Modelling aerodynamic sound in the airways of a human body: A possible diagnostic tool

The sound generated aerodynamically by a pillow-like body simulating an obstacle in the human airway is observed through a soft wall from outside the duct. It is intended to provide a physical basis for an attempted medical diagnostic technique for detecting an obstacle by observing the sound during breathing. So far at least two kinds of sound have been identified: One is sound of the half-jet flow formed downstream of the obstacle, and the other is sound due to unsteady motion of the separation point on the curved surface of the obstacle. For simulating the flow condition downstream of the vocal cords during inhalation, cases with an obstacle at various positions relative to a jet flow are also examined. In this case, the sound due to the downstream obstacle exhibits a complicated dependence on the geometry and flow parameters. Nevertheless, increase in the sound, or more correctly, deformation in the sound power spectrum, due to the presence of an obstacle is detectable from outside, opening up possibilities of its use as a diagnostic aid. Dedicated to the late Professor Itiro Tani on the occasion of 5ACFM, Taejon, Korea     

Wide gamut LCD using locally dimmable four‐primary‐color LED backlight

This paper proposes a wide gamut LCD using locally dimmable four‐primary‐color (4PC) LED backlight. Although the color gamut of LCDs has been improved in recent years, it is insufficient to reproduce all the colors in the real world. The objective of this paper is to propose a wide gamut LCD that reproduces all the colors in the real world while keeping the cost increases to a minimum. We evaluated the color gamut reproduced by LEDs of multiple primary colors and selected cyan as the optimal color to be added to the three primary colors to reproduce all the colors in the real world. Therefore, we designed an LED backlight consisting of an additional only‐cyan LED with three‐primary‐color LEDs and developed a prototype LCD with 4PC LED backlight. Furthermore, we developed a local dimming algorithm for the 4PC LED backlight. As a result, we confirmed that the prototype LCD with the 4PC LED backlight is able to cover almost all the colors in the real world and also able to display natural images with highly saturated colors by local dimming.     

Combination of bottleneck feature extraction and dereverberation for distant-talking speech recognition

The performance of speech recognition in distant-talking environments is severely degraded by the reverberation that can occur in enclosed spaces (e.g., meeting rooms). To mitigate this degradation, dereverberation techniques such as network structure-based denoising autoencoders and multi-step linear prediction are used to improve the recognition accuracy of reverberant speech. Regardless of the reverberant conditions, a novel discriminative bottleneck feature extraction approach has been demonstrated to be effective for speech recognition under a range of conditions. As bottleneck feature extraction is not primarily designed for dereverberation, we are interested in whether it can compensate for other carefully designed dereverberation approaches. In this paper, we propose three schemes covering both front-end processing (cascaded combination and parallel combination) and back-end processing (system combination). Each of these schemes integrates bottleneck feature extraction with dereverberation. The effectiveness of these schemes is evaluated via a series of experiments using the REVERB challenge dataset.     

Self-generation of reward by logarithmic transformation of multiple sensor evaluations

Artificial Life and Robotics - Although the design of the reward function in reinforcement learning is important, it is difficult to design a system that can adapt to a variety of environments and...     

Revolving Vernier Mechanism Controls Size of Linear Homomultimer

A new kind of the Vernier mechanism that is able to control the size of linear assembly of DNA origami nanostructures is proposed. The mechanism is realized by mechanical design of DNA origami, which consists of a hollow cylinder and a rotatable shaft in it connected through the same scaffold. This nanostructure stacks with each other by the shape complementarity at its top and bottom surfaces of the cylinder, while the number of stacking is limited by twisting angle of the shaft. Experiments have shown that the size distribution of multimeric assembly of the origami depends on the twisting angle of the shaft; the average lengths of the multimer are decamer, hexamer, and tetramer for 0°, 10°, and 20° twist, respectively. In summary, it is possible to affect the number of polymerization by adjusting the precise shape and movability of a molecular structure.     

