Growth of lactic acid bacteria in highly concentrated ultrafiltered skim milk retentates

Buffer capacity of ultrafiltered skim milk retentates at various protein concentrations and growth of direct set, frozen concentrated lactic starter cultures in such retentates were studied. Maximum buffering occurred at approximately pH 5.1 to 5.3. An average .48% lactic acid concentration was required to reduce the pH of plain skim milk to 4.6 compared with 1.01% for skim milk retentates concentrated 2.3:1 and 1.14% for skim milk retentate concentrated 2.6:1. Skim milk retentates concentrated 4.3:1 and 5.8:1 were unable to attain pH 4.6 even when titratable acid was greater than 1.8%. Lactic acid required to reduce pH to 4.6 for the two lower concentrated retentates (2.3:1 and 2.6:1) were 1.85 and 2.45%. Time to attain pH 4.6 was a function of the bacterial cell concentration of the cultures and the total protein level of retentates. Starter organism growth was unaffected by high total solids or ash of retentates. Growth rate and lactose metabolism decreased markedly below pH 5.2 at which point bacterial population was 10(9) cfu/ml.     

Molecular Docking Studies and Biological Evaluation of Berberine–Benzothiazole Derivatives as an Anti-Influenza Agent via Blocking of Neuraminidase

In this study, we have introduced newly synthesized substituted benzothiazole based berberine derivatives that have been analyzed for their in vitro and in silico biological properties. The activity towards various kinds of influenza virus strains by employing the cytopathic effect (CPE) and sulforhodamine B (SRB) assay. Several berberine–benzothiazole derivatives (BBDs), such as BBD1, BBD3, BBD4, BBD5, BBD7, and BBD11, demonstrated interesting anti-influenza virus activity on influenza A viruses (A/PR/8/34, A/Vic/3/75) and influenza B viral (B/Lee/40, and B/Maryland/1/59) strain, respectively. Furthermore, by testing neuraminidase activity (NA) with the neuraminidase assay kit, it was identified that BBD7 has potent neuraminidase activity. The molecular docking analysis further suggests that the BBD1–BBD14 compounds’ antiviral activity may be because of interaction with residues of NA, and the same as in oseltamivir.     

Reaction products of ammonium nitrate phosphate fertilizers of varying water-soluble phosphorus content in different Indian soils

Studies were undertaken on the isolation and identification of reaction products of ammonium nitrate phosphate (ANP) fertilizers containing 30, 50 and 70 per cent water-soluble phosphorus (WSP) of total phosphorus in representative soils of the vertisol, oxisol, alfisol, entisol, mollisol and aridisol groups of India. ANP fertilizers were applied in solid form to soil, and reaction products formed at and around the site of ANP fertilizer placement were identified after six weeks incubation in moist soils by X-ray diffraction technique. DCPD (dicalcium phosphate dihydrate- CaHPO₄ · 2H₂O) was the major reaction product of ANP fertilizers containing 30 and 50 per cent WSP in vertisol, entisol, aridisol, mollisol, oxisol and alfisol, and of ANP containing 70 per cent WSP in vertisol, entisol, alfisol, aridisol and mollisol. DCP (dicalcium phosphate-CaHPO₄) was detected with ANP of 30 and 50 per cent WSP in the vertisol, alfisol, entisol, mollisol and aridisol groups of soils. In addition to DCPD, FePO₄ · 2H₂O (metastrengite) and AlPO₄ · 2H₂ O-monoclinic (metavariscite) were formed in alfisol and oxisol soils with ANP of 30 and 50 per cent WSP. FePO₄ · 2H₂O and AlPO₄ · 2H₂O (metavariscite) were identified in alfisol and oxisol soils while AlPO₄ · 2H₂O-orthorhombic (variscite) was formed in alfisol soils with ANP of 70 per cent WSP.     

RF sputter deposition of poly(tetrafluoroethylene) films as masking materials for silicon micromachining

Polymers have been studied extensively because of their wonderful array of properties. Their properties can be tailored by many means and can be made useful in many ways. Polymers can be crosslinked or branched and can provide different properties, such as conduction and passivation. This study dealt with the RF sputter deposition of poly(tetrafluoroethylene) (PTFE) films with the aim of using them as masking materials during the fabrication of various micromachined structures. The films were deposited on silicon substrates at different plasma powers (100, 150, and 200 W) for a constant deposition time (60 min). To test the masking properties, the deposited films were immersed in a 20 wt % aqueous KOH solution at 80°C for 60 min. The films showed lower contact angles and interfacial tension, and this indicated good adhesion of the films to the silicon substrates. Good adhesion is an essential quality of masking materials during micromachining. The structural properties of the as‐deposited and etched films were studied with Fourier transform infrared and X‐ray photoelectron spectroscopy. These indicated that the bonding groups and binding energies of C? F and C? CF matched the reported values well. Furthermore, the presence of C? F and C? CF bonds, even after the etching of silicon substrates in highly alkaline KOH solutions for 60 min, showed that the PTFE films remained unchanged in the etchant and, therefore, could function as good masking materials during the fabrication of micromachined structures. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1183–1192, 2004     

