Liquid viscosities and densities of HFC-134a+glycol mixtures

Liquid viscosity and density of six binary mixtures of HFC-134a with glycols [ethylene glycol, diethylene glycol, triethylene glycol, polyethylene glycol (400), and polypropylene glycol (2000)] have been measured in the temperature range from 273 to 333 K. The viscosity was measured by a rolling-ball viscometer calibrated with standard liquids of viscosities and densities (JS5, JS10, JS20, and JS50). The density was measured with a glass pycnometer. The uncertainties of the measurements were estimated to be less than 3.4 % for viscosity and 0.04 % for density, respectively. An equation is given to represent the obtained viscosity values as a function of weight fraction and temperature.     

Modification of mesophase pitch by blending Part 2 Modification of mesophase pitch fibre precursor with thermoresisting polyphenyleneoxide (PPO)

Polyphenyleneoxide was blended in amounts of 5 or 10 wt% into petroleum-derived mesophase pitch to reinforce the pitch fibre before the oxidative stabilization to achieve better handling properties. Although polyphenyleneoxide was fusible but hardly soluble in the mesophase pitch even at a spinning temperature of 350° C, blended pitch could be smoothly spun into pitch fibre 10m diameter, as could the parent pitch. Fibrous polyphenyleneoxide of less than 1m diameter was homogeneously dispersed in the pitch fibre, being arranged along the fibre axis. Such fibrous polyp henyleneoxide reinforced the pitch fibre considerably. The fibrous substances at the centre of the fibre disappeared in the carbonized fibre at 1300° C after oxidation at 250° C, although some short ones were observed in the skin region of the fibre, suggesting that polyphenyleneoxide was co-carbonized to be assimilated with mesophase pitch at the centre of the fibre, where the effects of oxidation may be rather limited. The oxidation reactivity and its mechanical strength after carbonization were slightly lower in comparison with those of the parent mesophase pitch.     

Carbonization of coals to produce anisotropic cokes. 1. Modifying activities of some additives in the co-carbonization of low-rank coals

Using low-rank coals, the modifying activities of some petroleum, coal tar and aromatic hydrocarbon additives have been examined to find procedures for their utilization in the preparation of blast furnace coke. Petroleum pitch, especially after hydrogenation, exhibited excellent modifying activity even with non-fusible coals. In contrast, the activity of coal tar was very limited with such coals. The napththenic component, revealed by n.m.r. of the additives, appears to be important in the co-carbonization by inducing fusibility and anisotropic development in such coals. Co-carbonization to recover the dehydrogenated additives was attempted. However, there was no development of the anisotropy in the resultant coke by dissolution of the coal particles although the coal particles were firmly fixed in the matrix. Acid-refluxing treatment of non-fusible coals was found to enhance their modification susceptibility, indicating that some of the acid-soluble mineral matter is important in the thermal depolymerization or fusion process of the coal.     

Carbonization and liquid-crystal (mesophase) development. 12. Mechanisms of the co-carbonization of coals with organic additives

In industrial situations, coals interact with solvents or additives to produce liquid fuels, solvent-refined coal, coal extract and metallurgical coke. In these processes there occurs a wide variation in effects or modifications of the coal by these additives. This paper describes the modifications which can occur, using a wide range of rank of coal, when these coals interact and are co-carbonized with a wide range of additives of different chemical properties. The optical texture of the resultant cokes is given special attention. The objective of the paper is to summarize the current state of knowledge of the mechanisms of these interactions. Possible mechanisms of interactions are summarized, kinetic and chemical structural aspects of reactions are outlined, the importance is mentioned of the formation of liquid phases enabling anisotropic optical textures in modified cokes to be created, and the industrial relevance of its possible development is discussed.     