Structural hierarchy developed in injection molding of nylon 6/clay/carbon black nanocomposites

The influence of platelet-type clay nanoparticle (nanoplatelet) on the structural evolution in injection-molded nylon 6)/carbon composites was investigated. In the absence of nanoplatelets, the nylon 6/CB systems were found to exhibit unoriented structure with nylon 6 crystalline regions exhibiting exclusively α crystal form throughout the thickness of the samples. However, inclusion of nanoplatelets induces substantial local orientation of the nylon 6 chains in the molded parts in all processing conditions and compositions. In these clay/nylon 6/CB ternary nano systems, nylon 6 matrix was found to be exclusively in γ crystal form at the skin regions and α crystal form fraction increases towards the core of the molded parts as a result of decrease in cooling rate with depth during the solidification stage. Two nanoplatelet orientation behaviors were identified: (i) in the absence of irregular shaped CB, the nanoplatelets align parallel with one another following the local flow patterns. The latter behavior also causes enhanced orientation of the nylon 6 chains undergoing substantial shear amplification trapped in between the nanoplatelets (ii) in the CB-enriched regions, nanoplatelets though still remaining parallel to one another, are randomized by following the local contours of irregular shaped CB aggregates. These CB aggregates themselves were found to organize to form trains in larger scale as a result of flow alignment.     

Direct Observation of Pure Cu and Cu-Ag Anode Passivation in H2SO4-CuSO4 Aqueous Solution by Channel Flow Double Electrode and Optical Microscopy

Metallurgical and Materials Transactions B - The dissolution and passivation of pure Cu and Cu-5 wt pct Ag anodes in H2SO4-CuSO4 electrolyte were investigated by a direct...     

ArchaeoSTOR: A data curation system for research on the archeological frontier

The broad adoption of diagnostic and analytical techniques in the field of archeology, presents a unique opportunity for e-Science in the form of scientific explanation, drawing from methodologies aimed at recording, archiving, analyzing, and disseminating, rich data collections to create the needed infrastructure for both research and web-based curation and data management system. This paper presents a needed stepping stone towards synergy between information technology and archeology, by introducing a data acquisition, tagging and characterization pipeline along with a novel method for spatially querying archeological data.     

γ‐Butyrolactone‐processable high‐modulus poly(ester imide)s

γ‐Butyrolactone (GBL)‐processable high modulus heat‐resistant materials were developed in this work. The polyaddition of an ester‐containing tetracarboxylic dianhydride, i.e. hydroquinone bis(trimellitate anhydride) (TAHQ), and 2,2′‐bis(trifluoromethyl)benzidine (TFMB) in GBL resulted in gelation in the initial reaction stage. The incorporation of a methyl group to TAHQ (M‐TAHQ) allowed polymerization with TFMB in GBL and led to a homogeneous poly(ester imide) (PEsI) precursor solution with a short pot life of 3 days, whereas a simple copolymerization approach using bulky/flexible comonomers to TAHQ/TFMB was less effective. PEsI precursors (PEsAAs) were prepared from TFMB, M‐TAHQ and a minor fraction of 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride (6FDA) or a fluorene‐containing tetracarboxylic dianhydride. These PEsAA systems showed drastically improved GBL solution stability. In particular, the M‐TAHQ(80);6FDA(20)/TFMB copolymer system provided a PEsAA film with a very high light transmittance at 365 nm (>70%). A photosensitive film composed of this matrix resin and diazonaphthoquinone provided a clear positive‐tone pattern by development in a 2.38 wt% tetramethylammonium hydroxide aqueous solution at room temperature with a high dissolution contrast. The thermally cured PEsI film achieved a very high tensile modulus (>5 GPa) as the present target with other desirable properties, i.e. sufficient film flexibility, a relatively low coefficient of thermal expansion, a high T_g and low water absorption. The present materials can be promising candidates as novel buffer coat films in semiconductor applications. Copyright © 2011 Society of Chemical Industry     

A 250-Mb/s/pin, 1-Gb double-data-rate SDRAM with a bidirectionaldelay and an interbank shared redundancy scheme

This paper describes three circuit technologies indispensable for high-bandwidth multibank DRAM's. (1) A clock generator based on a bidirectional delay (BDD) eliminates the output skew. The BDD measures the cycle time as the quantity charged or discharged of an analog quantity, and replicates it in the next cycle. This achieves a 0.18-mm ², two-cycle-lock clock generator operating from 25 to 167 MHz with a 30-ps resolution. (2) A quad-coupled receiver eliminates the internal skew caused by the difference between a rise input and a fall input by 40%. (3) An interbank shared redundancy scheme (ISR) with a variable unit redundancy (VUR) efficiently increases yield in multibank DRAM's. The ISR allows redundancy match circuits to be shared with two or more banks. The VUR allows the number of units replaced to be variable. These circuit technologies achieved a 250-Mb/s/pin, 8-bank, 1-Gb double-data-rate synchronous DRAM