Origin of significantly enhanced dielectric response and nonlinear electrical behavior in Ni2+-doped CaCu3Ti4O12: Influence of DC bias on electrical properties of grain boundary and associated giant dielectric properties

CaCu_3-xNi_xTi₄O₁₂ (x?=?0, 0.05, and 0.10) powders were synthesized using a solid state reaction method. Phase structure and microstructure analyses revealed that all sintered CaCu_3-xNi_xTi₄O₁₂ ceramics were of a pure phase. The CaCu₃Ti₄O₁₂ ceramics had a dense microstructure and grain sizes were enlarged by doping with Ni²⁺. Interestingly, the dielectric permittivity was significantly enhanced, whereas the loss tangent was greatly suppressed to ～0.046–0.034 at 1?kHz. All sintered ceramics exhibited non-Ohmic characteristics. Clarification of the influences of DC bias showed that the dielectric permittivity and loss tangent values were increased by DC bias. The resistance of grain boundaries and the associated conduction activation energy of CaCu_3-xNi_xTi₄O₁₂ ceramics were reduced as the DC bias voltage increased. Therefore, the observed non-Ohmic behavior and significantly enhanced dielectric properties should be closely related to variation in the Schottky barriers at the grain boundaries.     

Microperforation of Three Common Plastic Films by Laser and Their Enhanced Oxygen Transmission for Fresh Produce Packaging

Three different plastic films of biaxially oriented polypropylene (BOPP), biaxially oriented polyethylene terephthalate (BOPET) and low‐density polyethylene (LDPE) were perforated using Nd‐YAG laser. Effects of laser pulse energy were examined by varying energies from 50 to 250 mJ where the pulse duration and pulse repetition were kept constant at 10 ns and 1 Hz, respectively. It was found that perforation diameters of all films increased with increasing pulse energies. Observed perforations were different among the three film types. Explanation was contributed to material inherent property and its interaction with laser. Incorporation of an inorganic filler (i.e. silica based anti‐blocking agent used in packaging film) of 0.5 wt% into the LDPE films (0.5Si‐LDPE) could improve perforation performance for LDPE. This was attributed to an increased thermal diffusivity of the 0.5Si‐LDPE film. Commercial BOPET and BOPP films containing 97 microholes/m² (hole diameter of ~100 µm) showed an improvement in oxygen transmission rates (OTR) of 18 and 5 times that of the neat films without perforation. In the case of perforated 0.5Si‐LDPE films having similar perforations of 97 microholes/m² and perforation diameter of 100 µm, a two‐fold increase of OTR was obtained. Gas transmission rates of the microperforated films were measured based on the static method. Measured OTR and CO₂TR values of the three films with varying perforation diameters in a range of ~40–300 µm were compared and discussed. Overall results clearly indicate that perforation by laser is an effective process in developing breathable films with tailored oxygen transmission property for fresh produce packaging. Copyright © 2014 John Wiley & Sons, Ltd.     

Abnormal chromosome assessment of snakehead fish (Channa striata) affected by heavy metals from a reservoir near an industrial factory

This study aimed to investigate nine heavy metal concentrations (As, Cd, Cr, Pb, Cu, Fe, Zn, Mn and Ni) in water, sediment and snakehead fish (Channa striata) and to identify abnormal chromosomes in C. striata from a reservoir near an industrial factory and a reference area. Heavy metal concentrations were measured by inductively coupled plasma optical emission spectrometry (ICP-OES). The metal concentrations in the water, sediment and C. striata samples did not exceed the standard limit of Thailand, except for Cr concentrations, which exceeded water quality standards. The concentrations of Cd, Fe, Mn and Ni in C. striata samples between the reservoir and the reference area were significantly different (p < 0.05). The diploid chromosome number of C. striata from both areas was (2n = 42). Eight types of abnormal chromosomes were identified and classified as a single-chromatid gap, a single-chromatid break, centric fragmentation, a centric gap (CG), fragmentation, deletion, single-chromatid decomposition and iso-arm fragmentation. The most frequent abnormal chromosome in the samples was CG. The percentages of abnormal chromosomes in the C. striata samples from the reservoir near the industrial factory and the reference area were significantly different (p < 0.05) at 8.44 and 1.20, respectively.     

Utilization of cool ceiling with roof solar chimney in Thailand: The experimental and numerical analysis

The objective of this paper is to study the benefits of application of solar chimney on the south roof and cool metal ceiling on the north roof through the experiment in a detached building called a controlled cell, and the related numerical model constructed from a computational fluid dynamics (CFD) program. The experimental results are used for calculation of values of heat transfer coefficient of the cool ceiling and evaluation of the mean cooling potential of the combined passive cooling system. The two-dimensional numerical models generated by the CFD program use the mean values of wall temperatures in the application of solar chimney in the controlled cell as the boundary conditions. The effects of cool ceiling on the temperature, velocity and airflow rate in the controlled cell are investigated through the numerical model in which the north ceiling temperature is reduced by 2–4 °C from the measured value of 32.8 °C. The mean cooling potential of the application of combined system is found to be two times higher than the application of the solar chimney. Good agreements between the predicted and experimental results are obtained from the comparison of temperature and volume flow rate at the middle section of the controlled cell. The reduction of north ceiling temperature in the free-convection numerical model shows the decrease of air temperature in the upper region of the room by 0.5–0.7 °C from the original value of 33.3 °C, and the increase of volume flow rate by 12%.     

