Microcalorimetry for characterization of film formation and cure of coatings and adhesives

A new microcalorimeter with eight parallel channels using robust, low cost sensors for characterization of coatings and adhesives is described and first experiments on coatings and adhesives are presented. The calorimetric sensors are based on thin glass plates (20 mm × 20 mm, thickness 150 μm) with heater and thermocouple sputtered on the surfaces (calorimetric active area of about 9 mm²). The setup allows heating and cooling experiments as well as isothermal measurements in the temperature-modulated mode with up to eight sensors in parallel. The measured quantities are the real (C^′_p) and imaginary part (C^″_p) of the complex heat capacity (), the related absolute value of the heat capacity () and the heat flow . An industrial computer (NI PXI system) with specific software for calibration and data recording controls the electronic components. Sensors can be embedded in a temperature controlled oven (heating and cooling by Peltier elements) or alternatively in a climatic cabinet with controlled temperature and humidity.

The method has been applied successfully to monitoring of film formation of aqueous polymer dispersions (styrene-acrylate copolymer) and curing of coatings.     

Figure-ground separation by cue integration

This letter presents an improved cue integration approach to reliably separate coherent moving objects from their background scene in video sequences. The proposed method uses a probabilistic framework to unify bottom-up and top-down cues in a parallel, "democratic" fashion. The algorithm makes use of a modified Bayes rule where each pixel's posterior probabilities of figure or ground layer assignment are derived from likelihood models of three bottom-up cues and a prior model provided by a top-down cue. Each cue is treated as independent evidence for figure-ground separation. They compete with and complement each other dynamically by adjusting relative weights from frame to frame according to cue quality measured against the overall integration. At the same time, the likelihood or prior models of individual cues adapt toward the integrated result. These mechanisms enable the system to organize under the influence of visual scene structure without manual intervention. A novel contribution here is the incorporation of a top-down cue. It improves the system's robustness and accuracy and helps handle difficult and ambiguous situations, such as abrupt lighting changes or occlusion among multiple objects. Results on various video sequences are demonstrated and discussed. (Video demos are available at http://organic.usc.edu:8376/ approximately tangx/neco/index.html .).     

Study on the replication quality of micro-structures in the injection molding process with dynamical tool tempering systems

The injection molding of micro-structures is a promising mass-production method for a broad range of materials. However, the replication quality of these structures depends significantly on the heat flow during the filling stage. In this paper, the filling and heat transfer of v-groove and random structures below 5 μm is investigated with the help of an AFM (atomic force microscope) and thermo couples. A numerical model is developed to predict the filling of surface structures during the filling and packing stage. The model implies the use of simple fully developed flow models taking the power-law material model into account. This permits investigation into which ways several processing parameters affect the polymer flow in the surface structures. The mold wall temperature, which has significant effects on the polymer flow, is varied by using a variothermal mold temperature control system to validate the model proposed.     

Artists portray human faces with the Fourier statistics of complex natural scenes

When artists portray human faces, they generally endow their portraits with properties that render the faces esthetically more pleasing. To obtain insight into the changes introduced by artists, we compared Fourier power spectra in photographs of faces and in portraits by artists. Our analysis was restricted to a large set of monochrome or lightly colored portraits from various Western cultures and revealed a paradoxical result. Although face photographs are not scale-invariant, artists draw human faces with statistical properties that deviate from the face photographs and approximate the scale-invariant, fractal-like properties of complex natural scenes. This result cannot be explained by systematic differences in the complexity of patterns surrounding the faces or by reproduction artifacts. In particular, a moderate change in gamma gradation has little influence on the results. Moreover, the scale-invariant rendering of faces in artists' portraits was found to be independent of cultural variables, such as century of origin or artistic techniques. We suggest that artists have implicit knowledge of image statistics and prefer natural scene statistics (or some other rules associated with them) in their creations. Fractal-like statistics have been demonstrated previously in other forms of visual art and may be a general attribute of esthetic visual stimuli.     

Barrier Trees on Poset-Valued Landscapes

Fitness landscapes have proved to be a valuable concept in evolutionary biology, combinatorial optimization, and the physics of disordered systems. Usually, a fitness landscape is considered as a mapping from a configuration space equipped with some notion of adjacency, nearness, distance, or accessibility, into the real numbers. In the context of multi-objective optimization problems this concept can be extended to poset-valued landscapes. In a geometric analysis of such a structure, local Pareto points take on the role of local minima. We show that the notion of saddle points, barriers, and basins can be extended to the poset-valued case in a meaningful way and describe an algorithm that efficiently extracts these features from an exhaustive enumeration of a given generalized landscape.     

Determination of Intra- and Extracellular Metabolic Adaptations of 3D Cell Cultures upon Challenges in Real-Time by NMR

NMR flow devices provide longitudinal real-time quantitative metabolome characterisation of living cells. However, discrimination of intra- and extracellular contributions to the spectra represents a major challenge in metabolomic NMR studies. The present NMR study demonstrates the possibility to quantitatively measure both metabolic intracellular fingerprints and extracellular footprints on human control fibroblasts by using a commercially available flow tube system with a standard 5 mm NMR probe. We performed a comprehensive 3D cell culture system characterisation. Diffusion NMR was employed for intra- and extracellular metabolites separation. In addition, complementary extracellular footprints were determined. The implemented perfused NMR bioreactor system allowed the determination of 35 metabolites and intra- and extracellular separation of 19 metabolites based on diffusion rate differences. We show the reliability and sensitivity of NMR diffusion measurements to detect metabolite concentration changes in both intra- and extracellular compartments during perfusion with different selective culture media, and upon complex I inhibition with rotenone. We also demonstrate the sensitivity of extracellular footprints to determine metabolic variations at different flow rates. The current method is of potential use for the metabolomic characterisation of defect fibroblasts and for improving physiological comprehension.