Preliminary model of the Ribeira Grande geothermal field (Azores Islands)

On the basis of a geological - volcanological - geophysical survey, integrated with petrological and geochronological data, a structural model, including a shallow magmatic body, was defined for the Ribeira Grande area, Sao Miguel island (Azores). Two series of production tests were carried out in the Pico Vermelho 1 and Ribeira Grande 1 wells, which led to a preliminary definition of the deep fluid circulation. The data obtained from these studies were used to reconstruct a preliminary model of the Ribeira Grande geothermal field.     

Comparative Rheomechanical and Adhesive Properties of Two Hydrocolloid Dressings: Dependence on the Degree of Hydration

Hydration is believed to modify the mechanical properties (resistance to stress) and the rheological (viscoelastic) properties of hydrocolloid dressings. Rheomechanical properties in turn influence adhesional properties. In this work the relationships between the degree of hydration and the rheomechanical and the adhesive properties of two different commercial dressings (regular and nondispersive) were investigated. The two dressings showed different hydration characteristics. The regular dressing takes up water rapidly and tends to reach saturation after 12 hr. As the dressing swells and loses its integrity there is an accompanying reduction of both rheomechanical and adhesive properties. The nondispersive dressing exhibits a linear water uptake profile over extended periods of hydration up to 4 days. It does not swell and its rheomechanical and adhesive properties remain unchanged after hydration, The comparative evaluation of the results obtained with the various methods points to the relevance of mechanical and viscoelastic properties to the functionality assessment of dressings.     

The combined use of ultrasound and densitometry in the prediction of vertebral fracture

Measurement of ultrasonographic parameters provides information concerning not only bone density but also bone architecture. We investigated the usefulness of ultrasonographic parameters and bone mineral density for evaluating the probability of vertebral fracture. 397 postmenopausal women (59.1 +/- 6.0 years) with (n = 178) or without (n = 219) atraumatic vertebral fractures were studied. In all women, bone mineral density (BMD) of the lumbar spine was evaluated by dual X-ray absorptiometry (DXA) and speed of sound (SOS); broadband ultrasound attenuation (BUA) and Stiffness in the calcaneus were evaluated by an Achilles unit (Lunar Corporation). Ultrasonographic parameters and BMD were compared by examining the magnitude of the odds ratios, to determine which produces the highest estimate of the probability of odds of fracture, and by examining widths of the respective confidence intervals (CI) to show which estimate of odd ratio is the most precise. The relative risk of vertebral fracture, after adjusting for potential confounders, was 3.5 (CI 2.6-4.8) for BUA; 4.5 (CI 3.2-6.2) for SOS; 5.8 (CI 4.0-8.4) for Stiffness and 7.5 (CI 4.8-11.5) for BMD. Ultrasound (US) parameters were still significant independent predictors of vertebral fracture, even after adjusting for BMD. The relative risk of fracture for a simultaneous decrease by 1 SD of BMD and by 1 SD of each ultrasound parameter was 17.3 (CI 9.4-39.6) for BMD and SOS; 18.3 (CI 8.4-30.6) for BMD and BUA and 22.1 (CI 8.9-52.7) for BMD and Stiffness. Our data suggest that US and BMD provide complementary information which can be combined to improve estimates of vertebral fracture risk.     

From hospital to municipal cogeneration systems: an Italian case study

A mixed integer linear programming model combined with a more traditional design by scenarios is proposed to optimize facilities size and operation mode of a municipal energy system involving significant civil centres and a hospital. Moving from the need of a new heat and power station for the local hospital due to the construction of new pavilions, the opportunity of involving other centres in the neighbourhood in a distributed cogeneration system is analysed, increasing system complexity step by step. Smaller cogeneration units tailored to hospital needs are rewarding ventures with relatively low risks but, in a country whose traditional power generation systems heavily rely on fossil fuels and where energy policy and market conditions can make it profitable to sell surplus power, district heating systems foster the installation of larger cogenerators and lead thereby to higher profits and to better performance as for primary energy savings and greenhouse gases emission reduction. Copyright © 2006 John Wiley & Sons, Ltd.     

