Simultaneous measurement of the resistivity and permeability of afilm sample with a double coil

A method is proposed for a simultaneous measurement of the resistivity and permeability of a film inserted between two coils facing each other. Connecting in series, the total impedance of the coils was measured in two ways, i.e., 1) the current passes through the coils in the same direction, and 2) the current passes through each coil in opposite directions to each other. The resistivity and permeability of the film were simultaneously obtained from the difference in the impedance for the two cases. It was theoretically found that the optimum frequency for high accuracy in the measurement was proportional to the resistivity and inversely proportional to a thickness of a sample film. The results of the simultaneous measurements of the resistivity and permeability of nickel films of a thickness ranging from 0.01-0.08 mm at a frequency range of 1-100 kHz are shown in this paper. The measured values of the resistivity and permeability with this method agreed with the values obtained by conventional methods, i.e., the dc four-probe method for the resistivity measurement and the toroidal coil method for the permeability measurement     

Performance evaluation and effect of biogas circulation rate of a bubble column for biological desulfurization

Biological desulfurization using a bubble column reactor was investigated in a continuous biogas treatment. Rapid biogas circulation between the digester and the bubble column for biological desulfurization was used to stimulate the gas-liquid mass transfer of H(2)S. A positive correlation between the biogas circulation rate and H(2)S removal rate was observed. Moreover, the increase in the circulation rate stimulated the O(2) mass transfer, eventually translating into an increase in sulfate production from the oxidation of H(2)S. Throughout the continuous experiment, the reactor retained sufficient levels of sulfide-oxidizing bacteria. A comparison of the results of the continuous biogas treatment and batch tests suggests that the gas-liquid mass transfer rate of H(2)S was the rate-limiting step in the biological desulfurization in the reactor, indicating that the mass transfer efficiency of H(2)S needs to be improved to enhance the desulfurization performance.     

A FAST METHOD OF RADIATIVE HEAT TRANSFER ANALYSIS BETWEEN ARBITRARY THREE-DIMENSIONAL BODIES COMPOSED OF SPECULAR AND DIFFUSE SURFACES

The radiation element method by ray emission model (REM²) has been improved by using the law of reciprocity for the specular view factor and the incomplete Cholesky conjugate gradient (ICCG) method to reduce computational time. This improved method was applied to analyze the radiative heat transfer between arbitrary three-dimensional bodies composed of specular and diffuse surfaces. The accuracy of the improved method was evaluated by comparing analytical solutions. And the method was used to calculate radiative heat transfer between machine elements and heater panels. CPU time to calculate the radiative exchange for a model composed of 3193 elements was reduced to 1/430 of that by the previous numerical method using a decomposition method.     

Direct and Indirect Exciton Dynamics in Few‐Layered ReS2 Revealed by Photoluminescence and Pump‐Probe Spectroscopy

Atomically thin‐layered ReS₂ with a distorted 1T structure has attracted attention because of its intriguing optical and electronic properties. Here, the direct and indirect exciton dynamics of a three‐layered ReS₂ is investigated by polarization‐resolved transient photoluminescence (PL) and ultrafast pump‐probe spectroscopy. The various time scales of the decay signals of the time‐resolved PL (<10 ps), with monitoring of the populations of electron–hole pairs (exciton), and the transient differential reflectance (≈1 and 100 ps), with monitoring of the populations of electrons and/or holes in the excited states, are observed. These results reveal the characteristic exciton dynamics: rapid relaxation of direct excitons (electron–hole pairs) and slow relaxation of the momentum‐mismatched indirect excitons accompanied by a one‐phonon emission process. These findings provide important information regarding the indirect bandgap nature of few‐layered ReS₂ and its characteristic exciton dynamics, boosting the understanding of the novel electronic and optical properties of atomically thin‐layered ReS₂.     

