Benchmark experiment of large-angle scattering reaction cross section of iron at 14 MeV using two shadow bars – Comparison of experimental results with ENDF/B-VIII –

ABSTRACT

It is important to perform neutron transport simulations with accurate nuclear data in the neutronics design of a fusion reactor. However, absolute values of large-angle scattering cross sections vary among nuclear data libraries even for well-examined nuclide of iron. Benchmark experiments focusing on large-angle scattering cross sections were thus performed to confirm the correctness of nuclear data libraries. The series benchmark experiments were performed at a DT neutron source facility, OKTAVIAN of Osaka University, Japan, by the unique experimental system established by the authors’ group, which can extract only the contribution of large-angle scattering reactions. This system consists of two shadow bars, target plate (iron), and neutron detector (niobium). Two types of shadow bars were used and four irradiations were conducted for one experiment, so that contribution of room-return neutrons was effectively removed and only large-angle scattering neutrons were extracted from the measured four Nb reaction rates. The obtained experimental results were compared with calculations for five nuclear data libraries including JENDL-4.0, JEFF.-3.3, FENDL-3.1, ENDF/B- VII, and recently released ENDF/B-VIII. It was found from the comparison that ENDF/B-VIII showed the best result, though ENDF/B-VII showed overestimation and others are in large underestimation at 14 MeV.     

Ammonia production using iron nitride and water as hydrogen source under mild temperature and pressure

Ammonia generation was studied in the reaction between water and nitrogen-containing iron at 323 K and atmospheric pressure. Similar to metallic Fe, the interstitial compound Fe₃N reduced water through Fe oxidation to produce hydrogen gas, while the N combined with atomic hydrogen to produce ammonia as a byproduct. The addition of carbon dioxide to this system accelerated the reaction with concomitant consumption of carbon dioxide. The promoted ammonia production upon addition of carbon dioxide can be attributed to the generation of atomic hydrogen from the redox reaction of carbonic acid and Fe, as well as removal of used Fe from the reaction system through the formation of a soluble carbonato complex. When carbonate was added to the reaction system, the production rates of ammonia and hydrogen increased further. The results here confirmed that ammonia can be synthesized from iron nitride under mild conditions by utilizing carbon dioxide.     

Molecular Targeted Therapy for the Bone Loss Secondary to Pyogenic Spondylodiscitis Using Medications for Osteoporosis: A Literature Review

Pyogenic spondylodiscitis can cause severe osteolytic and destructive lesions in the spine. Elderly or immunocompromised individuals are particularly susceptible to infectious diseases; specifically, infections in the spine can impair the ability of the spine to support the trunk, causing patients to be bedridden, which can also severely affect the physical condition of patients. Although treatments for osteoporosis have been well studied, treatments for bone loss secondary to infection remain to be elucidated because they have pathological manifestations that are similar to but distinct from those of osteoporosis. Recently, we encountered a patient with severely osteolytic pyogenic spondylodiscitis who was treated with romosozumab and exhibited enhanced bone formation. Romosozumab stimulated canonical Wnt/β-catenin signaling, causing robust bone formation and the inhibition of bone resorption, which exceeded the bone loss secondary to infection. Bone loss due to infections involves the suppression of osteoblastogenesis by osteoblast apoptosis, which is induced by the nuclear factor-κB and mitogen-activated protein kinase pathways, and osteoclastogenesis with the receptor activator of the nuclear factor-κB ligand-receptor combination and subsequent activation of the nuclear factor of activated T cells cytoplasmic 1 and c-Fos. In this study, we review and discuss the molecular mechanisms of bone loss secondary to infection and analyze the efficacy of the medications for osteoporosis, focusing on romosozumab, teriparatide, denosumab, and bisphosphonates, in treating this pathological condition.     

