller system. An angular displacement (average velocity of 450 degrees x s[-1]) is applied about the foot to plantarflex the ankle 90 degrees while the lower extremity is fixed. During ankle rotation the TA muscle is tetanically stimulated to generate an eccentric stretch injury at the MTJ. Forty-eight hours after injury, isometric torque deficit (injured/sham) was measured. Two groups of animals (N = 6 in each group) were tested with the only difference between the two groups being the initial tendon shortening. In Group 1 (tendon shortening = 1.2 cm. N = 6) the torque deficit was 36.7+/-5.9% (mean+/-SD). In Group 2 (tendon shortening = 1.5 cm. N = 6) the torque deficit was 58.7+/-7.4% (mean+/-SD). No order effect was suggested by the data (P = 0.6062), but the difference in torque deficit between the two groups was highly significant (P = 0.0001). For all tests in which the tendon was temporarily shortened before muscle stimulation and stretch (N = 12) there was a visible hematoma at the MTJ similar to the injury that is common in athletic injuries. Histological evaluation 48 h after injury revealed both fiber tearing and inflammation at the MTJ. In addition, there was focal fiber damage in the muscle belly for both groups. The damage and inflammatory process, however, were more severe in the group with greater initial tendon shortening.     

“Click Peptide“: pH‐Triggered in Situ Production and Aggregation of Monomer Aβ1–42

Into neutral : We demonstrate the unique features of a pH click peptide based on an O‐acyl isopeptide method. Under acidic conditions, the click peptide remains in a monomeric form. Upon increase of the pH to 7.4, the click peptide is quickly able to convert into Aβ1–42 through an O‐to‐N intramolecular acyl migration. Further study using this pH click peptide would elucidate the pathological role of Aβ1–42 in Alzheimer's disease.

     

Physician-received scatter radiation with angiography systems used for interventional radiology: comparison among many X-ray systems

Radiation protection for interventional radiology (IR) physicians is very important. Current IR X-ray systems tend to use flat-panel detectors (FPDs) rather than image intensifiers (IIs). The purpose of this study is to test the hypothesis that there is no difference in physician-received scatter radiation (PRSR) between FPD systems and II systems. This study examined 20 X-ray systems in 15 cardiac catheterisation laboratories (11 used a FPD and 9 used an II). The PRSR with digital cineangiography and fluoroscopy were compared among the 20 X-ray systems using a phantom and a solid-state-detector electronic pocket dosemeter. The maximum PRSR exceeded the minimum PRSR by ~12-fold for cineangiography and ~9-fold for fluoroscopy. For both fluoroscopy and digital cineangiography, the PRSR had a statistically significant positive correlation with the entrance surface dose (fluoroscopy, r = 0.87; cineangiography, r = 0.86). There was no statistically significant difference between the average PRSR of FPDs and IIs during either digital cineangiography or fluoroscopy. There is a wide range of PRSR among the radiography systems evaluated. The PRSR correlated well with the entrance surface dose of the phantom in 20 X-ray units used for IR. Hence, decreasing the dose to the patient will also decrease the dose to staff.     

The excellent water-solubility of N-[3-(dimethyl-amino)propyl] docosanamide chloride : the most eco-friendly cationic hair conditioning agent

A new hair-conditioning agent, N-[3-(dimethylamino)propyl]docosanamide (APA-22) hydrochloric acid salt (APA-22 HCl), has excellent solubility in water with a solubility limit over 10-times larger than that of other APA hydrochloric salts with shorter alkyl chain lengths. The physicochemical characteristics of APA-22 HCl were studied at 25 degrees C by using equilibrium surface tension (gamma), solubilization of an oil-soluble dye, steady-state fluorescence, and chloride ion selective electrode techniques. The APA-22 HCl salt is considered to form an aggregate at a concentration, C(1), which is about twice the concentration of the solubility limit of APAs with shorter alkyl chains. At a higher concentration, C(2), the aggregates of APA-22 HCl start forming another kind of aggregate, which is able to solubilize oil-soluble materials. That is, C(1) is considered to represent the critical aggregation concentration (cac) and C(2) a morphology transition. In the concentration region between C(1) and C(2) the solutions are seemingly transparent whereas at above C(2) they appear bluish or translucent. Since the Krafft point of APA-22 HCl is 55 degrees C, all the solutions, including the aggregates, are thought to exist in metastable states. Notably, however, these metastable solutions do not change significantly over a few months. The excellent solubility of APA-22 HCl in water is considered to be a result of this unique stepwise aggregation with increasing concentration.