Development,optimization, and characterization of a novel tea tree oil nanogel using response surface methodology

Purpose: To develop and optimize nanoemulsion (NE)-based emulgel (EG) formulation as a potential vehicle for topical delivery of tea tree oil (TTO).

Methodology: Central composite design was adopted for optimizing the processing conditions for NE preparation by high energy emulsification method viz. surfactant concentration, co-surfactant concentration, and stirring speed. The optimized NE was developed into emulgel (EG) using pH sensitive polymer Carbopol 940 and triethanolamine as alkalizer. The prepared EG was evaluated for its pH, viscosity, and texture parameters, ex vivo permeation at 37?°C and stability. Antimicrobial evaluation of EG in comparison to conventional gel and pure TTO was also carried out against selected microbial strains.

Results and discussion: Optimized NE had particle size and zeta potential of 16.23?±?0.411?nm and 36.11?±?1.234?mV, respectively. TEM analysis revealed the spherical shape of droplets. The pH of EG (5.57?±?0.05?) was found to be in accordance with the range of human skin pH. EG also illustrated efficient permeation (79.58?μL/cm²) and flux value (J_SS) of 7.96?μL cm²/h through skin in 10?h. Viscosity and texture parameters, firmness (9.3?±?0.08?g), spreadability (2.26?±?0.06?mJ), extrudability (61.6?±?0.05?mJ), and adhesiveness (8.66?±?0.08?g) depict its suitability for topical application. Antimicrobial evaluation of EG with same amount of TTO as conventional gel revealed broader zones of growth inhibitions against all the selected microbial strains. Moreover, EG was also found to be nonirritant (PII 0.0833). These parameters were consistent over 90 d.

Conclusion: TTO EG turned out to be a promising vehicle for the topical delivery of TTO with enhanced therapeutic efficacy.     

Some fixed point theorems in 1-M-complete fuzzy metric-like spaces

Very recently, in order to unify the notions of fuzzy metric space and metric-like space, Shukla and Abbas introduced the concept of fuzzy metric-like space and proved some fixed-point results in this setting. In this article, we modify the notion of Cauchy sequence and completeness to generalize their results. Thus, we extend their theorems to a more general framework, which is also appropriate to generalize some recent, well-known results in this line of research. Furthermore, several examples are presented to illustrate the significance of our results.     

Experiments and simulations of short-pulse laser-pumped extreme ultraviolet lasers

Recent experimental work on the development of extreme ultraviolet lasers undertaken using as the pumping source the VULCAN laser at the Rutherford Appleton Laboratory is compared to detailed simulations. It is shown that short duration (/spl sim/picosecond) pumping can produce X-ray laser pulses of a few picosecond duration and that measurement of the emission from the plasma can give an estimate of the duration of the gain coefficient. The Ehybrid fluid and atomic physics code developed at the University of York is used to simulate X-ray laser gain and plasma emission. Two postprocessors to the Ehybrid code are utilized: 1) to raytrace the X-ray laser beam amplification and refraction and 2) to calculate the radiation emission in the kiloelectronvolt photon energy range. The raytracing and spectral simulations are compared, respectively, to measured X-ray laser output and the output of two diagnostics recording transverse X-ray emission. The pumping laser energy absorbed in the plasma is examined by comparing the simulations to experimental results. It is shown that at high pumping irradiance (>10/sup 15/ Wcm/sup -2/), fast electrons are produced by parametric processes in the preformed long scalelength plasmas. These fast electrons do not pump the population inversion and so pumping efficiency is reduced at high irradiance.     

Photoconductivity in p-i-n Quantum Well Optical Modulators

Abstract

We have studied the temperature dependence of the current due to photoexcited carriers in p-i-n single quantum-well optical modulators, in order to ascertain the dominant transport mechanisms involved. A model describing the photocurrent is presented which includes the temperature and field dependence of the thermal emission, the tunnelling, the mobility and the recombination rate. A comparison between the experimental results and the model is also presented, outlining the probable transport processes.