Electrolytic cell engineering and device optimization for electrosynthesis of e-biofuels via co-valorisation of bio-feedstocks and captured CO2

Utilizing CO₂ in an electro-chemical process and synthesizing value-added chemicals are amongst the few viable and scalable pathways in carbon capture and utilization technologies.CO₂ electro-reduction is also counted as one of the main options entailing less fossil fuel consumption and as a future electrical energy storage strategy.The current study aims at developing a new electrochemical platform to produce low-carbon e-biofuel through multifunctional electrosynthesis and integrated co-valorisation of biomass feedstocks with captured CO₂.In this approach,CO₂ is reduced at the cathode to produce drop-in fuels(e.g.,methanol)while value-added chemicals(e.g.,selective oxidation of alcohols,aldehydes,carboxylic acids and amines/amides)are produced at the anode.In this work,a numerical model of a continuous-flow design considering various anodic and cathodic reactions was built to determine the most techno-economically feasible configurations from the aspects of energy efficiency,environment impact and economical values.The reactor design was then optimized via parametric analysis.     

Design optimization of the quantization and a pipelined 2D-DCT for real-time applications

The Discrete Cosine Transform (DCT) is one of the most widely used techniques for image compression. Several algorithms are proposed to implement the DCT-2D. The scaled SDCT algorithm is an optimization of the DCT-1D, which consists in gathering all the multiplications at the end. In this paper, in addition to the hardware implementation on an FPGA, an extended optimization has been performed by merging the multiplications in the quantization block without having an impact on the image quality. A simplified quantization has been performed also to keep higher the performances of the all chain. Tests using MATLAB environment have shown that our proposed approach produces images with nearly the same quality of the ones obtained using the JPEG standard. FPGA-based implementations of this proposed approach is presented and compared to other state of the art techniques. The target is an an Altera Cyclone II FPGA using the Quartus synthesis tool. Results show that our approach outperforms the other ones in terms of processing-speed, used resources and power consumption. A comparison has been done between this architecture and a distributed arithmetic based architecture.     

Trust-based authentication scheme with user rating for low-resource devices in smart environments

In smart environments, pervasive computing contributes in improving daily life activities for dependent people by providing personalized services. Nevertheless, those environments do not guarantee a satisfactory level for protecting the user privacy and ensuring the trust between communicating entities. In this study, we propose a trust evaluation model based on user past and present behavior. This model is associated with a lightweight authentication key agreement protocol (Elliptic Curve-based Simple Authentication Key Agreement). The aim is to enable the communicating entities to establish a level of trust and then succeed in a mutual authentication using a scheme suitable for low-resource devices in smart environments. An innovation in our trust model is that it uses an accurate approach to calculate trust in different situations and includes a human-based feature for trust feedback, which is user rating. Finally, we tested and implemented our scheme on Android mobile phones in a smart environment dedicated for handicapped people.     

Video transmission enhancement in presence of misbehaving nodes in MANETs

Mobile Ad-hoc NETworks (MANET) are infrastructureless networks where self-configuring mobile nodes are connected by wireless links. Because of its decentralized operation, these nodes rely on each other to store and forward packets. Video transmission over MANETs is more challenging than over conventional wireless networks due to rapid topology changes and lack of central administration. Most of the proposed MANET protocols assume that all nodes are working within a cooperative and friendly network context. However, misbehaving nodes that exhibit abnormal behaviors can disrupt the network operation and affect the network availability by refusing to cooperate to route packets due to their selfish or malicious behavior. In this paper, we examine the effect of packet dropping attacks on video transmission over MANETs. We also study the effects of mitigation using intrusion detection systems to MANET in presence of video traffic. To the best of our knowledge, this is the first attempt to study multimedia over such environments. We propose a novel intrusion detection system, which is an adaptive acknowledgment scheme (AACK) with the ability to detect misbehaved nodes and avoid them in other transmissions. The aim of AACK scheme is to overcome watchdog weaknesses due to collisions and limited transmission power and also to improve TWOACK scheme. To demonstrate the performance of our proposed scheme, simulation experiments are performed. The results of our experiments show that MPEG4 is more suitable for our simulation environment than H264 video traffic. The simulation results show that AACK scheme provides better network performance with less overhead than other schemes; it also shows that AACK outperforms both TWOACK and watchdog in video transmission applications in the presence of misbehaving nodes.     

