基于Sql Server BI平台和决策树技术的CET-4成绩分析

文章首先对Sql Server 2008商业智能平台及决策树技术相关理论作了介绍,然后对挖掘数据源数据进行了一系列预处理。利用Sql Server 2008商业智能平台下的决策树技术并采用数据挖掘扩展语言即DMX语言创建了CET-4成绩分析决策树模型。分类矩阵和挖掘提升图分别对该模型的评估结果表明了模型具有较高的可靠性和分类准确度,同时模型对应的一些规则可作为英语教学管理和改革的重要参考依据。     

Depolymerization of Turkish lignites. I. Effect of substituted phenols

A lignite (C, 67.4 wt%) was depolymerized with phenol, p-nitrophenol and o-chlorophenol using sulphuric acid as catalyst. The solubility of the lignite was enhanced by these treatments, with phenol being the most reactive reagent whereas p-nitrophenol was the least reactive. The distribution of nitro- and chloro-groups in the solubilized products was investigated by infrared spectrometry and it was found that these groups were redistributed among the pyridine- and methanol-soluble materials. It is suggested that benzene-soluble material is produced by self-depolymerization of coal or by degradation of pyridine- and methanol-soluble material.     

Unveiling the presence of mixed oxidation states of Europium in Li7+δEuxLa3−δZr2−δO12−δ garnet and its impact on the Li-ion conductivity

Recently, lanthanides have been employed by researchers to examine their impact on the structure and properties of Li₇La₃Zr₂O₁₂ (LLZO) garnets. In this regard, we developed Europium oxide (Eu₂O₃) doped LLZO (Li_7+δEu_xLa_3−δZr_2−δO_12−δ) solid electrolyte which demonstrates a cubic phase with the symmetry of Iad (No.230) at room temperature. In this investigation, different concentrations of Eu ranging from 0.1 to 0.6 atoms per formula unit (pfu) were doped into Li₇La₃Zr₂O₁₂ to evaluate the impact of Eu on the stability of the cubic phase and thereby the ionic conductivity. The results unveiled that upon doping Eu³⁺ ions, the Eu²⁺ state is also formed and is then self-doped into the structure in which Rietveld refinement coupled with XPS, EPR, and solid-state NMR suggests that Eu³⁺ ions most probably partially occupy Zr⁴⁺ (16a) site, the Eu²⁺ ions occupy La³⁺ (24d) site, and the Li⁺ ions occupy two different sites (24d and 96h). It was further found that such a site preference induces distortion at LaO₈ polyhedrons opening up the neck for Li-ions diffusion, thereby enhancing the ionic conductivity. Moreover, it was revealed that Li-ions probably hop from 96h to 24d and then to 96h site to generate the Li-ion movement. Overall, by introducing Eu ions into the LLZO structure, an enhanced bulk ionic conductivity of 0.30 × 10⁻³ S/cm at 298 K with a minimum electronic conductivity of 2.547 × 10⁻⁹ S/cm at 298 K was achieved.     

交流电风扇能效检测方法探讨

针对GB/T 13380-2007《交流电风扇和调速器》中有关交流电风扇能效检测的方法以及所要求的检测系统,对检测所用设备的影响进行分析,通过对检测结果的计算,最终得到测量结果的不确定度,以分析、评估检测结果的可靠性.最后根据现有实验室水平提出了对检测设备改进措施的建议.     

Near-optimal communication-time tradeoff in fault-tolerant computation of aggregate functions

This paper considers the problem of computing general commutative and associative aggregate functions (such as Sum) over distributed inputs held by nodes in a distributed system, while tolerating failures. Specifically, there are N nodes in the system, and the topology among them is modeled as a general undirected graph. Whenever a node sends a message, the message is received by all of its neighbors in the graph. Each node has an input, and the goal is for a special root node (e.g., the base station in wireless sensor networks or the gateway node in wireless ad hoc networks) to learn a certain commutative and associate aggregate of all these inputs. All nodes in the system except the root node may experience crash failures, with the total number of edges incidental to failed nodes being upper bounded by f. The timing model is synchronous where protocols proceed in rounds. Within such a context, we focus on the following question:

Under any given constraint on time complexity, what is the lowest communication complexity, in terms of the number of bits sent (i.e., locally broadcast) by each node, needed for computing general commutative and associate aggregate functions?

This work, for the first time, reduces the gap between the upper bound and the lower bound for the above question from polynomial to polylog. To achieve this reduction, we present significant improvements over both the existing upper bounds and the existing lower bounds on the problem.

