Abnormal activation of Toll-like receptor (TLRs) signaling can result in colon cancer development. The aim of this study was to investigate the expression of important TLRs in different histological types of colorectal polyps and evaluate their relationship with intestinal microbiota. The expression levels of TLR2, 3, 4, and 5 were analyzed in intestinal biopsy specimens of 21 hyperplastic polyp (HP), 16 sessile serrated adenoma (SSA), 29 tubular adenoma (TA), 21 villous/tubulovillous (VP/TVP) cases, and 31 normal controls. In addition, selected gut bacteria including Streptococcus bovis, Enterococcus faecalis, Enterotoxigenic Bacteroides fragilis (ETBF), Fusobacterium nucleatum, Porphyromonas spp., Lactobacillus spp., Roseburia spp., and Bifidobacterium spp. were quantified in fecal samples using absolute qRT PCR, and, finally, the association between TLRs and these gut microbiota- was evaluated by Spearman’s correlation coefficient. Higher expression of TLR2 and TLR4 in VP/TVP and TA, and lower expression levels of TLR3 and TLR5 in all type of polyps were observed. The differences in TLR expression patterns was not only dependent on the histology, location, size, and dysplasia grade of polyps but also related to the intestinal microbiota patterns. TLR2 and TLR4 expression was directly associated with the F. nucleatum, E. faecalis, S. bovis, Porphyromonas, and inversely to Bifidobacterium, Lactobacillus, and Roseburia quantity. Furthermore, TLR3 and TLR5 expression was directly associated with Bifidobacterium, Roseburia, and Lactobacillus quantity. Our results suggest a possible critical role of TLRs during colorectal polyp progression. An abnormal regulation of TLRs in relation to gut microbial quantity may contribute to carcinogenesis. 相似文献
In this work, the sintering behaviour of fluorapatite (FAp)–silicate composites prepared by mixing variable amounts of natural quartz (2.5 wt% to 20 wt%) and FAp was studied. The composites were pressureless sintered in air at temperatures from 1000 °C to 1350 °C. The effects of temperatures on the densification, phase formation, chemical bonding and Vickers hardness of the composites were evaluated. All the samples exhibited mixed phase, comprising FAp and francolite as the major constituents along with some minor phases of cristobalite, wollastonite, dicalcium silicate and/or whitlockite dependent on the quartz content and sintering temperature. The composite containing 2.5 wt% quartz exhibited the best sintering properties. The highest bulk density of 3 g/cm3 and a Vickers hardness of >4.2 GPa were obtained for the 2.5 wt% quartz–FAp composite when sintered at 1100 °C. The addition of quartz was found to alter the microstructure of the composites, where it exhibited a rod-like morphology when sintered at 1000 °C and a regular rounded grain structure when sintered at 1350 °C. A wetted grain surface was observed for composites containing high quartz content and was believed to be associated with a transient liquid phase sintering. 相似文献
As per the most recent literature, Orthogonal Frequency Division Multiplexing (OFDM), a multi access technique, is considered most suitable for the 3G, 4G and 5G techniques in high speed wireless communication. What made OFDM most popular is its ability to deliver high bandwidth efficiency and superior data rate. Besides it, high value of peak to average power ratio (PAPR) and Inter Carrier Interference (ICI) are the challenges to tackle down via appropriate mitigation scheme. As a research contribution in the present work, an improved self-cancellation (SC) technique is designed and simulated through Simulink to mitigate the effect of ICI. This novel proposed technique (Improved SC) is designed over discrete wavelet transform (DWT) based OFDM and compared with conventional SC scheme over different channel conditions i.e. AWGN and Rayleigh fading environments. It is found that proposed DWT-OFDM with Improved SC scheme outperforms conventional SC technique significantly, under both AWGN and Rayleigh channel conditions. Further, in order to justify the novelty in the research contribution, a Split-DWT based Simulink model for Improved SC scheme is investigated to analyse the BER performance. This Split-DWT based Simulink model presented here foretells the future research potential in wavelet hybridization of OFDM to side-line ICI effects more efficiently.
Transition metal oxyhydroxides have been used as promising electrocatalysts for water splitting however, their catalytic activity is restricted due to low surface area and poor conductivity. Herein, we report novel composite FeOOH@ZIF-12/graphene composite as electrocatalyst for water oxidation, whereby ZIF-12 provide extra surface for the FeOOH dispersion whilst graphene act as excellent electron mediator. The composite shows a low overpotential value of 291 mV to attain a current density of 10 mA cm?2 and a low Tafel slope value of 78 mV dec?1. The catalyst offers a maximum current density of 101 mA cm?2, while it gives a turnover frequency (TOF) value of 0.031 s?1 at an overpotential of 291 mV only. The excellent activity and remarkable stability of composite is attributed to highly conductive and porous support. 相似文献
This paper reports on an investigation of feedback control of coronal plane posture in paraplegic subjects who stand using functional neuromuscular stimulation (FNS). A feedback control system directed at regulating coronal plane hip angle in neutral position was designed, implemented, and evaluated in two paraplegic subjects. The control system included sensor mounting and signal processing techniques, a two-stage feedback controller, stimulation hardware, and a set of percutaneous intramuscular electrodes. The feedback controller consisted of two-stages in cascade: a modified discrete-time proportional-integral-derivative (PID) stage and a nonlinear single-input, multiple-output stage to determine the stimulation to be sent to several muscles. The focus of this work was on evaluating the performance of the feedback controller by comparing the response of the feedback-controlled system to that of an open-loop stimulation system. In an evaluation based on temporal response characteristics the controlled system exhibited a 41% reduction in root-mean-squared (rms) error (where error is defined as the deviation from the desired angle), a 52% reduction in steady-state error, and a 22% reduction in hip compliance. In addition, the feedback-controlled system exhibited significant reductions in variability of these measures on several days. These results demonstrate the ability of the feedback controller to improve the temporal response characteristics of the FNS control system. 相似文献
The dielectric properties of a ceramic powder (BaTiO3) filled thermoplastic elastomer (EPDM TPE) were investigated for use in a flexible electromagnetic crystal. Materials were produced that had a high dielectric constant (approximately 9) and low loss tangent (less than 0.01). Materials were extruded and injection molded so as to povide low‐cost processing. Mechanical and electromagnetic test results showed the effect of processing conditions on the final quality of the composite. The shear rate during processing and the number of mixing cycles were found to affect the final material characteristics significantly. An electromagnetic crystal woven from extruded rods showed good reflectivity in the 10–15 GHz region. 相似文献
High-quality, high-temperature superconducting (HTS) thin-films exhibit very low losses at microwave frequencies and, as a result, allow very high Q resonators to be produced. The size of such resonators may be significantly reduced by loading with low-loss single crystal dielectric. The potential for HTS dielectric loaded resonators as practical frequency standards and reference elements for low-phase-noise oscillators is assessed, with emphasis on operation at 60 K, a temperature readily attainable with compact Stirling cycle coolers 相似文献