钌基厚膜电阻传导模型初探

介绍钌基厚膜电阻的三种传导模型。三种模型都可以得到较满意的R—V曲线，不足处是链模型得出电阻率和导电相粒子形状及尺寸的关系和实验事实不符；有效介质模型不能反映厚膜电阻形成过程中众多因素的影响；渗透模型很多参数的获得有赖经验公式。渗透模型能反映烧结过程中更多因素的影响，并可解释方阻与导电相粒度及峰值温度的变化关系。     

Memory leak detection in Plumbr

Platforms with automatic memory management, such as the JVM, are usually considered free of memory leaks. However, memory leaks can happen in such environments, as the garbage collector cannot free objects, which are not used by the application anymore, but are still referenced. Such unused objects can eventually fill up the heap and crash the application. Although this problem has been studied extensively, nevertheless, there are still many rooms for improvement in this area. This paper describes the statistical approach for memory leak detection, as an alternative, along with a commercial tool, Plumbr, which is based on the method. The tool is later analyzed with three case studies of real applications and in the process also analyzes strengths and weaknesses of the statistical approach for memory leak detection. Copyright © 2014 John Wiley & Sons, Ltd.     

HFPaC: GPU friendly height field parallel compression

In this paper, we present a novel method for fast lossy or lossless compression and decompression of regular height fields. The method is suitable for SIMD parallel implementation and thus inherently suitable for modern GPU architectures. Lossy compression is achieved by approximating the height field with a set of quadratic Bezier surfaces. In addition, lossless compression is achieved by superimposing the residuals over the lossy approximation. We validated the method’s efficiency through a CUDA implementation of compression and decompression algorithms. The method allows independent decompression of individual data points, as well as progressive decompression. Even in the case of lossy decompression, the decompressed surface is inherently seamless. In comparison with the GPU-oriented state-of-the-art method, the proposed method, combined with a widely available lossless compression method (such as DEFLATE), achieves comparable compression ratios. The method’s efficiency slightly outperforms the state-of-the-art method for very high workloads and considerably for lower workloads.     

NiCo-selenide as a novel catalyst for water oxidation

The design and fabrication of sustainable and efficient electrocatalyst for water splitting are crucial for rechargeable metal-air batteries and regenerative fuel cells. In this report, a highly stable and active NiCo-selenide electrocatalyst was successfully prepared by a facile two-step solvothermal approach. In 0.1 M KOH alkaline electrolyte solution, the novel NiCo-selenide electrocatalyst afforded the current density of 10 mA cm^?2 at a lower overpotential of 393 mV, a smaller Tafel slope of ~89 mV dec^?1 and better stability, compared with NiCo-based oxide and sulfide.     

Operation of a horizontal subsurface flow constructed wetland – Microbial fuel cell treating wastewater under different organic loading rates

The aim of the present work is to determine whether a horizontal subsurface flow constructed wetland treating wastewater could act simultaneously as a microbial fuel cell (MFC). Specifically, and as the main variable under study, different organic loading rates were used, and the response of the system was monitored. The installation consisted of a synthetic domestic wastewater-feeding system and a pilot-scale constructed wetland for wastewater treatment, which also included coupled devices necessary to function as an MFC. The wetland worked under continuous operation for 180 d, treating three types of synthetic wastewater with increasing organic loading rates: 13.9 g COD m⁻² d⁻¹, 31.1 g COD m⁻² d⁻¹, and 61.1 g COD m⁻² d⁻¹. The COD removal efficiencies and the cell voltage generation were continuously monitored. The wetland worked simultaneously as an MFC generating electric power. Under low organic loading rates, the wastewater organic matter was completely oxidised in the lower anaerobic compartment, and there were slight aerobic conditions in the upper cathodic compartment, thus causing an electrical current. Under high organic loading rates, the organic matter could not be completely oxidised in the anodic compartment and flowed to the cathodic one, which entered into anaerobic conditions and caused the MFC to stop working. The system developed in this work offered similar cell voltage, power density, and current density values compared with the ones obtained in previous studies using photosynthetic MFCs, sediment-type MFCs, and plant-type MFCs. The light/darkness changes caused voltage fluctuations due to the photosynthetic activity of the macrophytes used (Phragmites australis), which affected the conditions in the cathodic compartment.     

Comprehensive characterization of the functional activities of pressurized liquid and ultrasound-assisted extracts from Chlorella vulgaris

Chlorella vulgaris has been referred as a potential source of bioactive compounds (carotenoids and fatty acids). In this work, the ability of an environmentally friendly extraction technique such as Pressurized Liquid Extraction (PLE) and a traditional extraction technique such as Ultrasound-Assisted Extraction (UAE) to obtain functional compounds from C. vulgaris, at analytical scale, has been demonstrated. Seeked bioactivities were antioxidant and antimicrobial, for their interest in the food industry. Therefore, a methodology including analytical extraction, in-vitro assays and chemical characterization via HPLC-DAD and GC–MS has been used to determine the interest of Chlorella as a source of functional food ingredients. Results demonstrated that PLE provide higher yields than UAE while similar bioactivities were obtained. Important concentration of carotenoids (lutein, neoxanthin, β-carotene, etc.), chlorophylls, sterols, phytols, and fatty acids (among others) have been found in Chlorella extracts that could be correlated to the observed biological activity.     

Determination of 200 °C Isothermal Section of Al-Ag-Ga Phase Diagram by Microanalysis,X-ray Diffraction,Hardness and Electrical Conductivity Measurements

Ternary Al-Ag-Ga system at 200 °C was experimentally and thermodynamically assessed. Isothermal section was extrapolated using optimized thermodynamic parameters for constitutive binary systems. Microstructure and phase composition of the selected alloy samples were analyzed using light microscopy, scanning electron microscopy combined with energy-dispersive spectrometry and x-ray powder diffraction technique. The obtained experimental results were found to be in a close agreement with the predicted phase equilibria. Hardness and electrical conductivity of the alloy samples from four vertical sections Al-Ag₈₀Ga₂₀, Al-Ag₆₀Ga₄₀, Ag-Al₈₀Ga₂₀ and Ag-Al₆₀Ga₄₀ of the ternary Al-Ag-Ga system at 200 °C were experimentally determined using Brinell method and eddy current measurements. Additionally, hardness of the individual phases present in the microstructure of the studied alloy samples was determined using Vickers microhardness test. Based on experimentally obtained results, isolines of Brinell hardness and electrical conductivity were calculated for the alloys from isothermal section of the ternary Al-Ag-Ga system at 200 °C.