Untersuchung der Verteilung und Intensität filamentierter Barrierenplasmen für die Behandlung von Oberflächen

The application of barrier discharges at atmospheric pressure in air expands on the market of plasma technology, because it is an ecological and cost‐effective alternative to other processes of surface treatment. These plasmas usually consist of a multitude of spatially and temporally localized filaments, whose distribution should be as even as possible for homogeneous treatment. This holds especially for the plasma treatment of sensitive goods such as wool or other textiles. In equipment for continuous pass of material the barrier arrangements often consist of a system cylinder – cylinder or cylinder – plane, whereby the gap width changes locally. Space distribution and intensity of filaments has been investigated by means of short‐time photography and spatially resolved measurement of current distribution and energy distribution derived from it. The local dependency found can be explained by means of a capacitive equivalent circuit.     

Artificial added mass instabilities in sequential staggered coupling of nonlinear structures and incompressible viscous flows

Within this paper the so-called artificial added mass effect is investigated which is responsible for devastating instabilities within sequentially staggered Fluid-structure Interaction (FSI) simulations where incompressible fluids are considered.A discrete representation of the added mass operator M_A is given and ‘instability conditions’ are evaluated for different temporal discretisation schemes. It is proven that for every sequentially staggered scheme and given spatial discretisation of a problem, a mass ratio between fluid and structural mass density can be found at which the coupled system becomes unstable. The analysis is quite general and does not depend upon the particular spatial discretisation schemes used. However here special attention is given to stabilised finite elements employed on the fluid partition. Numerical investigations further highlight the results.     

Controlling autoreactivity of CD4 T cells by local tolerance induction

We have used a plasmid containing the argB gene to transform an Aspergillus nidulans argB-deleted strain in the presence of restriction enzymes and show a 20- to 60-fold increase in transformation frequency via restriction enzyme-mediated integration (REMI). This procedure was used to try to tag new genes involved in the asexual development of this fungus. More than 2000 transformants isolated following electroporation of conidia and approximately 3700 transformants recovered following protoplast fusion were screened for sporulation defects. Unexpectedly, developmental mutants were obtained only when the protoplast fusion approach was used. Southern blot analysis of these mutants, and of randomly selected transformants obtained by electroporation, was consistent with the occurrence of single plasmid integration events in 33 and 65% of the cases, respectively. The argB marker was shown to be tightly linked to the mutant phenotype in only 62% of the mutants analyzed by sexual crosses. Partial DNA sequencing of a tagged gene, whose mutation delays asexual sporulation and results in a fluffy phenotype, showed no homology to previously reported sequences. Our results indicate that REMI can be used in A. nidulans to increase the transformation frequency and illustrate the advantages and potential problems when using REMI to tag genes of interest in this and other fungi.     

2‐(1‐Ethynylpyrene)‐Adenosine as a Folding Probe for RNA—Pyrene in or out

A series of short RNA duplexes containing one or two 1‐ethynylpyrene‐modified adenine bases was synthesised. The melting behaviour of these duplexes was examined by monitoring temperature‐dependent pyrene fluorescence. In the singly modified RNA duplexes, the bases flanking the ethynylpyrene‐rA were varied to examine the sequence specificity of the fluorescence change of pyrene upon RNA hybridisation. Because an increase in pyrene fluorescence upon melting of the duplex can be correlated with intercalation of pyrene, and a decrease is usually associated with the position of pyrene outside the strand, a relationship between the flanking bases and the tendency of the dye to intercalate has been established. It was found that pyrene intercalation is less likely to take place if the modified base is flanked only by A–U base pairs. Flanking G–C base pairs, even only in the 5′‐direction of the modified base, will favour intercalation. In addition, we examined a doubly modified compound that had a pyrene located on each strand. The spectra indicated that the two pyrenes were close enough for interaction. Upon melting of the strand, a fluorescence blue shift corresponding to the dissociation of the pyrene–pyrene complex could be observed in addition to the intensity effect already known from the singly modified compounds. Two melting curves based on the different properties of the fluorophore could be extracted, leading to different melting points corresponding to the global duplex melting and to the change of local pyrene environment, respectively.     

Vaporization--Condensation Generation of Ultrafine Hydrocarbon Particulate Matter for Inhalation Toxicology Studies

An evaporation/condensation particle generator produced 30-50 nm count median diameter particles from both pure hydrocarbons and from a complex mixture--used motor oil--at a concentration above 1 2 10 6 /cm 3 . The objective was to generate ultrafine aerosols for inhalation toxicology studies using specified organic components as surrogates for the particulate emissions generated by diesel internal combustion engines. This nanoparticle generation system, assembled from commercially available components, produced smaller particle size and higher particle number concentration than has been previously documented using Sinclair-La Mer condensation generator technology. The paper describes both the experiments used to design and characterize the particle generator and the operating conditions used for a specific inhalation experiment as an example of the system capability.     

A comparison of biological activities of a new soya biopeptide studied in an in vitro skin equivalent model and human volunteers

During aging, the epidermis and dermis become thin and an efficient anti-aging product should be able to stimulate the metabolism of senescent fibroblast and keratinocytes, in order to increase the quantity of extra-cellular matrix components such as collagen and glycosaminoglycans. A study performed in parallel on an in vitro skin equivalent model, and in vivo, with human volunteers, demonstrated the efficacy of one specific soya biopeptide for anti-aging properties. Such a biopeptide induces a significant increase of glycosaminoglycans synthesis in vitro and in vivo after a one-month treatment. We also showed that this new cosmetic ingredient is able to stimulate favourably the collagen synthesis in vitro and in vivo. This study provided the proof for anti-aging properties of a new soya biopeptide and also validated the skin equivalent model developed for this experimentation as an alternative method to animal or human testing for some cosmetic efficacy evaluations.     

Bildung von oxydischen Einschlüssen in halbberuhigtem Stahl

Untersuchung von 20-t-Blöcken mit unterschiedlichen Aluminiumzugaben für die Feindesoxydation während der Erstarrung in der Kokille. Oberflächenfehler von halbberuhigtem Stahl. Bildung von oxydischen Einschlüssen dicht unter der Blockoberfläche und im Blockinnern. Maßnahmen zur Beeinflussung der Einschlußausbildung.     

Untersuchungen zum Kristallabbau bei der Reduktion von Wüstit

Reduktionsversuche an auf Eisen aufoxydiertem Wüstit mit Kohlenmonoxid-Kohlendioxid-Stickstoff- und Wasserstoff-Wasserdampf-Stickstoff-Gasgemischen. Mikroskopische Beobachtung der anreduzierten Wüstitoberfläche. Beeinflussung der Reduktion durch die Oberflächentopographie des Wüstits. Analogie der Wüstitreduktion unter gleichgewichtsnahen Bedingungen zur Kristallverdampfung.     

Variable temperature UHV dual-range cell for spectroscopic surface studies

A stainless steel cell for transmission spectroscopy of surface compounds is described. This cell allows subsequent spectra recording of the sample in two spectral regions requiring different window materials. The sample temperature can be varied from 100 to 700 K, the pressure from 10(-6) to 10(5) Pa. The mean temperatue is measured inside the wafer with a thin platinum wire as a resistance thermometer.