The Function of Sialidase Revealed by Sialidase Activity Imaging Probe

Sialidase cleaves sialic acid residues from glycans such as glycoproteins and glycolipids. In the brain, desorption of the sialic acid by sialidase is essential for synaptic plasticity, learning and memory and synaptic transmission. BTP3-Neu5Ac has been developed for sensitive imaging of sialidase enzyme activity in mammalian tissues. Sialidase activity in the rat hippocampus detected with BTP3-Neu5Ac increases rapidly by neuronal depolarization. It is presumed that an increased sialidase activity in conjunction with neural excitation is involved in the formation of the neural circuit for memory. Since sialidase inhibits the exocytosis of the excitatory neurotransmitter glutamate, the increased sialidase activity by neural excitation might play a role in the negative feedback mechanism against the glutamate release. Mammalian tissues other than the brain have also been stained with BTP3-Neu5Ac. On the basis of information on the sialidase activity imaging in the pancreas, it was found that sialidase inhibitor can be used as an anti-diabetic drug that can avoid hypoglycemia, a serious side effect of insulin secretagogues. In this review, we discuss the role of sialidase in the brain as well as in the pancreas and skin, as revealed by using a sialidase activity imaging probe. We also present the detection of influenza virus with BTP3-Neu5Ac and modification of BTP3-Neu5Ac.     

Molecular Targeted Therapy for the Bone Loss Secondary to Pyogenic Spondylodiscitis Using Medications for Osteoporosis: A Literature Review

Pyogenic spondylodiscitis can cause severe osteolytic and destructive lesions in the spine. Elderly or immunocompromised individuals are particularly susceptible to infectious diseases; specifically, infections in the spine can impair the ability of the spine to support the trunk, causing patients to be bedridden, which can also severely affect the physical condition of patients. Although treatments for osteoporosis have been well studied, treatments for bone loss secondary to infection remain to be elucidated because they have pathological manifestations that are similar to but distinct from those of osteoporosis. Recently, we encountered a patient with severely osteolytic pyogenic spondylodiscitis who was treated with romosozumab and exhibited enhanced bone formation. Romosozumab stimulated canonical Wnt/β-catenin signaling, causing robust bone formation and the inhibition of bone resorption, which exceeded the bone loss secondary to infection. Bone loss due to infections involves the suppression of osteoblastogenesis by osteoblast apoptosis, which is induced by the nuclear factor-κB and mitogen-activated protein kinase pathways, and osteoclastogenesis with the receptor activator of the nuclear factor-κB ligand-receptor combination and subsequent activation of the nuclear factor of activated T cells cytoplasmic 1 and c-Fos. In this study, we review and discuss the molecular mechanisms of bone loss secondary to infection and analyze the efficacy of the medications for osteoporosis, focusing on romosozumab, teriparatide, denosumab, and bisphosphonates, in treating this pathological condition.     

Preparation of micrometer‐sized,monodisperse, magnetic polymer particles

Micrometer‐sized, monodisperse, magnetic composite particles were prepared by heating micrometer‐sized, monodisperse, hollow polystyrene/polydivinylbenzene composite polymer particles at 200°C for 4 h (particles had been dipped in pentacarbonyliron) and then washed in 12 N HCl and water. The hollow polymer particles were produced by seeded polymerization by the dynamic swelling method that was proposed by authors. The magnetic composite particles contained Fe₃O₄, the content of which was 49% based on total weight, and were attracted easily in water by a 1650 G magnet. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 428–433, 2003     

A 1.5-V full-swing BiCMOS logic circuit

A BiCMOS logic circuit applicable to sub-2-V digital circuits has been developed. A transiently saturated full-swing BiCMOS (TS-FS-BiCMOS) logic circuit operates twice as fast as CMOS at 1.5-V supply. A newly developed transient-saturation technique, with which bipolar transistors saturate only during switching periods, is the key to sub-2-V operation because a high-speed full-swing operation is achieved to remove the voltage loss due to the base-emitter turn-on voltage. Both small load dependence and small fan-in dependence of gate delay time are attained with this technique. A two-input gate fabricated with 0.3-μm BiCMOS technology verifies the performance advantage of TS-FS-BiCMOS over other BiCMOS circuits and CMOS at sub 2-V supply     

Automated low-power technique exploiting multiple supply voltagesapplied to a media processor

This paper describes an automated design technique to reduce power by making use of two supply voltages. The technique consists of structure synthesis, placement, and routing. The structure synthesizer clusters the gates off the critical paths so as to supply the reduced voltage to save power. The placement and routing tool assigns either the reduced voltage or the unreduced one to each row so as to minimize the area overhead. The reduced supply, voltage is also exploited in a clock tree to reduce power. Combining these techniques together, we applied it to a media processor chip. The combined technique reduced the power by 47% in random-logic modules and by 73% in the clock tree, while keeping the performance     

