Kinetic study of hydrogen sulfide absorption in aqueous chlorine solution

Hydrogen sulfide (H₂S) is currently removed from gaseous effluents by chemical scrubbing using water. Chlorine is a top-grade oxidant, reacting with H₂S with a fast kinetic rate and enhancing its mass transfer rate. To design, optimize and scale-up scrubbers, knowledge of the reaction kinetics and mechanism is requested. This study investigates the H₂S oxidation rate by reactive absorption in a mechanically agitated gas–liquid reactor. Mass transfer (gas and liquid sides mass transfer coefficients) and hydrodynamic (interfacial area) performances of the gas–liquid reactor were measured using appropriated physical or chemical absorption methods. The accuracy of these parameters was checked by modeling the H₂S absorption in water without oxidant. A sensitivity analysis confirmed the robustness of the model. Finally, reactive absorption of H₂S in chlorine solution for acidic or circumneutral pH allowed to investigate the kinetics of reaction. The overall oxidation mechanism could be described assuming that H₂S is oxidized irreversibly by both hypochlorite anion ClO⁻ (k = 6.75 × 10⁶ L mol⁻¹ s⁻¹) and hypochlorous acid ClOH (k = 1.62 × 10⁵ L mol⁻¹ s⁻¹).     

Label-Free Study of the Global Cell Behavior during Exposure to Environmental Radiofrequency Fields in the Presence or Absence of Pro-Apoptotic or Pro-Autophagic Treatments

It remains controversial whether exposure to environmental radiofrequency signals (RF) impacts cell status or response to cellular stress such as apoptosis or autophagy. We used two label-free techniques, cellular impedancemetry and Digital Holographic Microscopy (DHM), to assess the overall cellular response during RF exposure alone, or during co-exposure to RF and chemical treatments known to induce either apoptosis or autophagy. Two human cell lines (SH-SY5Y and HCT116) and two cultures of primary rat cortex cells (astrocytes and co-culture of neurons and glial cells) were exposed to RF using an 1800 MHz carrier wave modulated with various environmental signals (GSM: Global System for Mobile Communications, 2G signal), UMTS (Universal Mobile Telecommunications System, 3G signal), LTE (Long-Term Evolution, 4G signal, and Wi-Fi) or unmodulated RF (continuous wave, CW). The specific absorption rates (S.A.R.) used were 1.5 and 6 W/kg during DHM experiments and ranged from 5 to 24 W/kg during the recording of cellular impedance. Cells were continuously exposed for three to five consecutive days while the temporal phenotypic signature of cells behavior was recorded at constant temperature. Statistical analysis of the results does not indicate that RF-EMF exposure impacted the global behavior of healthy, apoptotic, or autophagic cells, even at S.A.R. levels higher than the guidelines, provided that the temperature was kept constant.     

Shhedding New Light on the Role of Hedgehog Signaling in Corneal Wound Healing

The cornea, an anterior ocular tissue that notably serves to protect the eye from external insults and refract light, requires constant epithelium renewal and efficient healing following injury to maintain ocular homeostasis. Although several key cell populations and molecular pathways implicated in corneal wound healing have already been thoroughly investigated, insufficient/impaired or excessive corneal wound healing remains a major clinical issue in ophthalmology, and new avenues of research are still needed to further improve corneal wound healing. Because of its implication in numerous cellular/tissular homeostatic processes and oxidative stress, there is growing evidence of the role of Hedgehog signaling pathway in physiological and pathological corneal wound healing. Reviewing current scientific evidence, Hedgehog signaling and its effectors participate in corneal wound healing mainly at the level of the corneal and limbal epithelium, where Sonic Hedgehog-mediated signaling promotes limbal stem cell proliferation and corneal epithelial cell proliferation and migration following corneal injury. Hedgehog signaling could also participate in corneal epithelial barrier homeostasis and in pathological corneal healing such as corneal injury-related neovascularization. By gaining a better understanding of the role of this double-edged sword in physiological and pathological corneal wound healing, fascinating new research avenues and therapeutic strategies will undoubtedly emerge.     

Almost exact modelling assumption in adaptive linear control

Modem adaptive controllers are known to give bounded solutions when the system ‘normalized’ unmodelled effects are bounded by a small constant. This paper studies this unusual characterization of uncertainties. We show it encompasses more classical approaches. We discuss how feedback and by-passing may allow this assumption to be satisfied. We conclude by proposing the notion of almost exactly linearly modelled systems.     

