Synchronous Full-Scan for Asynchronous Handshake Circuits

Handshake circuits form a special class of asynchronous circuits that has enabled the industrial exploitation of the asynchronous potential such as low power, low electromagnetic emission, and increased cryptographic security. In this paper we present a test solution for handshake circuits that brings synchronous test-quality to asynchronous circuits. We add a synchronous mode of operation to handshake circuits that allows full controllability and observability during test. This technique is demonstrated on some industrial examples and gives over 99% stuck-at fault coverage, using test-pattern generators developed for synchronous circuits. The paper describes how such a full-scan mode can be achieved, including an approach to minimize the number of dummy latches in case latches are used in the data path of the handshake circuit.     

Genetic and physical mapping of the WBP1 locus close to CENV.

The WBP1 locus, encoding an essential component of the N-oligosaccharyl transferase, was mapped both genetically and physically. The gene is located on chromosome V between CENV and gcn4. The distance from CENV sequences is 2 kb.     

Fat and female fecundity: prospective study of effect of body fat distribution on conception rates

OBJECTIVES: To study the effect of body fat distribution in women of reproductive age on fecundity. DESIGN: Prospective cohort study of all women who had entered a donor insemination programme. SETTING: One fertility clinic serving a large part of the midwest of the Netherlands. SUBJECTS: Of 542 women attending the clinic for artificial insemination for the first time, 500 women were eligible for study. MAIN OUTCOME MEASURES: Probability of conception per cycle and number of insemination cycles before pregnancy or stopping treatment. RESULTS: A 0.1 unit increase in waist-hip ratio led to a 30% decrease in probability of conception per cycle (hazard ratio 0.706; 95% confidence interval 0.562 to 0.887) after adjustment for age, fatness, reasons for artificial insemination, cycle length and regularity, smoking, and parity. Increasing age was significantly related to lower fecundity (p < 0.05); very lean and obese women were less likely to conceive (p < 0.10) as were women with subfertile partners (p < 0.10). All other exposure variables were not significantly related to fecundity. CONCLUSIONS: Increasing waist-hip ratio is negatively associated with the probability of conception per cycle, before and after adjustment for confounding factors. Body fat distribution in women of reproductive age seems to have more impact on fertility than age or obesity.     

基于强跟踪滤波器的开关变换器故障诊断

Buck变换器又称降压变换器、串联开关稳压电源、三端开关型降压稳压器。广泛用于计算机、家用电器、控制系统和通信系统中的电源几乎都是开关电源,具有超快速负载动态响应、高功率变换效率、高功率密度、低电压、大电流的特性.开关变换器作为它的主要电路,故障率较高,对它故障诊断研究是有意义的。基于强跟踪滤波理论,给出了一种开关变换器电路故障实时诊断的一种方法。该方法以建立一种开关变换器电路状态空间模型为基础,利用强跟踪滤波器对电路状态及元件参数进行估计,当元件参数发生软、硬型故障时,根据强跟踪滤波器对元件参数的跟踪结果及修正的Bayes分类算法,可实时诊断开关变换器电路中的元件故障。仿真结果证明了该方法的有效性。     

The movement patterns and the experiential components of virtual environments

Human movement in virtual environments (VEs) is a largely unstudied area, and there are no well-established methods of measuring it in VEs. Consequently, it is unclear how movement affects the experiential side of VEs. We introduce a novel method of measuring and modelling human movement. A specific information entropy-based modelling method enabled us to identify different movement patterns and analyse the experiential components related to them. The data was collected by registering the movement patterns of 68 participants who were in a virtual house doing a search task. The experiential side of the VE was measured with the Experimental Virtual Environment Questionnaire (EVEQ). Four movement patterns were identified. In addition, fluent movement in VEs was related to a high sense of presence. Moreover, the participants who moved fluently in the environment assessed their skills high. The results show how movement is related the way in which people experience the VE. The movement analysis method introduced here is applicable to other related research areas as well.     