Three-dimensional touch interface for medical education.

We present the technical principle and evaluation of a multimodal virtual reality (VR) system for medical education, called a touch simulator. This touch simulator comes with an innovative three-dimensional (3-D) touch sensitive input device. The device comprises a six-axis force-torque sensor connected to a tangible object representing the shape of an anatomical structure. Information related to the point of contact is recorded by the sensor, processed, and audiovisually displayed. The touch simulator provides a high level of user-friendliness and fidelity compared to other purely graphically oriented simulation environments. In this paper, the touch simulator has been realized as an interactive neuroanatomical training simulator. The user can visualize and manipulate graphical information of the brain surface or different cross-sectional slices by a finger-touch on a brain-like shaped tangible object. We evaluated the system by theoretical derivations, experiments, and subjective questionnaires. In the theoretical analysis, we could show that the contact point estimation error mainly depends on the accuracy and the noise of the sensor, the amount and direction of the applied force, and the geometry of the tangible object. The theoretical results could be validated by experiments: applying a normal force of 10 N on a 120 mm x 120 mm x 120 mm cube causes a maximum error of 2.5 +/- 0.7 mm. This error becomes smaller when increasing the contact force. Based on the survey results, the touch simulator may be a useful tool for assisting medical schools in the visualization of brain image data and the study of neuroanatomy.     

Cytotoxic effect of sodium arsenite on Nile tilapia (Oreochromis niloticus) in vivo

This study showed the relevance of using chromosomal aberration (CA) as potential indicators of sodium arsenite (SA; NaAsO₂) cytotoxicity. The study investigated cytotoxic potential of SA in Oreochromis niloticus using CA assessment. The fish were exposed to four different concentrations of SA (5, 10, 20 and 40 mg/L) for 24 hours in comparison to a control group. The As concentrations in the samples were analysed by inductively coupled plasma atomic emission spectrometry. The differences in As concentrations in the water and O. niloticus samples between the control and experimental groups were significant (p<0.05), whereas the within experimental group differences were not significant. The cytotoxic assessment of SA in O. niloticus revealed five types of CAs, including single chromatid gaps (SCG), single chromatid break (SCB), centric gap (CG), fragmentation (F) and deletion (D). The most common CA in the O. niloticus samples was SCG. A total of 2.33, 10.67, 18.67, 18.00 and 23.67% of the cells in the control and experimental groups exhibited CAs. The numbers of CAs and cells with CAs from the control and experimental groups of fish were significantly different (p<0.05); additionally, the fish exposed to 5 and 40 mg/L showed significant within experimental group differences (p<0.05).     

Evaluation of DTTV Transmission for SFN with Minimum Threshold in Thailand

Wireless Personal Communications - The digital terrestrial television (DTTV) transmission based on digital video broadcasting-terrestrial second generation (DVB-T2) for a single frequency network...     

Measurement and Modeling of DTTV–SFN Propagation in Thailand

Wireless Personal Communications - Digital terrestrial television (DTTV) with a single frequency network (SFN) in Thailand is based on digital video broadcasting-terrestrial second generation...     

Non‐Ohmic Properties and Electrical Responses of Grains and Grain Boundaries of Na1/2Y1/2Cu3Ti4O12 Ceramics

The dielectric and non‐Ohmic properties of Na_1/2Y_1/2Cu₃Ti₄O₁₂ ceramics sintered under various conditions to obtain different microstructures were investigated. Microstructure analysis confirmed the presence of Na, Y, Cu, Ti, and O and these elements were well dispersed in the microstructure. Na_1/2Y_1/2Cu₃Ti₄O₁₂ ceramics exhibited non‐Ohmic characteristics with large nonlinear coefficients of about 5.7–6.6 irrespectively of sintering conditions. The breakdown electric field of fine‐grained ceramic with the mean grain size of ≈1.7 μm (≈5600 V/cm) was much larger than those of the course‐grained ceramics with grain sizes of ≈9.5–10.4 μm (≈1850–2180 V/cm). Through optimization of sintering conditions, a low loss tangent of about 0.03 and very high dielectric permittivities of 18 000–23 000 with good temperature stability were successfully accomplished. The electrical responses of the grains and grain boundaries can, respectively, be well described using admittance and impedance spectroscopy analyses based on the brickwork layer model. A possible mechanism for the origin of semiconducting grains is discussed. The colossal dielectric response was reasonably described as closely correlated with the electrically heterogeneous microstructure by means of strong interfacial polarization at the insulating grain‐boundary layers. The non‐Ohmic properties of Na_1/2Y_1/2Cu₃Ti₄O₁₂ ceramics were primarily related to their microstructure, i.e., grain size and volume fraction of grain boundaries.