A case of severe Becker muscular dystrophy diagnosed in early childhood--correlation between clinical severity and dystrophin testing

Cutaneous lesions caused by M. ulcerans were shown to bear only a superficial resemblance to those produced by certain spider species. M. ulcerans was not found in either the venoms or the midguts of several Australian spiders, and deliberate contamination by inoculation of the fangs and digestive system of the wolf spider, Lycosa godeffroyi, did not result in permanent colonization. M. ulcerans was successfully introduced into the skin of mice through a small trauma site similar to that caused by a spider bite. However, because M. ulcerans was shown to survive on exposed surfaces for only a short period, a successful inoculation is likely only if the skin is contaminated with this organism after, or at the same time as, the skin suffers damage. The claim by other workers that M. ulcerans produces cutaneous ulcers by release of an exotoxin could not be confirmed. The authors conclude that M. ulcerans is not involved in most cases of necrotic arachnidism and hence there is no justification for prescribing anti-mycobacterial antibiotics to resolve alleged spider bite lesions unless the presence of M. ulcerans has been demonstrated by appropriate laboratory tests.     

Crystal orientation of β-phase isotactic polypropylene induced by magnetic orientation of N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide

Melt crystallization of isotactic polypropylene (iPP), containing crystallites of N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide (DCNDCA) as a nucleating agent of the the β-phase iPP crystal, is carried out under a magnetic field (6 T) to obtain the alignment of the iPP crystal induced by magnetic alignment of DCNDCA. In a previous paper, DCNDCA was reported to undergo magnetic alignment in a liquid suspension. The obtained iPP sample exhibits alignment of the β-phase crystal with the c-axis aligned perpendicular to the magnetic field. The comparison of this alignment of iPP with the reported magnetic alignment of DCNDCA indicates that the β-phase crystal grows epitaxially on the DCNDCA crystal. The (330)_β plane of the iPP crystal lies on the bc-plane of the DCNDCA crystal in which the direction of the c-axis of the iPP coincides with the direction of the b-axis of the DCNDCA crystal.     

Development of a dual‐lamp projector with higher brightness

Stationary projectors mainly used in system applications have recently gained a wider application range, including general presentations in halls and large conference rooms and being used, for example, in digital signage and for monitoring purposes. Consequently, they are required to meet new market demands for durability, reliability, and flexibility in installation in addition to their conventional basic performance such as especially high brightness. To achieve especially high brightness, a new optical system with two lamps is proposed; the profile of the cover glass that prevents the glass from scattering is made aspherical, the profile of the beam‐combining mirror is improved with its position optimized, and the size of the incident plane of the integrator rod is made larger (1.1 times). These measures resulted in an optical system of an even higher efficiency with 7000 lm, which is the highest in its class (according to a June 2010 investigation). Also, the arrangement of two parallel lamps completely eliminated the effect of heat passing from one lamp to the other, which helped secure durability, reliability, and flexibility in installation. Furthermore, the combined use of the unique non‐telecentric optical system, adopted from the conventional single‐lamp model, helps maintain the class‐highest contrast ratio.^1,2     

Estimation procedure for the Weibull parameters used in the local approach

The local approach was recently proposed by Beremin and Mudry for evaluating the statistical behaviour of toughness results of materials. This approach introduces a stress parameter _w , termed the Weibull stress, as a measure of the fracture resistance of materials instead of the conventional toughness parameters such as K _c, _c and J _cl (critical stress intensity factor, CTOD and J-integral, respectively). The Weibull stress _w obeys the Weibull distribution with the two parameters m and _u (the shape and the scale parameter, respectively). The first parameter m is normally estimated to be 22 irrespective of the kind of material. In this paper a procedure for the determination of the Weibull parameters m and _u is developed. This procedure consists of the determination of the plastic zone ahead of the crack tip, from which cleavage fracture originates, and of the maximum likelihood estimation of the parameters m and _u based on the stress distribution in the plastic zone. Calculations using this procedure confirm that the distribution of the Weibull stress _w is a material property independent of specimen thickness, and in particular that the shape parameter m depends on the material, e.g. m12 for a German reactor pressure vessel steel (20 Mn Mo Ni 5 5). Using these parameters for the distribution of the Weibull stress the size effect in fracture toughness values is predicted and an improved agreement between theory and experiments is obtained compared to the Weakest Link model.