Anodic passivity of glassy Ni83B17 alloy in sulphuric acid

The anodic passivation of Ni₈₃B₁₇ glassy was investigated in sulphuric acid solutions with respect to the degree of proton hydration and the structure of acid. The possibility of passivation in methanolic solutions of sulphuric acid was also examined. The investigations involved electrochemical measurements, XPS and sulphur dioxide analyses. When acid concentration is low, the passivity of Ni₈₃B₁₇ is a result of the formation of an oxide layer in the presence of “free” water molecules (i.e. not bound to protons). In concentrated sulphuric acid, the passivation may occur as a result of the oxidative ability of acid connected with S⁶⁺ ion reduction. At intermediate acid concentrations a mixed salt-oxide layer is formed. The passivity of Ni₈₃B₁₇ was also observed in methanolic solutions of sulphuric acid, as a result of the oxidising ability of the acid.     

Cytochemical localization of acetylcholine receptors at the neuromuscular junction by means of horseradish peroxidase-labeled alpha-bungarotoxin

The cytochemical localization of acetylcholine (ACh) receptors at the neuromuscular junction was investigated with a procedure utilizing alpha-bungarotoxin (alpha-BtX) labeled directly with horseradish peroxidase (HRP). Following incubation of tissues in the conjugate and reaction for peroxidase, activity was observed on the junctional folds of the motor endplate. A uniform layer of reaction product approximately 15 nm thick occurred over the apical portions of the junctional folds. Membranes at the bases of the synaptic cleft showed only small amounts of reaction product. Non-junctional regions of the muscle fiber were unreactive. Activity was also observed in the membrane of the axon facing the muscle surface, often including the axolemma overlying the "active zones" of the nerve terminal. Such presynaptic activity was still evident on nerve terminals disjuncted from the synapse by enzymatic treatment prior to incubation in the conjugate. This localization indicates the possible presence of presynaptic ACh receptors within the axolemma. In muscle denervated for 7-12 days, motor endplates were reactive and parajunctional sarcolemma showed slight activity, but most extrajunctional regions contained no obvious accumulations of reaction product. Activity at all sites was prevented by preincubation of tissues in native alpha-BTX prior to incubation in the conjugate and reaction for HRP. This procedure represents a simple and convenient method for the high resolution localization of ACh receptors.     

Iron enhances generation of fibrin fibers in human blood: Implications for pathogenesis of stroke

Stroke is associated with the intracerebral formation of fibrin clots which may lead to irreversible brain damage. Thrombolytic therapies employ a variety of natural and/or recombinant plasminogen activators to initiate fibrinolytic degradation of cerebral thrombi. However, such therapies when installed beyond 4‐ to 6‐h window, may fail to achieve the expected outcome. This is due to the hydroxyl radical‐induced modification of fibrin(ogen) molecules rendering them refractory to fibrinolytic degradation, but no cause of the increased free radical generation in stroke was offered. Here, we show by means of electron microscopy that iron ions added to human blood dramatically enhances fibrin fibers formation with thrombin, and significantly delays fibrinolysis during spontaneous clotting of native blood. Iron ions caused the appearance dense matted fibrin deposits, similar, if not identical, to those observed in plasma of patients with stroke. These results may explain a known relationship between thrombotic diseases and the increased body concentrations of free iron and/or hemoglobin derivatives. We conclude that any action resulting in the inhibition of hemostatic abnormalities, as well as in the reduction of body free iron and scavenging of hydroxyl radicals (e.g., by polyphenols) can potentially prevent pathological reactions associated with consequences of stroke. Microsc. Res. Tech. 75:1185–1190, 2012. © 2012 Wiley Periodicals, Inc.     

Studies in Carbohydrate Based Glues and Thickeners for Foodstuffs. Part I: Glucose - Sucrose - Apple Pectin Ternary System

Viscosities are given of aqueous solutions of α-D-glucose, sucrose, apple pectin and Arabic gum, as well as of various binary mixtures of these solutions. Aqueous mixtures of α-D-glucose and sucrose exhibit a small increase in viscosity. The addition of apple pectin to the binary mixtures gives solutions of a viscosity of Arabic gum.     

Time-resolved fluorescence microspectroscopy for characterizing crude oils in bulk and hydrocarbon-bearing fluid inclusions

Time-resolved fluorescence data was collected from a series of 23 bulk crude petroleum oils and six microscopic hydrocarbon-bearing fluid inclusions (HCFI). The data was collected using a diode laser fluorescence lifetime microscope (DLFLM) over the 460-700 nm spectral range using a 405 nm excitation source. The correlation between intensity averaged lifetimes (tau) and chemical and physical parameters was examined with a view to developing a quantitative model for predicting the gross chemical composition of hydrocarbon liquids trapped in HCFI. It was found that tau is nonlinearly correlated with the measured polar and corrected alkane concentrations and that oils can be classified on this basis. However, these correlations all show a large degree of scatter, preventing accurate quantitative prediction of gross chemical composition of the oils. Other parameters such as API gravity and asphaltene, aromatic, and sulfur concentrations do not correlate well with tau measurements. Individual HCFI were analyzed using the DLFLM, and time-resolved fluorescence measurements were compared with tau data from the bulk oils. This enabled the fluid within the inclusions to be classified as either low alkane/high polar or high alkane/low polar. Within the high alkane/low polar group, it was possible to clearly discriminate HCFI from different locales and to see differences in the trapped hydrocarbon fluids from a single geological source. This methodology offers an alternative method for classifying the hydrocarbon content of HCFI and observing small variations in the trapped fluid composition that is less sensitive to fluctuations in the measurement method than fluorescence intensity based methods.     

