The advantages of using impact resonance test in dynamic modulus master curve construction through the abbreviated test protocol

Asphalt concrete behavior is heavily dependent on temperature and loading rate. Hence, the material is typically tested at a range of temperatures and loading frequencies to capture its properties. Results are then used to develop a master curve exhibiting material behavior at the full spectrum of loading frequencies. An abbreviated testing protocol, under AASHTO PP 61-13, proposes a practical approach for development of this master curve. In this practice, the low temperature asymptote of the master curve is dominated by the limiting maximum modulus estimated through the Hirsch model. In this study, the dynamic modulus (DM) testing coupled with impact resonance (IR) test was used to evaluate the effect of this limiting maximum modulus on construction of the asphalt concrete master curve. Three different asphalt mixtures prepared with the same gradation and binder content, but different grades of stiffness were tested. The DM testing was performed at multiple temperatures and loading frequencies. The IR tests were conducted on the same specimens at the same temperatures. Two sigmoid functions (MEPDG and Richards models), and three shift factors (Arrhenius, Williams–Landel–Ferry, and polynomial) were utilized in the analysis. Richards sigmoid function coupled with polynomial shift factor provided the best fitting accuracy to the measured data. It was observed that the limiting maximum modulus obtained from experimental data was underpredicted by that obtained from the Hirsch model. The results indicated potential benefits of the IR test as a complementary testing tool to the abbreviated DM testing protocol to reliably characterize asphalt concrete.     

Prediction of deflection of reinforced concrete shear walls

Reinforced concrete shear walls are used in tall buildings for efficiently resisting lateral loads. Due to the low tensile strength of concrete, reinforced concrete shear walls tend to behave in a nonlinear manner with a significant reduction in stiffness, even under service loads. To accurately assess the lateral deflection of shear walls, the prediction of flexural and shear stiffness of these members after cracking becomes important. In the present study, an iterative analytical procedure which considers the cracking in the reinforced concrete shear walls has been presented. The effect of concrete cracking on the stiffness and deflection of shear walls have also been investigated by the developed computer program based on the iterative procedure. In the program, the variation of the flexural stiffness of a cracked member has been evaluated by ACI and probability-based effective stiffness model. In the analysis, shear deformation which can be large and significant after development of cracks is also taken into account and the variation of shear stiffness in the cracked regions of members has been considered by using effective shear stiffness model available in the literature. Verification of the proposed procedure has been confirmed from series of reinforced concrete shear wall tests available in the literature. Comparison between the analytical and experimental results shows that the proposed analytical procedure can provide an accurate and efficient prediction of both the deflection and flexural stiffness reduction of shear walls with different height to width ratio and vertical load. The results of the analytical procedure also indicate that the percentage of shear deflection in the total deflection increases with decreasing height to width ratio of the shear wall.     

An integrated approach to concept evaluation in a new product development

A new product development (NPD) process can be thought as a comprehensive process in which the design is progressively detailed through a series of phases. At the end of each phase a design review is held to approve the design and release or not it to the next level. As one of these phases, concept selection aiming to select the most appropriate concept for further development, is conducted earlier in the process. As the further development progresses on a selected concept, it becomes more difficult to make design changes in terms of cost and schedule dimensions, and therefore, selecting the best concept among a set of available alternatives has been an important issue for companies. On the other hand, in the presence of many alternatives and selection criteria, the selection problem becomes a multiple-criteria decision making concept selection problem. To solve this problem, in this work, an integrated approach bringing two popular methods together: the modified technique for order preference by similarity to ideal solution (TOPSIS) and the analytical network process (ANP). The ANP method is used to determine the relative weights of a set of quantitative and qualitative evaluation criteria, as the modified TOPSIS method utilized to rank competing concept alternatives. In addition, a real example is presented to demonstrate the effectiveness and applicability of the proposed approach for potential practitioners and readers.     

Enhanced multiclass SVM with thresholding fusion for speech-based emotion classification

As an essential approach to understanding human interactions, emotion classification is a vital component of behavioral studies as well as being important in the design of context-aware systems. Recent studies have shown that speech contains rich information about emotion, and numerous speech-based emotion classification methods have been proposed. However, the classification performance is still short of what is desired for the algorithms to be used in real systems. We present an emotion classification system using several one-against-all support vector machines with a thresholding fusion mechanism to combine the individual outputs, which provides the functionality to effectively increase the emotion classification accuracy at the expense of rejecting some samples as unclassified. Results show that the proposed system outperforms three state-of-the-art methods and that the thresholding fusion mechanism can effectively improve the emotion classification, which is important for applications that require very high accuracy but do not require that all samples be classified. We evaluate the system performance for several challenging scenarios including speaker-independent tests, tests on noisy speech signals, and tests using non-professional acted recordings, in order to demonstrate the performance of the system and the effectiveness of the thresholding fusion mechanism in real scenarios.     