Glucosamine Extends the Lifespan of Caenorhabditis elegans via Autophagy Induction

Glucosamine (GlcN) is commonly used as a dietary supplement to promote cartilage health in humans. We previously reported that GlcN could induce autophagy in cultured mammalian cells. Autophagy is known to be involved in the prevention of various diseases and aging. Here, we showed that GlcN extended the lifespan of the nematode Caenorhabditis elegans by inducing autophagy. Autophagy induction by GlcN was demonstrated by western blotting for LGG-1 (an ortholog of mammalian LC3) and by detecting autophagosomal dots in seam cells by fluorescence microscopy. Lifespan assays revealed that GlcN-induced lifespan extension was achieved with at least 5 mM GlcN. A maximum lifespan extension of approximately 30 % was achieved with 20 mM GlcN (p<0.0001). GlcN-induced lifespan extension was not dependent on the longevity genes daf-16 and sir-2.1 but dependent on the autophagy-essential gene atg-18. Therefore, we suggest that oral administration of GlcN could help delay the aging process via autophagy induction.     

Product mix problems considering several probabilistic conditions and flexibility of constraints

This paper considers product mix problems including randomness of future returns, ambiguity of coefficients and flexibility of upper value with respect to each constraint such as budget, human resource, time and several costs. Particularly, the flexibility is assumed to be a fuzzy goal. Then, several models based on maximizing total future profits under a level of satisfaction to each fuzzy goal are proposed. Furthermore, the model considering preference ranking to each fuzzy goal of constraints is proposed. Since these problems are basically formulated as nonlinear programming problems, the transformations into deterministic equivalent problems are introduced and the efficient solution methods are developed. A numerical example for product mix problem is given to illustrate our proposed models.     

Generation of single-walled carbon nanotubes from alcohol and generation mechanism by molecular dynamics simulations

Recent advances in high-purity and high-yield catalytic chemical vapor deposition (CVD) generation of single-walled carbon nanotubes (SWNTs) from alcohol are comprehensively presented and discussed on the basis of results obtained from both experimental and numerical investigations. We have uniquely adopted alcohol as a carbon feedstock, and this has resulted in high-quality, low-temperature synthesis of SWNTs. This technique can produce SWNTs even at a very low temperature of 550 degrees C, which is about 300 degrees C lower than the conventional CVD methods in which methane or acetylene is typically used. We demonstrate the excellence of the proposed alcohol catalytic CVD method for high-yield production of SWNTs when Fe-Co on USY-zeolite powder was used as a catalyst. At optimum CVD conditions, a SWNT yield of more than 40 wt % was achieved over the weight of the catalytic powder within the reaction time of 120 min. In addition to the advantages for mass production, this method is also suitable for the direct synthesis of high-quality SWNTs on Si and quartz substrates when combined with the newly developed liquid-based "dip-coat" technique to mount catalytic metals on the surface of substrates. This method allows easy and costless loading of catalytic metals without the need for any support or underlayer materials that were usually required in previous studies for the generation of a sufficient quantity of SWNTs on an Si surface. Finally, the result of molecular dynamics simulation for the SWNT growth process is presented to obtain a fundamental insight into the initial growth mechanism on the catalytic particles.     

Structurally Diverse Polyamines: Solid‐Phase Synthesis and Interaction with DNA

A versatile solid‐phase approach based on peptide chemistry was used to construct four classes of structurally diverse polyamines with modified backbones: linear, partially constrained, branched, and cyclic. Their effects on DNA duplex stability and structure were examined. The polyamines showed distinct activities, thus highlighting the importance of polyamine backbone structure. Interestingly, the rank order of polyamine ability for DNA compaction was different to that for their effects on circular dichroism and melting temperature, thus indicating that these polyamines have distinct effects on secondary and higher‐order structures of DNA.     

Growth and development of colorectal cancer with subclassification on submucosa and proper muscle infiltrating cancer

Colorectal cancer (CRC) infiltrating the submucosa (sm cancer) and the proper muscle (mp cancer) represent an early and an intermediate stage in the development of CRC, and sm and mp cancer are therefore appropriate to discuss the natural history of CRC. A total of 337 sm cancers and 291 mp cancers resected in our series were evaluated. We divided sm and mp cancers into three categories, respectively, sm 1, sm 2, sm 3, mp 1, mp 2, and mp 3, according to the depth of infiltration of the submucosa or the proper muscle. The deeper the invasion, the larger of the tumor size, and the proportion of depressed type in their configuration increases. On the contrary, the proportion of tumors with adenomatous component decreases. A larger proportion of tumors in all categories of infiltration showed PG more of ten than that of NPG in their marginal structure. In this study, 17% of sm cancer and 23% of mp cancer might develop not via the adenoma-carcinoma sequence.