排序方式: 共有26条查询结果,搜索用时 15 毫秒
1.
2.
应用电导率法研究了TritonX-100/正戊醇/环己烷体系中各组分及条件对微乳液最大增溶水量的影响。结果表明:当表面活性剂TritonX-100用量为3ml,助表面活性剂选正戊醇用量为1ml,环己烷为油相,温度为48℃,Ca(NO3)2溶液与(NH4)2HPO4溶液分别为0.24和0.14mol/L时,体系增溶水量最大,可得到较高产率的纳米羟基磷灰石。并且用XRD和TEM手段对产物进行了表征。 相似文献
3.
根据井径仪推靠器的机械几何结构,计算出了推靠臂径向上的运动与推靠拉杆轴向上的运动之间的非线性关系.用此非线性方法对仪器刻度,使得国产连斜-井径并测仪的井径线性不好的问题得到了明显改善. 相似文献
4.
5.
采用熔融制样,以粘土和炉渣等国家标准样品为校准标样测定了煤矸石中TFe、SiO2、CaO、MgO、Al2O3和TiO2的含量,结果显示,由于该方法可以完全消除不同产地煤矸石的矿物效应和粒度效应,准确度很好,可完全替代化学湿法分析,作为煤矸石分析的常规方法. 相似文献
6.
In order to improve the corrosion resistance of magnesium lithium alloy, Mg-14 Li alloy with different content of Ca(0, 3, 5, 10 wt.%) was prepared with a induction melting furnace. Electrochemical test and corrosion test were carried out in NaCl solution with different Cl~-concentrations. The results indicate that the microstructure of the Mg-14 Li alloy with Ca consists of dendritic β phase and eutectic structure(β+CaMg_2). With the increase of Ca addition from 0, to 3, 5, 10 wt.%, the corrosion resistance of the Mg-14 Li alloy initially increases first and then decreases, and that of alloy with 3% Ca is the best. Therefore, the corrosion resistance of Mg-14 Li alloy in NaCl solution can be effectively improved by adding proper amount of Ca. In addition, the concentration of Cl~-was one of important factors affecting the corrosion resistance of the Mg-14 Li alloy, and the influence of Ca was slighter than that of Cl~-. 相似文献
7.
利用OM、SEM、XRD及力学性能测试,研究Sb含量对Mg6ZnYZrxSb合金铸态组织及性能的影响。结果表明:添加Sb可以使晶界处网状连续组织变为颗粒状,并且随着Sb含量增加,颗粒的体积分数增加。低Sb含量合金的铸造组织由α-Mg、富锌相、共晶组织(α-Mg+I相)和YSb组成;随着Sb含量的增加,I相逐渐消失,Mg3Sb2和二元共晶Mg4Zn7开始出现。起初合金的拉伸强度和延伸率随Sb含量的增加而提高,而当Sb含量过大时,合金的综合力学性能下降。 相似文献
8.
以蔗糖为校准样品,采用红外吸收法测定碳铁中的碳含量。对实验数据进行线性回归,结果表明,测量允许差小于0.4%,能够满足碳铁的日常分析要求。 相似文献
9.
10.