Fertigung einer universellen Hüftprothesenpfanne mittels Hochdruckblechumformung

In recent years, the use of hip prostheses has become a routine procedure. The use of total hip replacement has evolved in recent years to a routine procedure. Despite this experience, it always comes back to complications. Especially the migration or loosening of the acetabular component because of the artificial load adaptive bone remodeling is still a current problem. This is due to the changing mechanical situation after the implantation of the prosthesis. Another problem is the high bone loss during implantation, which complicates a revision of the prosthesis. One solution is the use of patient‐specific prostheses. So far, the use of these prostheses is limited due to the time‐consuming and cost‐intensive production. The overall objective of the presented project in this publication is the development and establishment of an innovative concept for the production of patient‐specific hip prosthesis made of titanium plates by sheet metal forming. The idea of this concept involves the development of a two‐stage process. First of all a standardized hip prosthesis is made by high‐pressure sheet metal forming and then individually in the second step. This publication contains the derivation of the standard prosthesis. For this purpose, a design methodology was generated, based on the so‐called agglomerative clustering. In addition, presents the results of the numerical preliminary design of the first stage of the process and the tool developed concept in the course of this paper.     

Composite mixed matrix membranes incorporating microporous carbon molecular sieve as filler in polyethersulfone for CO2/CH4 separation

Membrane technology has been considered a key factor for sustainable growth in high-efficiency gas separation. Current mixed matrix membranes (MMMs) technology is rising, but these membranes in the dense structure are having difficulties in operating at high pressures and scale up for commercialization. The purpose of this research is to synthesize composite MMMs (CMMMs) consisting of polyethersulfone (PES), carbon molecular sieve (CMS 1–5 wt %), and Novatex 2471 nonwoven fabric (support layer). The membranes' physical, chemical, and thermal properties were evaluated by different analytical equipment. The morphology of both PES and PES-CMS composite membranes had a porous and asymmetric structure, in which CMS was uniformly distributed in the polymer matrix. The thermal properties showed that the membranes were stable up to 350 °C with a single glass transition temperature. The functional groups in the membrane were confirmed by spectral analysis. The gas performance results showed that carbon dioxide permeance increased with increased CMS concentration and methane permeance decreased due to the hindering effect of CMS under similar operating conditions. The highest selectivity achieved was 12.774 using CMMM of 5 wt % of CMS at 10 bar, which on average was 137.80%, improved selectivity compared to pure PES membrane. The support layer was able to withstand high operating pressures and showed the ability to scale up. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48476.     

Emergence of Antibiotic Resistance in Listeria monocytogenes Isolated from Food Products: A Comprehensive Review

Listeria monocytogenes is an opportunistic pathogen that has been involved in several deadly illness outbreaks. Future outbreaks may be more difficult to manage because of the emergence of antibiotic resistance among L. monocytogenes strains isolated from food products. The present review summarizes the available evidence on the emergence of antibiotic resistance among L. monocytogenes strains isolated from food products and the possible ways this resistance has developed. Furthermore, the resistance of food L. monocytogenes isolates to antibiotics currently used in the treatment of human listeriosis such as penicillin, ampicillin, tetracycline, and gentamicin, has been documented. Acquisition of movable genetic elements is considered the major mechanism of antibiotic resistance development in L. monocytogenes. Efflux pumps have also been linked with resistance of L. monocytogenes to some antibiotics including fluoroquinolones. Some L. monocytogenes strains isolated from food products are intrinsically resistant to several antibiotics. However, factors in food processing chains and environments (from farm to table) including extensive or sub‐inhibitory antibiotics use, horizontal gene transfer, exposure to environmental stresses, biofilm formation, and presence of persister cells play crucial roles in the development of antibiotic resistance by L. monocytogenes.     

Inactivation of Listeria innocua in brined white cheese by a combination of nisin and heat

The objective of this study was to investigate the effect of nisin alone and in combination with heat (63 °C/5 min) on the inactivation of Listeria innocua in white cheese. Nisin was added at different concentrations (500, 1000, and 1500 IU ml⁻¹) to pasteurized milk before curd formation. The curd was soaked for 24 h in 10% solution of brine containing ca 10⁶ CFU ml⁻¹ of a cocktail mixture of three strains of L. innocua. Part of the nisin treated samples were heat treated at 63 °C/5 min. Total mesophilic count (TMC), L. innocua survivors and changes in the pH of white cheese were monitored each 2 d for a period of 12 d of storage at 4 or 10 °C. Nisin at 500 IU ml⁻¹ did not diminish TMC in white cheese compared to the control. The combination of heat and nisin (1000 or 1500 IU ml⁻¹) exhibited a bacteriostatic effect on TMC throughout the storage period at 4 or 10 °C. Nisin at 500 IU ml⁻¹ had a marginal inhibitory activity against L. innocua. However, nisin at 1000 and 1500 IU ml⁻¹l resulted in a more than 2 log₁₀ reduction in L. innocua count and the effect was more prominent at 10 °C. In comparison, the combination of nisin (1000 or1500 IU ml⁻¹) and heat treatment exhibited a synergistic inhibitory activity against L. innocua, where a complete elimination of the organism was accrued after 6 and 8 d of storage at 10 and 4 °C. Therefore, nisin and heat combination could be used as a prudent hurdle to preclude the growth of Listeria in white cheese, especially under the condition of abused refrigeration conditions.