Lipid oxidation products of heated soybeans as a possible cause of protection from ruminal biohydrogenation

Heating oilseeds has been shown to improve the milk fatty acid profile when given to dairy cows, compared to raw oilseeds. However, results from published studies are conflicting. The conditions of heating and storage of the oilseeds could be responsible for these differences, probably partly through their effects on lipid oxidation, the products of which could act on ruminal biohydrogenation (BH). Thus, 15 different treatments were applied to ground soybeans: three levels of heating (no heating, 30 min at 110 or 150°C) × 5 ambient storage durations (0, 1, 2, 4, or 6 months). Soybeans were incubated in vitro with ruminal fluid for 6 h. Triacylglycerol (TAG) polymers, hydroperoxides and hydroxyacids (HOA), aldehydes, and fatty acids were assayed in soybeans and ruminal culture. No TAG polymer was detected in any treatment. Soybeans stored for a long time had a high content of HOA, whereas those heated at 150°C, whatever the storage duration, had high aldehyde contents. The percentage disappearance of cis‐9,cis‐12 18:2 and cis‐9,cis‐12,cis‐15 18:3 in incubates decreased significantly in cultures with heated soybeans, especially at 150°C, suggesting that this partial protection of polyunsaturated fatty acids (PUFA) from BH was at least in part linked to the aldehyde content of the heated soybeans. Practical applications: Oilseeds given to ruminants are often heated, and heat treatment is known to generate oxidation products. Knowing what oxidation products influence ruminal biohydrogenation of unsaturated fatty acids could result in technological processes allowing a better transfer of unsaturated fatty acids from oilseeds to ruminant products.     

Evaluation of calibration methods for a helicopter-borne microwave scatterometer

The French frequency modulated continuous waves (FMCW) scatterometer ERASME mounted on small helicopter or aircraft has been designed as dualfrequency (C and X bands) and dualpolarization (HH, VV) to investigate simultaneously the vegetation and the soil responses in radar backscattering. It is operated as a forward looking radar with a large elevation beamwidth (± 10° at 3 db) to observe easily the same surface target over a large range of incidence angles during a single flight. By this ability, ERASME is a complementary research tool for intercalibration of airborne and spaceborne imaging Synthetic Aperture Radars like Radarsat and ASAR and has to be well calibrated in every configuration, both absolutely and relatively for comparisons at different incidence angles.

This paper evaluates different calibration methods to be applied to such an instrument. Absolute calibration within 1 dB is easily obtained by external calibration using metallic corner reflectors. But this method remains insufficient to get the antenna elevation aperture which is essential on natural distributed targets for antenna pattern correction, due to the severe constraint of a narrow azimuthal beam and flight parameters (pitch, roll, altitude) varying quickly in time and range.

The external calibration is strongly improved by using a statistical analysis of data obtained over natural targets which analyses the correlation between the processed data and the recorded flight parameters. This method appears promising, but its application on natural targets with random variations need specific statistical properties of the data set. It is operative for high antenna setting (here 38° incidence angle) and mostly over bare soils, with low of σ⁰ variances and σ² correlation length of the order of the correlation length of pitch. It provides the aperture range around the antenna axis and an accuracy of 0.5 dB upon erσ⁰ is achieved providing the antenna pattern correction are done.     

Experimental and numerical investigation of a phase change material: Thermal-energy storage and release

The application of phase change materials (PCMs) for solar thermal-energy storage capacities has received considerable attention in recent years due to their large storage capacity and isothermal nature of the storage process. This study deals with the comparison of numerical and experimental results for a PCM conditioned in a parallelepipedic polyefin envelope to be used in passive solar walls. The experimental results were obtained by use of a genuine set-up involving heat flux sensors and thermocouples mounted on two vertical aluminium exchanger plates squeezing the samples. Numerical predictions were obtained with a custom one-dimensional Fortran code and a two-dimensional use of Fluent. Both methods showed a very good agreement with experimental observations for the melting process (?5%). However during solidification, both numerical codes failed to predict the phase change process accurately, the maximal relative error was as high as 57% (with an average of 8%).