Robust control of permanent magnet motors: VSS techniques lead tosimple hardware implementations

It is shown how very simple velocity-tracking robust controllers for permanent magnet motors driving nonlinear loads can be designed based on variable structure systems techniques. Very fast dynamics, accurate and robust velocity-tracking are achieved with very simple hardware components without resorting to powerful digital signal processors and related interface hardware. A cascade control structure is used to ensure maximum flexibility. The controller for a DC motor is considered in great detail. Extension to AC synchronous PM motors is also presented. At the different control levels robustness is addressed with specific algorithms and the simplest solution is always selected. The controller architecture for both DC and AC synchronous motor are presented and discussed in the paper. Experimental results related to the control of a DC motor driving a nonlinear load are also shown. They demonstrate feasibility and excellent performances of the proposed approach     

Investigation of the nucleation and growth mechanisms of nanocrystalline diamond/amorphous carbon nanocomposite films

Nucleation and growth, but especially the development of the morphology of nanocrystalline diamond/amorphous carbon (NCD/a-C) nanocomposite films have been investigated by systematic variation of three important parameters, namely the deposition time, the growth rate, and the substrate pre-treatment used to enhance the nucleation density. The films have been characterized, among others, by scanning electron microscopy, atomic force microscopy, and Fourier transform infrared spectroscopy. It is shown that, by successive addition of ultradispersive diamond powder to the suspension of nanocrystalline diamond powder in n-pentane used for the ultrasonic pre-treatment, the nucleation density can be enhanced by two orders of magnitude from 1 · 10⁸ cm^− 2 to > 1 · 10¹⁰ cm^− 2. This reduces the thickness required to achieve closed films from 1 µm to 100 nm. However, once coalescence of the individual nodules emerging from the nucleation sites has taken place the films loose “memory” of the nucleation step and start to develop the typical NCD morphology consisting of larger features with diameters of some hundreds of nm which are in turn composed of much smaller features. Irrespective of the feature size and of the parameters used, the films of this investigation possess AFM rms roughnesses of 9–13 nm, indicating that rms values are not sufficient to characterize NCD surfaces.     

Sequential intraluminal endoscopic and laparoscopic treatment for bile duct stones associated with gallstones

BACKGROUND: On the basis of a flowchart including prior or current jaundice or pancreatitis, abnormal liver function, ultrasound or IV cholangiography, bile duct (BD) stones were suspected in 71/593 patients referred for gallstones. METHODS: When endoscopic retrograde cholangiography detected BD stones, endoscopic sphincterotomy (ES) and endoscopic BD clearance were attempted, followed by laparoscopic cholecystectomy (LC). BD stones were found in 44/71 patients. The sensitivity values of preoperative conditions were: 92% for IV cholangiography, 88% for abnormal liver function, 50% for ultrasound, and 37% for jaundice at admission. RESULTS: Endoscopic clearance succeeded in 37 patients and LC was completed in 33 patients. Conversion to open surgery (9%) was comparable with the rate in patients without BD stones. The median hospital stay for the sequential endoscopic and laparoscopic treatments was 13 days (range 4-54) or 22 days if open surgery was used. CONCLUSIONS: In conclusion, BD stones can be endoscopically cleared preoperatively in most patients without interfering with LC.     

Hepatic damage produced by long-term alcohol consumption in well-nourished rats

A study of the effect of long-term alcohol consumption on the liver of well-nourished rats is described. Rats fed for 16 weeks on a semipurified diet supplemented with high levels of vitamins and lipotropic factors and alcohol corresponding to 35% of the total caloric intake developed marked fatty changes of the liver. Mild fatty changes were observed in pair-fed controls receiving as isoenergetic equivalent of sucrose instead of alcohol. Intracellular hyaline bodies, corresponding ultrastructurally to giant mitochondria were abundantly found in the hepatocytes of alcoholic rats, while in the controls they were not seen. Te findings in this investigation are postulated to provide further evidence that the long-term intake of alcohol exerts a direct causative role in the pathogenesis of liver damage.     

Modification of oxidizing activity of Thiobacillus ferroxidans by some particulate solids

Different particulate solids such as glass powder, various types of activated carbon and bentonite suspended in Thiobacillus ferrooxidans cultures produce very different effects on the oxidizing activity of the microorganism. The atmospheric oxygen uptake by Thiobacillus ferrooxidans in Warburg respirometer flasks containing 9K medium with ferrous sulfate as energy source and suspended bentonite is 2.8 times that in the absence of solids. The dissolution rate of pure pyrite in 250 cm³ shake flasks containing 9K medium and bentonite is considerably enhanced over that where the only solid phase is pyrite. Conversely, the oxidizing ability of the microorganism seems to be inhibited by all the activated carbons tested. The effect of ground glass seems to be related to its particle size distribution. Implications for the bioleaching of sulfide ores and coal pyrite are discussed in the light of current knowledge on the adsorption of Thiobacillus ferrooxidans cells on solid surfaces.