Characterisation of interfaces in nanocrystalline palladium

Structures of grain boundaries and triple line junctions in nanocrystalline materials are of interest owing to large fractions of atoms in nanocrystalline materials being at these interfacial positions. Grain boundary and triple line junction structures in nanocrystalline palladium have been studied using high-resolution transmission electron microscopy (HRTEM). The main micro structural features observed include the varying atomic structures of grain boundaries and the presence of disordered regions at triple line junctions. Also, there is variation in lattice parameters in different nanocrystalline grains. Geometric phase analysis is used to quantify atomic displacements within nanocrystalline grains. Displacement fields thus detected indicate links to the interface structures.     

Thermal expansion characteristics of a titanium modified austenitic stainless steel: measurement by high-temperature X-ray diffraction and modelling using Grüneisen formalism

The thermal expansion of a titanium modified, swelling resistant austenitic stainless steel designated as D9 is studied by measuring the lattice parameter as a function of temperature in the range 300-1300 K by high-temperature X-ray diffraction technique. The thermal expansion data thus obtained is in reasonable agreement with the typical thermal expansion values reported for similar nuclear grade austenitic stainless steels. However, at temperatures exceeding 900 K, the measured thermal expansivity exhibits a pronounced non-linear increase due partly to the precipitation of complex carbide and intermetallic phases. The high-temperature thermal expansion data obtained in the present study are augmented by modelling the low-temperature thermal expansion behaviour by Grüneisen formalism.     

Plackett-burman design for determining the preference of Rhizomucor miehei lipase for FA in acidolysis reactions with coconut oil

The preference of lipase (EC 3.1.1.3) from Rhizomucor miehei in the incorporation of 11 FA, ranging from C10∶0 to C22∶6, into coconut oil TAG during acidolysis was studied by applying the Plackett-Burman experimental design. Enzymatic acidolysis reactions were carried out in hexane at 37°C for 48 h with coconut oil (0.1 M) and a mixture of 11 FA at a TAG to FA molar ratio of 1∶1. Lipase was used at the 5 wt% level. The incorporation of FA into coconut oil TAG was determined by GC. The lipase showed preference for long-chain saturated FA for incorporation into coconut oil TAG. The FA with 18 carbon atoms showed a high incorporation rate (18∶1>18∶1>18∶3). The lipase showed the least preference for the incorporation of 12∶0, which occurs in maximal concentration (46%), whereas the most preferred FA, 18∶0, occurs at a very low concentration (<2%) in coconut oil. The overall preference of lipase for the incorporation of different FA into coconut oil TAG was 18∶0>18∶2, 22∶0>18∶1, 18∶3, 14∶0, 20∶4, 22∶6>16∶0>12∶0≫10∶0.     

An integrated laser Raman optical sensor for fast detection of nitrogen and oxygen in a cryogenic mixture

An integrated fiber optic Raman sensor was designed for real-time, nonintrusive detection of liquid nitrogen (LN(2)) in liquid oxygen (LO(2)) at high pressures and high flow rates. This was intended to monitor the quality of LO(2) in oxidizer feed lines during the ground testing of rocket engines. Various issues related to optical diagnosis of cryogenic fluids (LN(2)/LO(2)) in supercritical environment of rocket engine test facility, such as fluorescence from impurity in optical window of feed line, signal-noise ratio, and fast data acquisition time, etc., are well addressed. The integrated sensor employed a frequency doubled 532-nm continuous wave Nd:YAG laser as an excitation light source. The other optical components included were InPhotonics Raman probes, spectrometers, and photomultiplier tubes (PMTs). The spectrometer was used to collect the Raman spectrum of LN(2) and LO(2). The PMT detection unit was integrated with home-built LABVIEW software for fast monitoring of concentration ratios LN(2) and LO(2). Prior to designing an integrated sensor system, its optical components were also tested with gaseous nitrogen (GN(2)) and oxygen (GO(2)).     

Performance evaluation of an acrylic mirror booster solar still for neera concentration in jaggery-making industry

A single-basin solar still was constructed from locally available materials to concentrate palm tree juice (neera) for jaggery-making application. The performance of the still was tested with and without an acrylic mirror booster on both partially cloudy and clear sunshine days. About 73% of water content from neera was evaporated within 2 days by using the mirror booster technique in clear sunshine days. Distilled water of about 7.26 l was extracted from 10 l of neera with the mirror booster condition. Wind velocity showed a considerable effect on neera juice temperature and water vapour temperature during partially cloudy conditions. The calculated efficiency of the still with the mirror booster technique was 36.53% in clear sunshine conditions. The calculated energy conservation for the neera concentration process by using the mirror booster solar still was about 16408 kJ.     

Provably secure blockchain privacy-preserving smart contract centric dynamic group key agreement for large WSN

The Journal of Supercomputing - The contemporary Group Key Agreement (GKA) entails lightweight computing, reduced communication, decentralized certification, personal privacy protection,...     

