The scanning Kelvin probe; a new technique for the in situ analysis of the delamination of organic coatings

Corrosion reactions which take place during delamination in the vicinity of defects have not been understood up to now. In this paper the delamination of a simple model coating from clean steel and the delamination of technical coatings from petreated steel substrates are analysed with a scanning Kelvin probe. It is possible, with this technique, to follow the delamination in situ and to understand the basic corrosion mechanism at the metal/polymer interface.     

Application of the hybrid process ultrasound enhanced friction stir welding on dissimilar aluminum/dual‐phase steel and aluminum/magnesium joints

Friction stir welding as a solid‐state joining method with its comparatively low process temperatures is suitable for joining dissimilar materials like aluminum/magnesium or aluminum/steel. Such hybrid joints are of great interest regarding lightweight efforts in different industrial fields like the transportation area. The present work investigates the influence of additionally transmitted power ultrasound during the friction stir welding on the joint properties of EN AC‐48000/AZ91 and EN AW‐6061/DP600. Therefore, conventional friction stir welding was continuously compared to ultrasound enhanced friction stir welding. Light microscopic analysis and nondestructive testing of the joints using x‐ray and high frequency ultrasound show different morphologies of the nugget for the aluminum/magnesium joints as well as differences in the amount and size of steel particles in the nugget of aluminum/steel joints. Scanning electron microcopy proves differences in the thickness of continuous intermetallic layers for the aluminum/steel joints realized with and without power ultrasound. Regarding the tensile strength of the joints the power ultrasound leads to increased joint strengths for EN AC‐48000/AZ91 joints compared to a decrease for EN AW‐6061/DP600 joints. Corrosion investigations show an influence of the ultrasound power on the corrosion properties of EN AC‐48000/AZ91 joints which is attributed to a changed aluminum content in the nugget region. Because of the great potential difference between the magnesium and the nugget phase the transitional area exhibits strong galvanic corrosion. For EN AW‐6061/DP600 joints an increased corrosion caused by galvanic effects is not expected as the potentials of the EN AW‐6061 aluminum alloy and DP600 steel are very similar.     

Influence of bacterial exopolymers on cell adhesion of Desulfovibrio vulgaris on high alloyed steel: Corrosion inhibition by extracellular polymeric substances (EPS)

Extracellular polymeric substances (EPS) were studied with regard to their potential application as inhibitors of biocorrosion. EPS that have been isolated from biofilms of sulphate‐reducing bacteria (SRB) were adsorbed on samples of high alloyed steel (type 1.4301) at different temperatures. The samples were exposed to SRB containing solution and afterwards analysed by fluorescence microscopy (FM). The results show that the EPS form an incomplete layer and lead to a smaller amount of cell adhesion when compared to pure surfaces. The results are discussed with regard to the application of EPS for the prevention of biofilm formation.     

Effect of AC interference on the corrosion behavior of cathodically protected mild steel in an artificial soil solution. Part I: Investigation on formed corrosion product layer

AC-induced corrosion is a big threat even for cathodically protected pipelines nowadays. While this phenomenon was intensively investigated in the last decades, the corrosion mechanisms due to AC interference remain unclear. In the present work, investigations on the surface processes on cathodically protected mild steel during AC polarization have been performed. They utilized high-speed potential measurements that have demonstrated the influence of the polarization parameters on the resulting alternating voltage. The corrosion product layer was characterized with scanning electron microscopy, electron probe microanalysis, and Raman spectroscopy, which clearly show the effect of the parameters of the applied alternating current on the surface under different cathodic protection (CP) conditions. It was demonstrated that the properties of the formed corrosion product layer, meaning the layer thickness, amount of oxygen, and so on, is not only dependent on the AC polarization parameters but also on the CP potential itself.     

Progress in corrosion protection as a requirement for technical progress

In many of the more recent technologies, corrosion plays a crucial role in determining their successful application. The present paper identifies such important corrosion issues in a number of technologies, which are currently under development or have been recently discussed. In this sense, CO₂ sequestration, fuel cells, offshore wind energy and other offshore technologies, geothermal energy, advanced coal conversion technologies, nuclear energy, light weight construction in transport, ionic liquids as well as medical technologies are discussed with respect to corrosion problems and existing research needs. In this way, this paper intends to show the complexity and the variety of corrosion topics of today and at the same time, point at the economic aspects and the impact on daily life. In the end, this leads to an introduction of the World Corrosion Organization and its study on future needs for research and development in materials degradation and corrosion control.