Hepatotoxin (microcystin) and neurotoxin (anatoxin-a) contained in natural blooms and strains of cyanobacteria from Japanese freshwaters

Amounts of hepatotoxic microcystin and neurotoxic anatoxin-a were estimated in natural blooms and strains of cyanobacteria from freshwaters in Japan. A simultaneous analysis method of anatoxin-a and microcystin was applied to natural bloom samples, which has been dominated by several species and the strains of cyanobacteria which produced simultaneously both toxins. The natural blooms examined in the present study were mainly composed of Anabaena and Oscillatoria, but most also contained Microcystis and other cyanobacteria. Only one sample was almost unialgal, Anabaena spiroides, collected from Lake Sagami. The toxins in 14 samples collected from nine different natural blooms during 1988-1992 were identified as microcystins-RR, -YR, and -LR; desmethyl-7-microcystin-LR (7-DMLR); and anatoxin-a. Microcystins were the main toxins contained in these natural blooms, with anatoxin-a not being detected or of very little quantity. 7-DMLR was detected in samples only from Lake Kasumigaura. Five strains of Anabaena isolated from waters in Japan produced a small amount of anatoxin-a, but no microcystins. One half of the strains of Microcystis produced microcystins and/or anatoxin-a. This is the first study showing Microcystis producing both anatoxin-a and microcystins.     

YM-32890 A and B, new types of macrolide antibiotics produced by Cytophaga sp

Two new types of macrolide antibiotics, YM-32890 A and B, have been isolated from the fermentation broth of cytophaga sp. YL-02905S. In this paper, the taxonomy of the producing strain, fermentation, isolation, structure elucidation, and biological activity of the antibiotics are reported. YM-32890 A inhibits the growth of staphylococci including a macrolide-resistant strain, but shows no antimicrobial activity against other Gram-positive, Gram-negative bacteria and yeast.     

Time-dependent deformation in an enhanced SiC/SiC composite

Time-dependent deformation in an enhanced SiC/SiC composite has been studied under constant load at high temperatures of 1200 °C, 1300 °C, and 1400 °C. Creep damage evolution was evaluated by a Young’s-modulus change of partial unloading and microscopic observation. The addition of the glassy phase in the matrix is very effective for protecting the composite from oxidation. The transient creep is dominant in creep life at all the temperatures. An empirical equation is proposed to describe creep behavior of the composite. It is found that creep activation energy increases with creep time at stresses lower than matrix cracking stress, but the activation energy remains constant at stresses higher than the matrix cracking stress. The creep strain rate of the composite is considered to be controlled by creep of fibers based on examining the time, strain, stress, and temperature dependencies of creep strain rates.     

Radiation tolerance for the SMASH-series front-end chips for a silicon micro-strip detector

The radiation tolerance for prototype front-end chips designed for a silicon micro-strip detector was examined with a ⁶⁰Co irradiation source to establish an allowable range of the radiation dose. The irradiated front-end chips were SMA²SH-64A, a 64-channel preamplifier array; SMA²SH-1, a single-channel preamplifier circuit with a comparator; and Control-C, a digital-control chip for the preamplifiers.     

A 286 mm2 256 Mb DRAM with ×32 both-ends DQ

This paper describes a 256 Mb DRAM chip architecture which provides up to ×32 wide organization. In order to minimize the die size, three new techniques: an exchangeable hierarchical data line structure, an irregular sense amp layout, and a split address bus with local redrive scheme in the both-ends DQ were introduced. A chip has been developed based on the architecture with 0.25 μm CMOS technology. The chip measures 13.25 mm×21.55 mm, which is the smallest 256 Mb DRAM ever reported. A row address strobe (RAS) access time of 26 ns was obtained under 2.8 V power supply and 85°C. In addition, a 100 MHz×32 page mode operation, namely 400 M byte/s data rate, in the standard extended data output (EDO) cycle has been successfully demonstrated     

Osteoclastic features of multinucleated giant cells responding to synthetic hydroxyapatite implanted in rat jaw bone.

Multinucleated giant cells (MGCs) that responded to synthetic hydroxyapatite (HAP) implanted in rat mandibles were studied with electron microscopy. HAP used in this study sintered at 200 degrees C (HAP200) and at 125 degrees C (HAP1250) after the synthesis by a wet method. One to three weeks after the intraosseous implantation of HAP, MGCs responding to HAP200 had not only well-developed ruffled border and the clear zone but well-developed perinuclear Golgi complex, many mitochondria and vesicles in their cytoplasms. MGCs responding to HAP1250 had the clear zone, but not the ruffled border although they showed similar cytoplasmic features to those of MGCs responding to HAP200. They merely extended short slender cytoplasmic processes to HAP1250. These results suggest that although osteoclast-like MGCs respond to HAP implanted in the bone, the development of the ruffled border-clear zone system depends on physicochemical properties of HAP.     

Effective thermal conductivity of compressed woods

Compression is one solution to improve the strength of softwoods. The effective thermal conductivities of compressed Japanese cedars (cryptomeria japonica), which were compressed in the radial direction of the wood, were measured. Both the effective thermal conductivities in the tangential and fiber directions increase proportionally to the density increment due to the compression. However, the thermal conductivity in the radial direction (compression direction) increases slightly with the density increment. Numerical computations were conducted to explain the characteristics of thermal conductivity in the radial direction by using a microscopic heat conduction model for the compressed wood. The numerical results were compared with the measured values. And the physical mechanism of the heat conduction in the compressed woods is discussed.     

Development of a single loop EPR test method and its relation to grain boundary microchemistry for alloy 600

A single loop electrochemical potentiokinetic reactivation test method has been developed for alloy 600 that produces good passivation on all the surfaces, good etching during the reactivation scan and no appreciable pitting. It is able to quantify and discriminate between samples with a wide range of degree of sensitization. The Pa value correlates well with the minimum level of chromium in the depletion regions at the grain boundaries. It has been shown that the width of the attacked regions is much larger than the width of chromium depletion regions and it does not show any direct correlation with either depth or width or with a volume parameter of chromium depletion regions. It has been shown that the chromium carbides are not attacked during the test and that the intragranular regions attacked during the test are the sites of chromium carbides in the grain matrix. A modified Pa parameter is shown to be sensitive down to 7.5 wt% chromium in the depletion regions and indicates that the intragranular carbides have shallower depletion profiles than those at grain boundaries. Comparison of the results of the single loop and the double loop tests showed a good correlation.     

Recovery retardation in equal channel angular pressed Al–Zr alloy during friction stir welding

The effect of Zr on reduction of hardness and microstructure in an FS weld of equal channel angular-pressed Al alloy was investigated. Zr addition to Al suppressed dynamic recovery in the thermomechanically affected zone and enabled retention of the high hardness of the ECA-pressed material throughout the weld.