13C CP/MAS NMR Spectroscopy of Native and Acid Modified Starches

¹³CP/MAS NMR spectroscopic studies of some starches from cereals (wheat, maize and finger millet), pulses (green gram, chick pea), tuber (potato) and root (tapioca), and their respective acid (HCI, HNO₃) modified starches were carried out. While cereal starches exhibited a triplet signal for their anomeric carbons, pulse, tuber and root starches showed doublets. Line width changes in signals indicated that debranching in the above modified starches led to narrowing of C₆ signals (more pronounced in the case of potato and tapioca starches) and were consistent with the release of branching strains. Potato starch, both native and modified, was found to be different from other starches as inferred from the chemical shift values for their anomeric carbons and line shape. The dihedral angle (ϕ′2) calculated from chemical shift values for C₁ and conformation of dihedral angel (x) as predicted from chemical shift of C₆ are discussed with respect to structural organization.     

Inhibition of Rhizomucor miehei and Candida rugosa lipases by D-glucose in esterification between L-alanine and D-glucose

A detailed kinetic study of the esterification of D-glucose with L-alanine catalyzed by lipases from Rhizomucor miehei (RML) and Candida rugosa (CRL) showed that both lipases follow the Ping-Pong Bi-Bi mechanism, in which L-alanine and D-glucose bind in subsequent steps releasing water and L-alanyl-D-glucose, with competitive substrate inhibition by D-glucose at higher concentrations leading to the formation of dead-end lipase.D-glucose complexes. An attempt to obtain the best fit of this kinetic model through curve fitting yielded good approximates of the apparent values of four important kinetic parameters: for RML-k(cat)=0.29+/-0.028x10(-3) M h(-1) mg(-1), K(m L-alanine)= 4.9+/-0.51x10(-3) M, K(m D-glucose)=0.21+/-0.018x10(-3) M, and K(i D-glucose)=1.76+/-0.19x10(-3) M; for CRL-k(cat)= 0.75+/-0.08x10(-3) M h(-1) mg(-1), K(m L-alanine)=56.2+/-5.7x10(-3) M, K(m D-glucose)=16.2+/-1.8x10(-3) M, and K(i D-glucose) =21.0+/-1.9x10(-3) M.     

Strengthening of RC beams in shear using GFRP inclined strips – An experimental study

Though there have been a number of studies on shear strengthening of RC beams using externally bonded fiber reinforced polymer sheets, the behaviour of FRP strengthened beams in shear is not fully understood. This is partly due to various reinforcement configurations of sheets that can be used for shear strengthening and partly due to different failure modes a strengthened beam undergoes at ultimate state. Furthermore, the experimental data bank for shear strengthening of concrete beams using FRP remains relatively sparse due to which the design algorithms for computing the shear contribution of FRP are not yet clear. The objective of this study is to clarify the role of glass fiber reinforced polymer inclined strips epoxy bonded to the beam web for shear strengthening of reinforced concrete beams. Included in the study are effectiveness in terms of width and spacing of inclined GFRP strips, spacing of internal steel stirrups, and longitudinal steel rebar section on shear capacity of the RC beam. The study also aims to understand the shear contribution of concrete, shear strength due to steel bars and steel stirrups and the additional shear capacity due to glass fiber reinforced polymer strips in a RC beam. And also to study the failure modes, shear strengthening effect on ultimate force and load deflection behaviour of RC beams bonded externally with GFRP inclined strips on the shear region of the beam.     

Synthesis of nanoparticles of barium lanthanum hafnium oxide by a modified combustion process

Barium lanthanum hafnium oxide, a complex perovskite ceramic, has been synthesized as nanoparticles by a modified combustion process for the first time. The Ba, La, and Hf ions required for the formation of Ba2LaHfO5.5 were obtained in solution by dissolving in boiling nitric acid a stoichiometric mixture of BaCO3, La2O3, and HfO2 that had been heated at 1200 degrees C for 4 h. By complexing the ions with citric acid and using ammonia as fuel, it was possible to get Ba2LaHfO5.5 as nanoparticles in a single-step combustion process. The powder obtained by the present combustion process was characterized by X-ray diffraction, BET surface area analysis, differential thermal analysis, thermogravimetric analysis, infrared spectroscopy, and scanning and high-resolution transmission electron microscopy. According to the results of X-ray and electron diffraction, the powder synthesized through the combustion process showed single-phase barium lanthanum hafnium oxide. The transmission electron microscopic investigations showed a grain size of 42 nm, with a standard deviation of 8 nm. The nanoparticles of Ba2LaHfO5.5 synthesized by the present combustion technique could be sintered to > 97% of the theoretical density at a relatively low temperature of 1425 degrees C. Scanning electron microscopic studies on the sintered Ba2LaHfO5.5 samples showed that the final grain size of the sintered specimen was < 500 nm.