Treatment of distal biceps tendon injuries using the Boyd and Anderson method

Boyd and Anderson method for treatment of injury to the distal part of the biceps tendon has been recalled. The method has been used in 5 males aged 38-47 (mean 41) with good final functional results.     

Investigations on electrochemical α-methoxylation of selected dipeptides

Voltamperometric studies on the indirect electrochemical α-methoxylation of Boc-Pro-Gly-OMe and Boc-Val-Gly-OMe in MeOH in the presence of NaCl or NaBr as the mediator suggested that the first reaction step was a direct N-halogenation of the dipeptide by active chlorine or bromine adsorbed on the electrode surface. The kind of mediator (NaCl or NaBr), its concentration, the current density, and the applied electric charge had a significant influence on the reaction course. In the case of Boc-Pro-Gly-OMe, the use of sodium bromide was necessary to obtain a relatively high ratio of α-monomethoxylation to α,α-dimethoxylation. For Boc-Val-Gly-OMe, the selectivity for α-monomethoxylation was close to 100%, independently of the mediator. Optimisation of the selected electrolysis parameters allowed us to significantly improve the yield and selectivity of the α-methoxylation of Boc-Pro-Gly-OMe (Kardassis et al. Tetrahedron 54:3471, 1998) and to obtain good results in the α-methoxylation of Boc-Val-Gly-OMe.     

Latex allergy in health services workers

The studies were performed in 20 workers from the Health Service (13 women and 7 men in the age 25-57) suffering from hand urticaria (6 persons) and hand dermatitis (14 persons) suspected of the allergy to latex gloves. In all patients the familial and personal predispositions to allergy were evaluated by the anamnesis, the estimation of total IgE serum level and the skin prick tests (SPT) with inhalant allergens. The latex allergy was diagnosed by SPT and contact test with standardized extract of the natural latex allergen in the concentration 1000 PNU/ml (Nexter-Allergopharma) and by estimation of specific to latex IgE serum level. In addition to this, contact tests with glove's material as well European standard contact allergens (Hermal) were done and the one with antiseptic substances to which the patient was exposed at his work. The allergy type I to latex gloves was confirmed in all 6 cases with contact urticaria. The SPT with standard extract of the natural latex was more valuable than latex specific IgE in the serum. Contact allergy (type IV) to latex gloves was confirmed in 10 from 14 suspected cases. In the next 4 the allergy to antiseptic substances was the reasons of the illness. The allergy to latex gloves appears more often in women. No case showed the familial predisposition to allergy and only 4 patients additionally suffered from the allergy to pollen and mites. Moreover in both groups of patients we showed the presence of the additional contact allergy to different allergens (to metals and antiseptic substances).     

Characterization of corticotropin-releasing hormone (CRH) in human skin

We have confirmed the expression of CRH and CRH receptor type 1 genes in human skin, cultured HaCaT keratinocytes, squamous cell carcinoma, and melanoma cells. The size of CRH messenger ribonucleic acid (mRNA), estimated by Northern blot hybridization, was 1.5 kilobases. CRH peptide was identified by reverse phase high pressure liquid chromatography separation in both whole skin and cultured cells. Forskolin and dexamethasone at concentrations of 10 micromol/L stimulated and inhibited, respectively, CRH peptide production in squamous cell carcinoma and melanoma cells, but had no significant effect on the CRH mRNA level. In melanoma cells, stimulation of melanogenesis down-regulated CRH receptor type 1 mRNA expression, but was without effect on CRH mRNA production. We suggest that in human skin the CRH signaling system is both operative and under regulatory control.     

Interface growth morphologies in pulsed laser deposited, room temperature grown multilayer hard coatings

The mechanical behaviour - hardness, elasticity, and adhesion - of multilayer coatings is strongly influenced by the type of the formed interfaces between the different layers. In industrially applied tribological coatings the interface region is predominantly not a perfect sudden change of the chemical composition of the adjacent crystal planes, but a transition zone of a thickness, which is strongly dependent on the energetic conditions during deposition. Multilayer coatings grown by high-energetic deposition techniques always struggle with high atomic mixing of both adjacent coating materials due to high energetic ion implantation.One of these high-energetic deposition techniques is the Pulsed Laser Deposition (PLD), characterized by pulsed and within one pulse alternating high- and low-energetic particle fractions, hitting successively the substrate surface. Such deposition conditions were shown to be highly advantageous for low temperature deposition by the densification of the growth structures due to activated diffusion and re-sputtering, but increases the difficulty in depositing multilayer structures.The current paper addresses these specific growth conditions based on Ti/TiN and Cr/CrN multilayer coatings. High resolution transmission electron microscopy results show that the atomic mixing at the interface is not highly critical for the deposition of multilayer coatings and that extremely dense growth structures are forming even in the interface regions.