Hydrogen annealing effect on DC and low-frequency noise characteristics in CMOS FinFETs

The hydrogen annealing process has been used to improve surface roughness of the Si-fin in CMOS FinFETs for the first time. Hydrogen annealing was performed after Si-fin etch and before gate oxidation. As a result, increased saturation current with a lowered threshold voltage and a decreased low-frequency noise level over the entire range of drain current have been attained. The low-frequency noise characteristics indicate that the oxide trap density is reduced by a factor of 3 due to annealing. These results suggest that hydrogen annealing is very effective for improving device performance and for attaining a high-quality surface of the etched Si-fin.     

Existence of Carathe/spl acute/odory solutions in nonlinear systems with discontinuous switching feedback controllers

In this note, we consider the existence of a Carathe/spl acute/odory solution in a single-input-single-output nonlinear system with a discontinuous switching feedback controller. The main contribution is to show that if the nonlinear system can be transformed into a global normal form, then we can specify the value of the discontinuous switching feedback controller on the switching hypersurface so that the closed-loop system has a Carathe/spl acute/odory solution.     

Purification and partial characterization of 76 kDa transglutaminase in the egg envelope (chorion) of rainbow trout, Oncorhynchus mykiss

Transglutaminase (TGase), responsible for crosslinking between proteins, is known to be localized exclusively in the egg envelope (chorion) of rainbow trout, Oncorhynchus mykiss, and probably participates in the post-fertilization chorion hardening. We purified the TGase from unfertilized egg chorions by sequential chromatography using SP-Sepharose, Q-Sepharose, and TSK-gel G3000SWXL columns. The purified enzyme was a monomeric protein having the molecular mass of 76 kDa. It promoted incorporation of monodansyl-cadaverine into chorion protein and catalyzed the polymerization of chorion subunit proteins. The effect of various reagents suggested that the chorion TGase is a Ca2+-dependent SH-enzyme similar to the well-characterized TGases of various animals. The highest activity was observed at pH 6.0. The amines examined in the present study inhibited the TGase activity of the purified enzyme. However, they did not necessarily cause effective inhibition of its activity. These properties of the chorion TGase were essentially consistent with our previous observations on polymerization of chorion proteins, resulting in chorion hardening. We compared the amino acid composition of the purified TGase with those of the previously characterized TGases of fishes, such as chum salmon and red sea bream. The results suggest that the chorion 76 kDa TGase is not homologous with those liver TGases in terms of amino acid composition.     

ERCP and CT findings of ectopic drainage of the common bile duct into the duodenal bulb

OBJECTIVE: The purpose of this study was to evaluate ERCP and CT findings of ectopic drainage of the common bile duct into the duodenal bulb. CONCLUSION: Although rare, the diagnosis of ectopic drainage of the common bile duct into the duodenal bulb is important to prevent inadvertent damage during biliary tract or gastric surgery and to clarify the cause of chronic peptic ulcers.     

Substrate-induced conformational change in a trimeric ornithine transcarbamoylase

The crystal structure of Escherichia coli ornithine transcarbamoylase (OTCase, EC 2.1.3.3) complexed with the bisubstrate analog N-(phosphonacetyl)-L-ornithine (PALO) has been determined at 2.8-A resolution. This research on the structure of a transcarbamoylase catalytic trimer with a substrate analog bound provides new insights into the linkages between substrate binding, protein-protein interactions, and conformational change. The structure was solved by molecular replacement with the Pseudomonas aeruginosa catabolic OTCase catalytic trimer (Villeret, V., Tricot, C., Stalon, V. & Dideberg, O. (1995) Proc. Natl. Acad. Sci. USA 92, 10762-10766; Protein Data Bank reference pdb 1otc) as the model and refined to a crystallographic R value of 21.3%. Each polypeptide chain folds into two domains, a carbamoyl phosphate binding domain and an L-ornithine binding domain. The bound inhibitor interacts with the side chains and/or backbone atoms of Lys-53, Ser-55, Thr-56, Arg-57, Thr-58, Arg-106, His-133, Asn-167, Asp-231, Met-236, Leu-274, Arg-319 as well as Gln-82 and Lys-86 from an adjacent chain. Comparison with the unligated P. aeruginosa catabolic OTCase structure indicates that binding of the substrate analog results in closure of the two domains of each chain. As in E. coli aspartate transcarbamoylase, the 240s loop undergoes the largest conformational change upon substrate binding. The clinical implications for human OTCase deficiency are discussed.     

Compact Dipole Antenna for Terrestrial Digital Multimedia Broadcasting Service

A compact dipole antenna for the terrestrial digital multimedia broadcasting (TDMB) application is presented. The length of the antenna is about 0.06λ at the TDMB resonance frequency of 190 MHz. Miniaturization of the antenna is achieved by using meander structures and lumped elements. The proposed antenna has two resonance frequencies and covers the TDMB band from 174 MHz to 216 MHz in Korea. The antenna has good impedance bandwidth and radiation characteristics for the TDMB. The experimental results of the designed dipole antenna are presented and analyzed.     

Corrosion Condition Evaluation at Muddy Creek Bridge

Corrosion rates were measured at the exposed spots of rebars near three corners of Muddy Creek Bridge located in northern West Virginia using a 3LP device. Also, chloride contents of the concrete samples taken from the vicinity of the spots were analyzed using a wet chemical method that had been developed in this study. The average corrosion rate over the three spots was 4.66 mA/m2, which is in the range of corrosion damage possible in 10–15 years. The average chloride content of the concrete over the three spots was 703 parts per million (ppm), which is well above the threshold limit value of 260 ppm. Although the corrosion rate measurement method using a 3LP device is by manual operation, it is found to be reliable and effective, and, thus, recommended for future studies of this kind of research. The wet chemical method developed in this study is found to be effective.     

Grain size effects on the mechanical properties of some squeeze cast light alloys

Mechanical property-grain size relationships have been examined for squeeze cast Al-4.5% Cu alloy, for an aluminium alloy with a composition corresponding to wrought 7010, and for a magnesium alloy AZ91. The general trend of the results obtained showed that the tensile properties and the fatigue strength improved as grain size decreased and the reverse was found to be the case for the fatigue crack propagation resistance and fracture energy of these castings. However, the results also showed that no simple common relationship existed between grain size and the tensile properties of the different alloys. The results are discussed in respect of their microstructures.     

Mechanical alloying in the Al-Bi alloy system

Mechanical alloying (MA) was carried out to investigate the MA behaviour of the immiscible Al-10, 30 at % Bi alloys. After the MA processing, the Al and Bi were finely and homogeneously alloyed. The Bi crystallite size decreased to 25 nm and 30 nm in the Al-10 at % Bi and Al-30 at % Bi alloys, respectively. By increasing the MA time, the hardness increased up to a value of 80 H _v, which is larger than that obtained from the rule of mixtures. The lattice parameter of Bi decreased by about 0.27%, which shows the formation of a non-equilibrium hcp Bi super-saturated solid solution. The extended solubility of Al in Bi was 1.9% in the Al-30 at % Bi alloy. Due to the extended solubility, depression of the melting temperature of hcp Bi was confirmed in the mechanically alloyed Al-Bi alloys. The maximum depression in the temperature was about 10 K. The measured values corresponded well with those estimated from the extrapolation of the solidus line.