The Function of Sialidase Revealed by Sialidase Activity Imaging Probe

Sialidase cleaves sialic acid residues from glycans such as glycoproteins and glycolipids. In the brain, desorption of the sialic acid by sialidase is essential for synaptic plasticity, learning and memory and synaptic transmission. BTP3-Neu5Ac has been developed for sensitive imaging of sialidase enzyme activity in mammalian tissues. Sialidase activity in the rat hippocampus detected with BTP3-Neu5Ac increases rapidly by neuronal depolarization. It is presumed that an increased sialidase activity in conjunction with neural excitation is involved in the formation of the neural circuit for memory. Since sialidase inhibits the exocytosis of the excitatory neurotransmitter glutamate, the increased sialidase activity by neural excitation might play a role in the negative feedback mechanism against the glutamate release. Mammalian tissues other than the brain have also been stained with BTP3-Neu5Ac. On the basis of information on the sialidase activity imaging in the pancreas, it was found that sialidase inhibitor can be used as an anti-diabetic drug that can avoid hypoglycemia, a serious side effect of insulin secretagogues. In this review, we discuss the role of sialidase in the brain as well as in the pancreas and skin, as revealed by using a sialidase activity imaging probe. We also present the detection of influenza virus with BTP3-Neu5Ac and modification of BTP3-Neu5Ac.     

Analysis of the IgE-epitope of Der f 2, a major mite allergen, by in vitro mutagenesis

Der f 2 is a major mite allergen composed of 129 amino acid residues. To determine the major epitopes on Der f 2 recognized by human IgE antibodies, artificial mutations were introduced to Der f 2 protein. The IgE-binding activity of Der f 2 was significantly decreased by deletion of 10 amino acids at the N-terminus or nine amino acids at the C-terminus. Site-directed mutagenesis with a single amino acid replacement by Ala or Leu in both N- and C-terminal regions as well as a central portion was performed to generate 42 single-site mutations. Amino acid replacement around a disulfide bond of Cys8-Cys119 caused a marked decrease in IgE-binding activity. Furthermore, a distinct decrease in IgE-binding was also caused by Ala-substitution close to a disulfide bond of Cys73-Cys78 and by mutations of a few charged residues. From these results, it was concluded that the two disulfide-forming regions of Der f 2 and several charged residues are important for forming major epitope structures recognized by human IgE antibodies.     

Changes of biochemical markers during fracture healing

Clinical diagnosis of canine nasal mite (Pneumonyssoides caninum) infection is difficult due to the mite's location in the caudal nasal cavity and frontal sinuses. The current study was performed to evaluate the efficacy of milbemycin oxime in treating dogs with nasal mite infection. A prospective open uncontrolled study included 20 dogs with case histories indicating possible nasal mite infection. Inclusion criteria consisted of either nasal mites being demonstrated (group 1, four dogs), or suspicious clinical signs with no other apparent causes, combined with eosinophilia (group 2, 16 dogs). Milbemycin oxime 1 mg/kg was given orally three times at 10-day intervals. In 17 (85 per cent) dogs, clinical signs resolved completely following milbemycin therapy; within 10 days of the first treatment in 13 cases (group 1, four dogs; group 2, nine dogs) and within 14 days in four cases. In the remaining three dogs clinical signs persisted but were diminished.     

Quantitative determination of corrosion products and adsorbed water on copper in humid air containing SO2 by IR-RAS measurements

The time dependency of the amounts of corrosion products and co-existing adsorbed water on copper in humid air containing SO₂ was estimated from a series of in situ time-resolved IR-RAS spectra on the basis of the relations between the band intensities and the mass changes of the corrosion products, which were determined by simultaneous measurement of IR-RAS and QCM. The amounts of both corrosion products increased slowly at the initial stage and later increased rapidly. Although the relative humidity was kept constant, the amount of adsorbed water increased nearly the same behavior as that of corrosion products in the stage of relatively small amounts of corrosion products and later increased rapidly when the amounts of corrosion products increased. In humid air without SO₂, sulfite gradually decomposed and some of it changed into sulfate.     