Wide-band polarization-independent tensile-strained InGaAs MQW-SOAgate

A high-performance tensile-strained InGaAs multi-quantum-well semiconductor optical amplifier (MQW-SOA) gate developed for wavelength-division-multiplexing (WDM) applications is reported. The -0.47% InGaAs-strained SOA gate has a very low polarization dependence of 0.3 dB over a driving current between 30 and 60 mA and a wide-input signal wavelength range from 1530 to 1580 nm. The fabrication tolerance of the mesa stripe width is very large, ranging from 1.0 to 1.75 μm. The MQW-SOA gate has an extinction ratio of more than 40 dB. The fiber-to-fiber lossless operation current is less than 50 mA over the fiber-amplifier gain band. The gating speed is less than 1 ns     

Moisture migration in idealized bilayer systems: relationships among water-associated properties, structure, and texture

The effects of composition and thermal treatment on the water sorption and diffusional properties of idealized protein gels arranged in bilayer configurations were determined; these water binding/migration properties were related to the mechanical characteristics of the gels. Samples were prepared from whey protein concentrate (WPC), they consisted of water:WPC ratios of 1.5 to 5.67, and were thermally set for 20–60 min. Moisture migration rates from samples interfaced with filters were determined, as were moisture sorption capacities of samples immersed in water. The physical properties of the gels were assessed by uniaxial compression and microscopy. Results showed that gel strength and consequent extent of protein interaction—as affected by thermal treatment—controlled the ability of the gel structure to absorb water. Sorption was exponentially correlated with gel modulus and linearly correlated with a function of protein content, heating time, and immersion time. Rates of diffusion from interfaced gels were dependent solely on water content. It was concluded that the degree of protein interaction, whether influenced by concentration or thermal treatment, affected network extensibility and thus the capacity of the gels to act as receptors of moisture. Results have implications for the functionality of shelf-stable sandwiches and other multicomponent foods.     

Data fitting with a spline using a real-coded genetic algorithm

To obtain a good approximation for data fitting with a spline, frequently we have to deal with knots as variables. The problem to be solved then becomes a continuous nonlinear and multivariate optimization problem with many local optima. Therefore, it is difficult to obtain the global optimum. In this paper, we propose a method for solving this problem by using a real-coded genetic algorithm. Our method can treat not only data with a smooth underlying function, but also data with an underlying function having discontinuous points and/or cusps. We search for the best model among candidate models by using the Bayes Information Criterion (BIC). With this, we can appropriately determine the number and locations of knots automatically and simultaneously. Five examples of data fitting are given to show the performance of our method.     

Subarachnoid haemorrhage induced proliferation of leptomeningeal cells and deposition of extracellular matrices in the arachnoid granulations and subarachnoid space. Immunhistochemical study

Subarachnoid haemorrhage (SAH) often leads to subarachnoid fibrosis and resultant normal pressure hydrocephalus; however, how subarachnoid fibrosis occurs is unknown. We examined the changes within arachnoid granulations (AGs) and the subarachnoid space (SAS) chronologically at the parasagittal region obtained from patients with SAH at autopsy and made comparison with controls by immunostaining for cytokeratin, specific marker for leptomeningeal cells and by the elastica Masson-Goldner methods. Within a week some AGs were torn, and many inflammatory cells filled the AGs and SAS. Cytokeratin positive cells were scarce. During the next two weeks cytokeratin positive cells increased. After three weeks, AGs and SAS were filled by dense deposits of extracellular matrices surrounded by multiple layers of leptomeningeal cells.     

The role of aluminum in automotive weight reduction—part III

This series of articles provides, from an international perspective, an analysis of the future of the automotive industry and aluminum’s role in automobile weight reduction. Part I briefly described technological, environmental, and societal issues that are mandating vehicular weight reduction for, among other reasons, purposes of fuel economy. Part II described the status of the weight-reduction technologies that are currently available and projects how they may evolve in the coming years. Part III, the final installment, examines some of the specific strengths and weaknesses of aluminum alloys with regard to their long-term attractiveness to automakers.     

Distribution of total uptime during a given time interval

The distribution of total uptime during a given time interval for a repairable system is obtained. The total uptime is the total amount of time the system is up (in operation) during the interval. It is assumed that: (1) the system starts to operate at the beginning of the interval and alternately takes only the two states, up and down (under repair); (2) repair restores the system to “like-new”. A simple approximation to the distribution function of total uptime for a shorter interval is presented