Visualization of fibrous and thread-like data

Thread-like structures are becoming more common in modern volumetric data sets as our ability to image vascular and neural tissue at higher resolutions improves. The thread-like structures of neurons and micro-vessels pose a unique problem in visualization since they tend to be densely packed in small volumes of tissue. This makes it difficult for an observer to interpret useful patterns from the data or trace individual fibers. In this paper we describe several methods for dealing with large amounts of thread-like data, such as data sets collected using Knife-Edge Scanning Microscopy (KESM) and Serial Block-Face Scanning Electron Microscopy (SBF-SEM). These methods allow us to collect volumetric data from embedded samples of whole-brain tissue. The neuronal and microvascular data that we acquire consists of thin, branching structures extending over very large regions. Traditional visualization schemes are not sufficient to make sense of the large, dense, complex structures encountered. In this paper, we address three methods to allow a user to explore a fiber network effectively. We describe interactive techniques for rendering large sets of neurons using self-orienting surfaces implemented on the GPU. We also present techniques for rendering fiber networks in a way that provides useful information about flow and orientation. Third, a global illumination framework is used to create high-quality visualizations that emphasize the underlying fiber structure. Implementation details, performance, and advantages and disadvantages of each approach are discussed.     

Assessment of Water Quality Management in Turkey

Abstract

There has been a noticeable increase in the amount of pollution in water resources in Turkey in recent years. Negative environmental developments, such as industrialization, increasing urbanization, improper pesticide and fertilizer applications in agricultural lands, and the drainage of domestic and industrial wastewater into water resources without any waste treatment applications, cause rapid pollution of both surface and groundwater resources. Therefore, it is necessary to allocate more attention to water resources monitoring and evaluation studies to prevent the pollution of water resources, and to reclaim these resources.     

Vibration analysis of rolling element bearings with various defects under the action of an unbalanced force

In this paper, a method based on the finite element vibration analysis is presented for defect detection in rolling element bearings with single or multiple defects on different components of the bearing structure using the time and frequency domain parameters. A dynamic loading model is proposed in order to create the nodal excitation functions used in the finite element vibration analysis as external loading. A computer code written in Visual Basic programming language with a graphical user interface is developed to create the nodal excitations for different cases including the outer ring, inner ring or rolling element defects. Forced vibration analysis of a bearing structure is performed using the commercial finite element package I-DEAS under the action of an unbalanced force transferred to the structure via a ball bearing. Time and frequency domain parameters such as rms, crest factor, kurtosis and band energy ratio for the frequency spectrum of the enveloped signals are used to analyse the effect of the defect location and the number of defects on the time and frequency domain parameters. The role of the receiving point for vibration measurements is also investigated. The vibration data for various defect cases including the housing structure effect can be obtained using the finite element vibration analysis in order to develop an optimum monitoring method in condition monitoring studies.     

PSW statistical LSB image steganalysis

Multimedia Tools and Applications - Steganography is the art and science of producing covert communications by concealing secret messages in apparently innocent media, while steganalysis is the art...     

Capacitor Applications of Nanocomposite Films for Poly(3,4-ethylenedioxythiophene-co-pyrrole)/Multi-Walled Carbon Nanotubes and Poly(3,4-ethylenedioxythiophene-co-pyrrole)/Copper Oxide

Polypyrrole/multi-walled carbon nanotube, poly(3,4-ethylenedioxythiophene)/multi-walled carbon nanotube and their nanocomposites P(EDOT-co-Py)/multi-walled carbon nanotube and P(EDOT-co-Py)/copper (II) oxide, (CuO) in the initial feed ratio of [EDOT]₀/[Py]₀ = 1/5 were electrosynthesized on glassy carbon electrode by cyclic voltammetric method. Their characterizations were performed by cyclic voltammetric, Fourier transform infrared-attenuated total reflectance, scanning electron microscopy, energy dispersion X-ray analysis, and electrochemical impedance spectroscopy. To the best of authors’ knowledge, the first report on polypyrrole/multi-walled carbon nanotube, PEDOT/multi-walled carbon nanotube, P(EDOT-co-Py)/multi-walled carbon nanotube and P(EDOT-co-Py)/CuO nanocomposite films were comparatively examined in 0.1 M NaClO₄/CH₃CN and in 0.1 M sodium dodecyl sulfate solutions. The highest specific capacitance for PEDOT/multi-walled carbon nanotube and polypyrrole/multi-walled carbon nanotube composite films were obtained as C_sp = 306 mF × cm^?2 for 3% multi-walled carbon nanotube and C_sp = 804 mF × cm^?2 for 1% multi-walled carbon nanotube, respectively. The highest specific capacitances were obtained as C_sp = 27.40 mF × cm^?2 and C_sp = 26.90 mF × cm^?2 for P(EDOT-co-Py)/multi-walled carbon nanotube includes the wt percent of 1% multi-walled carbon nanotube and P(EDOT-co-Py)/CuO includes the wt percent of 3% CuO, respectively. The C_sp of P(EDOT-co-Py)/CNT composite films were calculated as 9.43 and 11.49 mF × cm^?2 for 3 and 5% multi-walled carbon nanotube, respectively. In addition, The EIS results were simulated with the equivalent circuit model of R_s(C_dl1(R₁(QR₂)))(C_dl2R₃).