Plasma power can make better powders

It may be a truism to say that round powders pack better, but spheroidisation of powder particles is one of the successful commercial applications of induction plasma technology and can play a key role in substantial improvement of powder quality and fluidity…     

Helicobacter pylori: the mouth, stomach, and gut axis

The aim of this study was to identify the natural reservoir and route of transmission of Helicobacter pylori infection. Two hundred eight (208) dyspeptic patients (114 males, 94 females; peak age of cohort, 50-59.9) were recruited. Specimens were collected from saliva, supra- and subgingival dental plaque, tongue scrapings, and oropharyngeal swabs. At subsequent endoscopy, gastric antral biopsy was performed for the rapid urease test (RUT), microbiological culture, and, in some patients, histology. Gastric juice samples were aspirated, and in 50 patients duodenal aspirate was collected. Polymerase chain reaction (PCR) with primers targeted to the 16S rRNA sequence of H. pylori was also employed for each of the specimens. In those patients where H. pylori was detected from multiple sites (dental plaque, gastric juice, gastric biopsy, and duodenal aspirate), restriction endonuclease digestion with Hae III was performed to determine if they were epidemiologically linked. The results indicated that 15/208 patients (7%) tested positively for H. pylori by PCR in dental plaque; only 2 samples were positive by culture. In none of the other oral sites sampled was H. pylori detected by any test used in the study. Gastric juice and gastric biopsy specimens from 36/ 208 patients (17%) and 114/208 patients (55%), respectively, were positive by PCR. Duodenal aspirate from 6/50 patients (12%) also tested positively by PCR. All specimens tested by restriction endonuclease digestion with Hae III (15/15 patients) were positive in both antral biopsy and gastric juice specimens, as well as 5 specimens from the duodenal aspirate. Four of the dental plaque strains had restriction patterns similar to those of the stomach and duodenal sites, providing evidence that these sites were infected with the same strain of H. pylori. In conclusion, the results suggest that H. pylori selects the gastric mucosa as its preferred site. The detection in dental plaque could indicate that the oral cavity may act as a reservoir or sanctuary for the organism. Whether H. pylori is a resident or transient oral microorganism is still unclear, although it is more likely to be transient in nature.     

Processing of an East Mediterranean phosphate ore sample by an integrated attrition scrubbing/classification scheme (part one)

ABSTRACT

In this study, an Egyptian siliceous/calcareous sedimentary phosphorite was subjected to beneficiation by unsophisticated economic means. The mineralogical and chemical examination showed that the ore sample is a typical example for the East Mediterranean phosphorites with 21.80% P₂O₅, 10.93% acid insoluble and 16.61% loss on ignition. The primary crushed sample was classified into three size fractions without any milling and they were separately subjected to an integrated attrition scrubbing study. Screening and classification on the 2.30 mm and 0.071 mm sieves were sequentially introduced with the attrition process. The effect of solid%, attrition speed and time were studied and optimized for each size fraction. Results showed that three products were produced and could be categorized according to their P₂O₅ content into the coarse tailing (+2.30 mm), the attrition concentrate (?2.30 + 0.071 mm) and the phosphate fines (?0.071 mm). The P₂O₅ contents of these products reached 12.24%, 28.72% and 18.77%, with P₂O₅ distribution reached 6.74%, 51.75% and 41.51%, respectively. A global P₂O₅ of 28.72% was obtained with a recovery of about 52%. A tentative flow-sheet for the whole process was postulated.     

On the induction plasma deposition of tungsten metal

The central particle injection and long residence time characteristics of induction plasma have given rise to the complete melting of tungsten particles injected into an Ar- H₂ plasma under soft vacuum conditions. The influences of process variables such as power level, chamber pressure, and spray distance on splat morphology, apparent density, and deposition efficiency have been studied. Dense tungsten deposits with no oxidation have been obtained. Scanning electron microscopy (SEM) micrographs reveal a well-flattened lamellar structure in deposits. Radiative cooling is observed to play a significant role in the plasma spraying of this refractory metal.     

Remaining Fatigue Life Assessment of Plasma Sprayed Thermal Barrier Coatings

Ceramic functional coatings are frequently applied to structural materials, covering a wide range of thermomechanical and electrochemical applications. The main limiting feature is their reliability when subjected to cyclic transient thermal stresses. The study described in this article is a continuation of earlier research study focused on acoustic emission (AE) monitoring of the thermomechanical aging effects in ceramic coatings. Here, emphasis is placed on the usefulness of combining AE short-term monitoring with finite element modeling (FEM) to predict the performance of such coatings when subjected to cyclic thermal loads. The FEM study presented in this article is based on a three-dimensional, time-dependent approach, of the stress fields that developed within the coatings during the post-deposition cooling step and the thermal cycling. Experiments were conducted using yttrium-stabilized zirconia (YSZ) and Alumina (Al₂O₃) ceramic coatings combined with a NiCr-based intermetallic bond coat.     

