纳米碳管的电子衍射及其螺旋度测量

本文对电弧放电和催化剂热解碳氢气法制备的多层直形纳米碳管的倒空间及其螺旋度，采用电子衍射进行了研究。结果表明：尽管制备方法不同，两类多层管的结构相似，皆由螺旋和非螺旋的单层石墨管组成；对其倒空间的分析以及系列倾转电子衍射实验证明，衍射图中测得的表观螺旋度值随和射条件而改变，只有在垂直入射条件下该值才代表碳管的真实螺旋度；     

我国纳米科技的现状与展望

本文概述了纳米科技的沿革，及其在国内外发展的情况，并就我国如何进一步发展纳米科技提出了自己的想法。     

碳热法合成具有蓝光发射特性的氧化镓纳米线、纳米带和纳米片

利用碳纳米管通过碳热法合成了氧化镓纳米线、纳米带和纳米片。采用扫描电镜和透射电镜对其进行了形态和结构表征。合成的氧化镓纳米结构是单晶体。室温光致发光谱分析发现，氧化镓纳米晶在蓝光区域487nm处产生明显的发射峰。     

Electrochemical production of Sn-filled carbon nanotubes in molten salts

Sn-filled carbon nanotubes(CNTs) were prepared in situ by electrolysis of graphite in molten LiCl/SnCl2 mixtures. Transmission electron microscopy(TEM) investigation shows that the as-made products contain abun-dance of carbon nanotubes and most of them are filled with metal nanoparticles or nanorods. Some nanotubes are e-ven inserted with long continuous nanowires more than several micrometers in length. Selected area electron diffrac-tion(SAED) patterns and energy dispersive X-ray spectroscopy(EDS) of the filled nanotubes confirm the presence of Sn inside the nanotubes. The encapsulated Sn was further identified as β-Sn with tetragonal structure. Based on the experimental results, a possible growth mechanism of the Sn-filled nanotubes was also discussed.     

基于随机共振的纳米碳管气体传感器的研究

基于气体电晕放电原理,利用纳米碳管独特的物理结构和尖端发射效应,提出了一种新型的纳米碳管离子型气体传感器.采用阳极氧化铝模板法生长的定向纳米碳管阵列所构成的传感器,纳米碳管和电极是一体的,简化了器件结构和工艺.在外加直流电压激励下,纳米碳管顶部形成很强的非均匀电场,在电压相对低的情况下能很容易地电离气体,根据气体的击穿电压和放电电流来实现对单一气体和确定性混合气体的检测.为了提高检测混合气体的灵敏度,创新地在检测回路中引入随机共振发生装置,有效地提高了混合气体浓度检测的范围.实验中还分析了温度、湿度对传感器的影响,对该传感器的性能也作了评价.实验结果表明该传感器具有选择性好、体积小、响应时间快、灵敏度高、稳定性好,室温操作等优点,而且实现方便,操作简单,有较大的实用价值.     

纳米碳管气体放电气敏传感器中随机共振现象的研究

在对某些非线性动力学系统中,存在着随机共振现象,它不是通过消除噪声而是利用噪声来达到检测微弱信号的目的,随机共振是非线性动力系统中的普遍现象,它向人们展示了噪声在非线性体系中的积极作用.本文对纳米碳管气体放电气敏传感器中的随机共振现象进行了研究,利用纳米碳管电极作为气敏传感器阳极,在以空气为目标气体的传感器检测系统中观察到二重随机共振现象.提取放电周期脉冲信号,利用高斯白噪声调制放电周期脉冲信号,输出信噪比的仿真结果与实际观察到的二重随机共振现象一致.     

不同结构的碳纳米管的氢吸附行为

Several kinds of multi-wall carbon nanotubes (MWNTs) with different morphology were synthesized using catalytic decomposition of hydrocarbons over different metal catalysts.The products were characterized by TEM, HREM and SEM. Hydrogen adsorption properties of the MWNTs were investigated by volumetric measurement at room temperature under a modest pressure(6—7 MPa).The results indicate that both the structure of the MWNTs and the metal catalysts will affect the hydrogen adsorption capacity of the sample...     

热喷涂技术的现状和发展

本文综述了国内外热喷涂的发展历史，现状及其应用，并讨论了该领域中当前研究的热点问题。     

氢气在大量高纯度定向碳纳米管束中的吸附

Multi-walled carbon nanotubes with uniform diameters and automatically assembled into densely aligned bundles prepared by a bulky yield and high purity were applied as hydrogen absorbant at room temperature under moderate pressure to absorb H_2. Both the surface of nanotubes and the interstitial space among tubes are possible sites for hydrogen molecules to adhere. The hydrogen uptake capacity is 0.82% (mass)and the interstitial position is considered as a promising site for hydrogen absorption.     

以纳米碳管为媒介生长的纳米石英晶须的微结构

应用电子显微技术,研究了以纳米碳管为媒介生长的ＳｉＯ２晶须的形貌其微结构特征,这些晶须为六角结构的α－ＳｉＯ２,直径为数十纳米,长度可达１００μｍ以上,生长方向一般为「１１－２０」方向,且在棱面方向上存在互成１２０°的面缺陷。