3-D MCM封装技术及其应用

介绍了超大规模集成电路（VLSI）用的3-D MCM封装技术的最新发展，重点介绍了3-D MCM封装垂直互连工艺，分析了3-D MCM封装技术的硅效率、复杂程度、热处理、互连密度、系统功率与速度等问题，并对3-D MCM封装的应用作了简要说明。     

官能团化MCM-41在分离低碳醇-水混合物中的应用

采用一步法水热合成了介孔材料氯丙基官能团化的MCM-41(Cl(CH2)3-MCM-41)、氨丙基官能团化MCM-41(NH2(CH2)3-MCM-41)、甲基官能团化MCM-41(CH3-MCM-41)和氯丙基官能团化硅胶,并考察了它们作为气相色谱固定相分离低碳醇-水混合物的情况。实验结果表明,Cl(CH2)3-MCM-41能够分离低碳醇-水混合物中的各组分,随水、甲醇、乙醇、异丙醇、正丁醇极性的减小,各分子与Cl(CH2)3-MCM-41的作用力增强,保留时间延长。氯丙基官能团化硅胶、NH2(CH2)3-MCM-41)和CH3-MCM-41均不能分离低碳醇-水混合物,表明介孔材料规则的孔道结构、表面嫁接基团等对低碳醇-水混合物的分离有重要影响。同时考察了Cl(CH2)3-MCM-41的氯丙基负载量对低碳醇-水混合物分离效果的影响,结果表明,当氯丙基的摩尔分数为15%时,分离效果最佳。     

基于逻辑器件的可编程增益放大器设计

本文介绍了可编程增益放大器设计的方法。它主要由控制电路、放大电路、显示电路三大模块组成。该系统性能好、成本低、工作可靠,具有一定的工程应用价值,经测试表明,该设计基本上达到了设计的要求。     

Correction to: Bismuth Yttrium Oxide (Bi3YO6), A New Electrode Material For Asymmetric Aqueous Supercapacitors

Journal of Inorganic and Organometallic Polymers and Materials - The original version of this article unfortunately contained mistakes. In line 9 of the abstract, 5% should read as 2%. The...     

Role of La2O3 in Pd-Supported Catalysts for Methanol Decomposition

Systems of Pd supported on various La₂O₃-modified -Al₂O₃ and CeO₂–Al₂O₃ catalysts were tested for catalytic methanol decomposition and characterized by means of XRD, BET, TPR, H₂-chemisorption and CO–FTIR. The addition of lanthanum significantly improved the selectivity of CO and H₂ for all the catalysts but showed a different influence on the catalytic activity in two systems. Methanol conversion decreased on La₂O₃-modified Pd/-Al₂O₃ catalysts, in line with the reduction of Pd dispersion, while the addition of La₂O₃ improved the dispersion of Pd and reinforced Pd–CeO₂ interaction for La₂O₃-modified Pd/CeO₂–Al₂O₃ catalysts, which resulted in a high production rate of CO and H₂. Thus, a synergistic effect between CeO₂ and La₂O₃ was observed on -Al₂O₃-supported Pd catalyst for methanol decomposition.     

CaO–ZrO2 Solid Solution: A Highly Stable Catalyst for the Synthesis of Dimethyl Carbonate from Propylene Carbonate and Methanol

CaO–ZrO₂ prepared by co-precipitation showed to be a well-performed catalyst for the transesterification of propylene carbonate (PC) and methanol. The characterization by X-ray powered diffraction (XRD) and Raman spectroscopy indicated that CaO was doped into the lattice of ZrO₂ to form CaO–ZrO₂ solid solution. Such a solid solution was a strong solid base, which was proved by CO₂ temperature program desorption (CO₂-TPD). As a result, the catalyst showed high stability towards the transesterification of propylene carbonate and methanol into dimethyl carbonate with high PC conversion, especially being subjected to the continuous production of dimethyl carbonate at reactive distillation reactor for 250 h without any obvious loss of activity at the PC conversion of 95%.     

Preparation and Catalytic Performance of Mesostructured Aluminosilicate Nano-particles with Wormhole-Like Framework Structure

A facile two-step sol–gel method has been developed for the preparation of mesostructured aluminosilicate nano-particles (Si/Al = 7.5) with wormhole-like but uniform pore structures and highly catalytic activities towards bulky hydrocarbon cracking. It is desirable that, as this synthesis takes place in the absence of alkali cations, the mesoporous nano-particulate material is directly obtained in the acid form, making a subsequent ion-exchange and calcination treatment superfluous.     

湿浸法制备活性组分非均匀分布负载型催化剂过程的计算机模拟

对活性组分非均匀分布的负载型催化剂的湿浸法制备过程进行了计算机模拟,其模拟程度可适用于任意多个活性组分的浸渍。发现单组分浸渍时,通过控制浸渍时间可获得活性组分由薄到厚的蛋壳型分布和均匀分布,但通过预浸渍吸附至一定分布后,再在空白溶液中浸渍洗脱,控制洗脱条件也可获得蛋黄、蛋白型的分布;加入竞争吸附剂,进行双组分及多组分浸渍,通过控制浸渍溶液性质及浸渍时间可获得各种类型的活性组分分布,诸如蛋壳型、蛋白型、蛋黄型和均匀型。通过对制备过程参数(如竞争吸附剂的选择、各组分有效扩散系数、初始浓度、吸脱附速率常数等)与活性组分分布形式之间关系的分析,可实现对任一分布形式的催化剂的制备过程参数的优化。这对实际制备催化剂具有指导意义。     

Highly moisture-proof polysilsesquioxane coating prepared via facile sol-gel process

A highly moisture-proof polysilsesquioxane coating was obtained from a new bis-silylated precursor, which was synthesized from 3-aminopropyltriethoxysilane (APTES) and m-xylylene diisocyanate (m-XDI) in tetrahydrofuran (THF) and verified by ¹H MAS NMR. For direct comparison purposes, an SiO₂ coating was also prepared by the Stöber method using tetraethoxysilane (TEOS) as the reactant. Interestingly, the coating obtained from the polysilsesquioxane sol exhibited a much higher moisture resistance capability than its counterpart, which was attributed to its more compact feature between nanoparticles as characterized by N₂ absorption experiment and transmission electron microscopy (TEM). Furthermore, its high transparency of about 92% showed potential for application in the protection of optical crystals.