Natural ageing of tri-layer polyethylene film: Evolution of properties and lifetime in North Africa region

The effects of natural ageing in the north Algeria of tri-layer films lay down hot greenhouse made of low-density polyethylene are presented in this work. Ageing was monitored by observing the changes of physical, mechanical and structural effects on the various greenhouse faces. It has been shown that the structural change occur on the outside face of the films, while the inside faces are protected by the dye. The study shows that the measured parameters are directly related to the criteria of evaluation of the greenhouse effectiveness. The lifetime of these films under natural conditions in north Algerian was estimated to be 10 months.     

Detection of free malignant cells in the peritoneal cavity before and after resection of colorectal cancer

PURPOSE: This study was designed to select the best monoclonal antibody to stain malignant cells in peritoneal wash fluid, and to investigate the incidence of free malignant cells in preresection and postresection colorectal cancer peritoneal washings using a combination of conventional cytology and immunocytochemistry. METHODS: Peritoneal washings were taken from 35 consecutive patients undergoing colorectal cancer resection. RESULTS: Malignant cells were isolated on a density gradient and identified by conventional cytology and an indirect immunoperoxidase stain. Malignant cells were identified in peritoneal washings from 15 patients (preresection only n = 3, postresection only n = 4, both n = 8). The origin of free malignant peritoneal cells in 11 preresection-positive washings must be the serosa. The origin of these cells in the four postresection-positive patients is uncertain: serosal and luminal spillage were considered unlikely and no circulating cells were found in the mesenteric vessels near the tumor. CONCLUSION: Tumor cells may have leaked out from lymphatics cut during the dissection.     

Energy balance for a DC plasma torch

A study was made of the energy utilization efficiency in a d.c. plasma toich operating with argon at atmospheric pressure at a power level of 10-25 kW. Calorimetric measurements of the energy lost to the cathode, anode and that remaining in the plasma jet showed that the torch efficiency was about 40 to 50%. It increases with an increase of the plasma gas flow rate but decreases with an increase of the current intensity. The electrode spacing was found to have no significant influence on the efficiency over the range investigated. The torch efficiency could be substantially improved by a reduction of the anode size. The addition of small concentrations of a diatomic gas such as nitrogen improved the efficiency to about 65% and increased the total power dissipated in the torch.     

Characterization and mineral beneficiation of Egyptian glauconite for possible industrial use

A thorough characterization of a glauconite sample collected from a core drilled on the southeast edge of the Abu Tartur Plateau in the Western Desert of Egypt was carried out. The sample, which represents the upper part of the Campanian Duwi Formation, was examined using a petrographic polarizing microscope as well as X-ray diffraction and X-ray fluorescence methods. The magnetic behavior of the different size fractions was tested using a Frantz isodynamic separator prior to the beneficiation process. This process was conducted by both magnetic separation, using an Eriez rare earth roll magnetic separator, and heavy liquid gravity methods during the search for a higher grade of K₂O. A correlation between the mineral composition and magnetic behavior of the particles was shown. Two potassium oxide concentrates were obtained, having 6.8 and 6.22% K₂O, from an original sample containing 4.41% K₂O by weight. A blend of both products yielded a product having 6.42% K₂O with an overall recovery of 41.5%, which may satisfy the requirement of a natural fertilizer. The association of this product with phosphate and pyrite will help to remediate alkaline soils. In addition, a sulfur-rich coproduct containing 11.32% S with a recovery of 31.6% was obtained.     

Amyloid Fibrils Aerogel for Sustainable Removal of Organic Contaminants from Water

Water contamination by organic pollutants is ubiquitous and hence a global concern due to detrimental effects on the environment and human health. Here, it is demonstrated that amyloid fibrils aerogels are ideal adsorbers for removing organic pollutants from water. To this end, amyloid fibrils prepared from β‑lactoglobulin, the major constituent of milk whey protein, are used as building blocks for the fabrication of the aerogels. The adsorption of Bentazone, Bisphenol A, and Ibuprofen, as model pollutants, is evaluated under quasi-static conditions, without use of energy or pressure. Through adsorption by amyloid fibrils aerogel, excellent removal efficiencies of 92%, 78%, and 98% are demonstrated for Bentazone, Bisphenol A, and Ibuprofen, respectively. Furthermore, the maximum adsorption capacity of amyloid fibrils aerogel for Bentazone, Bisphenol A, and Ibuprofen is 54.2, 50.6, and 69.6 mg g⁻¹, respectively. To shed light on the adsorption equilibrium process, adsorption isotherms, binding constants, saturation limits, and the effect of pH are evaluated. Finally, the regeneration of the aerogel over three consecutive cycles is studied, exhibiting high reusability with no significant changes in its removal performance. These results point at amyloid fibrils aerogels as a sustainable, efficient, and inexpensive technology for alleviating the ubiquitous water contamination by organic pollutants.