Carbonization and liquid-crystal (mesophase) development. 8. The co-carbonization of coals with acenaphthylene and decacyclene

Several coals of different rank have been carbonized singly and also co-carbonized with acenaphthylene and decacyclene. The resultant cokes were mounted in resin and polished surfaces were examined for optical texture using a polarized-light optical microscope fitted with a half-wave retarder plate. The optical texture can be assessed qualitatively (visually) or quantitatively by a point-counting technique in terms of size and shape of constituent isochromatic anisotropic units. Some cokes from coals were Isotropic. Acenaphthylene was only able to exert a smaller influence than decacyclene on the optical texture of the resultant cokes from co-carbonizations. Decacyclene was able to modify the optical texture for both the low-rank non-fusible and the caking coals. The effects of changing the proportions of coal to additive were examined. Results are interpreted in terms of ‘depolymerization’ of the coal by the action of the additive (as solvent) and also by the action of the additive in modifying the processes of formation of semi-coke via nematic liquid crystals.     

Aspects of gasification and structure in cokes from coals

Cokes were prepared from nine coals of different rank and characterized by surface area measurement, reactivity to carbon dioxide at 1473K and Raman-laser spectroscopy. Rates of gasification of cokes on a unit surlface area basis (K¹ = g m^?2 min^?1) decreased with increasing rank of parent coal based on maximum oil reflectances. However rates of gasification could not be related to coke structure as measured by Raman-laser spectroscopy.     

Carbonization and liquid-crystal (mesophase) development. 7. Optical textures of cokes from acenaphthylene and decacyclene

Optical textures of cokes prepared by carbonizing acenaphthylene, decacyclene and mixtures thereof at selected values of heat-treatment temperatures and soak time have been compared. Optical textures are assessed using polished surfaces and reflected-polarized-light microscopy in conjunction with a half-wave plate. The acenaphthylene is chemically more reactive than the decacyclene which is itself formed during the carbonization of acenaphthylene. Products of carbonization of acenaphthylene can influence rates of carbonization of the decacyclene. Similar optical textures in cokes cannot be formed by compensating low heat-treatment temperatures with long soak periods. In addition to chemical rate-controlling processes, the physical properties of the system must be acknowledged, in particular the viscosity. Very large non-coalesced growth units of mesophase (800 μm diameter) have been observed. Pre-alignment of growth units of mesophase may occur prior to coalescence.     

不同结构活性炭对甲苯的吸附性能

考察了不同结构的活性炭样品对高浓度和低浓度甲苯蒸汽的吸附行为,采用低温(77 K)氮气吸附和129Xe-核磁共振方法对所用活性炭的结构进行了表征.并将活性炭对甲苯的吸附性能与其结构进行了关联.结果表明孔容积大的活性炭对高浓度甲苯蒸汽吸附容量大,而具有丰富微孔和较小平均孔径的活性炭对低浓度(2×10-5)甲苯蒸汽具有高的吸附容量.沥青基活性炭纤维对低浓度(2×10-5)甲苯蒸汽表现出较好的吸附能力.随着比表面积的增大,活性炭纤维对低浓度(2×10-5)甲苯蒸汽的吸附容量略有增加.OG5A,OG10A,OG15A和OG20A在30 ℃下对2×10-5甲苯蒸汽的饱和吸附容量分别为202 mg/g,219 mg/g,221 mg/g和235 mg/g.     

Reduction of nitric oxide with activated PAN fibres

The reductive removal of nitric oxide from flue gases by reaction with polyacrylonitrile-based active carbon fibres (PAN-ACF) activated with sulphuric acid has been studied at 423–632 K, using a circulating flow reactor. Nitric oxide (0.67 mmol) was completely removed via reduction with 1 g activated carbon under optimum conditions in 210 and 60 min at 423 and 623 K, respectively. N₂ was formed as NO was removed. Some oxygen remained on the carbon surface at 423 K, but was desorbed as CO or CO₂ on subsequent heating to 623 K. The bimolecular reaction of NO reduction over PAN-ACF, and the possible active sites of oxygen surface groups are discussed in the light of a kinetic study and a comparison of the fibre activation at different temperatures.