Data Center as a Key Player of a District Electric Power and Heat Network System： A Comparison in Urban and Suburb Regions

A DC （data center） demands air-conditioning power as large as the 1/3-1/2 of total electricity consumption. Thus, energy saving of cooling power of DC yields considerable effect on both economic and environmental views. PV （Photovoltaic） and absorption refrigerator with CGS （cogeneration systems） or gas boiler are possible power saving options. The waste warm air from DC would be utilized for greenhouse heating when DC and greenhouse locate near in the suburbs. In this study, the authors develop an energy network model to assess the potential contribution of DC as a major electric power and chilled air consumer as well as the warm air supplier in a district to the energy efficiency improvement. The evaporation heat of LNG （liquefied natural gas） utilization is also considered as well as PV, CGS. This model is applied to the cases of the urban area in Tokyo which involves athletic center, shops and hospital and the suburbs including greenhouse and then compared.     

A design of high optical efficiency wedge type light guide plate adopting twin inclined cylindrical surface

We propose wedge type light guide plate (LGP) adopting twin inclined cylindrical surfaces (TICS) at the incident part of a LGP. It has higher optical efficiency than conventional wedge type LGP. In dimension of LGP which the thickness of incident part is 1.5 mm and that of luminance part is 0.7 mm, the optical efficiency of wedge type LGP adopting TICS is expected to be 96% in comparison with a normal flat LGP. In addition, there is an advantage to reduce the non‐uniformity of vicinity of light emitted diodes (LEDs) by TICS reflecting light laterally. However, it is necessary that the LED centers are aligned with the intersections of TICS. The misalignment of LED causes non‐uniformity of optical profile that is slightly larger than a normal LGP.     

Creation of the active site for methanol synthesis on a Cu/SiO2 catalyst

The effect of ZnO/SiO₂ in a physical mixture of Cu/SiO₂ and ZnO/SiO₂ on methanol synthesis from CO₂ and H₂ was studied to clarify the role of ZnO in Cu/ZnO-based catalysts. An active Cu/SiO₂ was prepared by the following procedure: the Cu/SiO₂ and ZnO/SiO₂ catalysts with a different SiO₂ particle size were mixed and reduced with H₂ at 523-723 K, and the Cu/SiO₂ was then separated from the mixture using a sieve. The methanol synthesis activity of the Cu/SiO₂ catalyst increased with the reduction temperature and was in fairly good agreement with that previously obtained for the physical mixture of Cu/SiO₂ and ZnO/SiO₂. These results indicated that the active site for methanol synthesis was created on the Cu/SiO₂ upon reduction of the physical mixture with H₂. It was also found that ZnO itself had no promotional effect on the methanol synthesis activity except for the role of ZnO to create the active site. The active site created on the Cu/SiO₂ catalyst was found not to promote the formation of formate from CO₂ and H₂ on the Cu surface based on in situ FT-IR measurements. A special formate species unstable at 523 K with an OCO asymmetric peak at ~1585 cm^-1 was considered to be adsorbed on the active site. This revised version was published online in July 2006 with corrections to the Cover Date.     

Structural phase transitions of methane+ethane mixed-gas hydrate induced by 1,1-dimethylcyclohexane

Methane+ethane+1,1-dimethylcyclohexane+water system was investigated by using Raman spectroscopy and isothermal phase equilibrium measurements under four-phase (gas+aqueous+large guest species+hydrate phases) equilibrium conditions at 288.15 K. The results suggest that three kinds of hydrate structures emerge at 288.15 K in the methane+ethane+1,1-dimethylcyclohexane+water system. The hydrate structure for this system changed from structure-H to structure-I via structure-II with increase in the mole ratio of ethane to methane.