A new adaptive backstepping Coulomb friction compensator for servo control systems

A new Coulomb friction compensator is proposed for servo control systems in this paper. The novelty of the new approach lies in its capability of assigning the eigenvalues of the resulting closed loop system while attacking the problem. First, based on the standard backstepping methodology, an implicit Lyapunov function, with part of the components being only symbolically constructed at the very beginning, is utilized. To increase the robustness of the system against disturbance and model inaccuracy, an integral term is employed in the design. Using part of the variable gradient method, we are able to turn the implicit Lyapunov function into an explicit one, which is positive definite, and whose time‐derivative is negative definite. Second, it will be shown that the resulting closed loop error system is a switched linear system with two possible active modes that share the same set of eigenvalues, which is at our disposal. Unlike the common adaptive control design methods, such as the Control Lyapunov Function approach, in which the gains are typically positive but otherwise arbitrary, and are hence difficult to choose and have a lack of connection with the system's performance, our new scheme imposes two further constraints on the gains. It turns out that we can then match these gains with the coefficients of the desired characteristic equation of the closed loop system. In this respect, the gains are linked to the system's overall performance, which is a new and very appealing feature for such a scheme. Finally, a procedure of constructing a common Lyapunov function is provided to prove exponential stability of the aforementioned switched linear system. In addition, using the invariance principle, we will show the convergence of the estimated Coulomb friction coefficient to its real value. Numerical simulations are given to validate the effectiveness of the design and its robustness against friction time‐variations. Compared to existing results, the proposed scheme is much simpler, hence, much more advantageous computationally. Copyright © 2009 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Systems modelling for effective mine water management

Concerns about the difficulties in securing water have led the Australian coal mining industry to seek innovative ways to improve its water management and to adopt novel strategies that will lead to less water being used and more water being reused. Simulation tools are essential to assess current water management performance and to predict the efficiency of potential strategies. As water systems on coal mines are complex and consist of various inter-connected elements, a systems approach was selected, which views mine site water management as a system that obtains water from various sources (surface, groundwater), provides sufficient water of suitable quality to the mining tasks (coal beneficiation, dust suppression, underground operations) and maintains environmental performance. In this paper, the model is described and its calibration is illustrated. The results of applying the model for the comparison of the water balances of 7 coal mines in the northern Bowen Basin (Queensland, Australia) are presented. The model is used to assess the impact of applying specific water management strategies. Results show that a simple systems model is an appropriate tool for assessing site performance, for providing guidance to improve performance through strategic planning, and for guiding adoption of site objectives.     

Development of a 3D HUD using a tunable bandpass filter for wavelength multiplexing

A 3D stereoscopic head‐up display using a tunable bandpass filter to perform left and right image spectral separation is presented. Using a single filter reduces the size and the cost of the head‐up display optical engine and enables each spectral band to be accurately tuned. Experiments performed on the first prototype demonstrate the ability to continuously tune the bandpass frequency on 30‐nm range while keeping a 20‐nm bandwidth. Such a system avoids the use of a bulky and costly rotating wheel and enables the use of holographic optical elements known to be wavelength selective.     

Magnetic compound refractive lens for focusing and polarizing cold neutron beams

Biconcave cylindrical lenses are used to focus beams of x rays or neutrons using the refractive properties of matter. In the case of neutrons, the refractive properties of magnetic induction can similarly focus and simultaneously polarize the neutron beam without the concomitant attenuation of matter. This concept of a magnetic refractive lens was tested using a compound lens consisting of 99 pairs of cylindrical permanent magnets. The assembly successfully focused the intensity of a white beam of cold neutrons of one spin state at the detector, while defocusing the other. This experiment confirmed that a lens of this nature may boost the intensity locally by almost an order of magnitude and create a polarized beam. An estimate of the performance of a more practically dimensioned device suitable for incorporation in reflectometers and slit-geometry small angle scattering instruments is given.