     

SUPERCRITICAL EXTRACTION OF ISRAELI MISHOR ROTEM OIL SHALE 1. BATCH EXTRACTION WITH TOLUENE

ABSTRACT

Recovery of organic material from Israeli Mishor Rotem oil shale with toluene under supercritical conditions was investigated. The rate of solubilization, change of structural aspects and molecular weights of solubilized products with time were investigated. Experiments to recover organic material from shale were performed in a stainless steel high pressure autoclave. Shale Sample was charged in a sintered glass crucible suspended from the cap of the autoclave; toluene was the solvent in all experiments. Solvent/shale ratio was 20; experimental temperature was 34O^°C. The gaseous products were analyzed by gas chromatography. Molecular weights of the organic material recovered was measured by gel permeation chromatography technique. FTIR spectra of the organic material recovered and fractions isolated by extractive and chromatographical methods were measured. The amount of kerogen remaining in the spent shale was determined by oxidative derivative thermal gravimetry. A steady state in the production of solubles was reached within 60 minutes at 340^°C with a yield of 60 percent. After this time no further amounts of organic material was recovered. The molecular weights of the recovered organic material decreased at extended times after the steady state was reached. It appeared that the structure of the organic material recovered remained unchanged until the steady state condition is reached whereupon some structural changes occurred. At extended times the organic material was converted into more aromatic and less hydroxyl containing structures of lower molecular weight. The organic material recovered upon reaching steady state was fractionated into 63 percent oils (pentane solubles) and 32 percent asphaltenes (toluene solubles). The oile contained aliphatics and monoaromatic structures and the asphaltenes contained polyaromatic polar structures. Gases which constituted 4 percent of the initial kerogen were produced during the heating period to 340^°C. The amount of carbon monoxide produced remained constant and amounts of hydrogen, carbon dioxide and methane decreased after supercritical conditions were attained.     

Polyphenols Extracted from Black Tea (Camellia sinensis) Residue by Hot‐Compressed Water and Their Inhibitory Effect on Pancreatic Lipase in vitro

Abstract: Polyphenols, retained in black tea wastes following the commercial production of tea beverages, represent an underutilized resource. The purpose of this study was to investigate the potential use of hot‐compressed water (HCW) for the extraction of pancreatic lipase‐inhibiting polyphenols from black tea residues. Black tea residues were treated with HCW at 10 °C intervals, from 100 to 200 °C. The resulting extracts were analyzed using high‐performance liquid chromatography‐mass spectrometry and assayed to determine their inhibitory effect on pancreatic lipase activity in vitro. Four theaflavins (TF), 5 catechins, 2 quercetin glycosides, quinic acid, gallic acid, and caffeine were identified. The total polyphenol content of extracts increased with increasing temperature but lipase inhibitors (TF, theaflavin 3‐O‐gallate, theaflavin 3′‐O‐gallate, theaflavin 3,3′‐O‐gallate, epigallocatechin gallate, and epicatechin gallate) decreased over 150 °C. All extracts inhibited pancreatic lipase but extracts obtained at 100 to 140 °C showed the greatest lipase inhibition (IC₅₀s of 0.9 to 1.3 μg/mL), consistent with the optimal extraction of TFs and catechins except catechin by HCW between 130 and 150 °C. HCW can be used to extract pancreatic lipase‐inhibiting polyphenols from black tea waste. These extracts have potential uses, as dietary supplements and medications, for the prevention and treatment of obesity. Practical Application: Active forms of lipase inhibitors can be recovered from black tea residues. They could be used as dietary supplements or medications.     

Storage of hydrogen in nanostructured carbon materials

Recent developments focusing on novel hydrogen storage media have helped to benchmark nanostructured carbon materials as one of the ongoing strategic research areas in science and technology. In particular, certain microporous carbon powders, carbon nanomaterials, and specifically carbon nanotubes stand to deliver unparalleled performance as the next generation of base materials for storing hydrogen. Accordingly, the main goal of this report is to overview the challenges, distinguishing traits, and apparent contradictions of carbon-based hydrogen storage technologies and to emphasize recently developed nanostructured carbon materials that show potential to store hydrogen by physisorption and/or chemisorption mechanisms. Specifically touched upon are newer material preparation methods as well as experimental and theoretical attempts to elucidate, improve or predict hydrogen storage capacities, sorption–desorption kinetics, microscopic uptake mechanisms and temperature–pressure–loading interrelations in nanostructured carbons, particularly microporous powders and carbon nanotubes.     

一种空空导弹复合制导交接班方案设计

首先分析空空复合制导交接班的特点以及交接时间点。然后结合具体的制导律,设计一种与不同的中段制导律、末段制导律匹配的空空复合制导交接班方案,实现中段制导和末段制导的平滑过渡,确定交接时间点。最后经理想制导系统仿真,验证了方案的有效性。