Thermodynamics of titanium and nitrogen in an Fe-Ni melt

The equilibrium solubility of titanium and nitrogen in Fe-Ni melts was measured in the presence of pure solid TiN under various nitrogen pressures in the temperature range of 1843 to 1923 K. The activity coefficients of titanium and nitrogen relative to a 1 mass pct standard state in liquid iron were calculated from the experimental results for Fe-Ni alloys of nickel contents up to 30 mass pct. Nickel decreases the activity coefficient of titanium, but it increases the activity coefficient of nitrogen in an Fe-Ni-Ti-N melt. Therefore, the effect of nickel on the solubility product of TiN is not significant. The first- and second-order interaction parameters of nickel on titanium (e _Ti ^Ni and r _Ti ^Ni , respectively) were determined to be −0.0115 and 0 at 1873 K, respectively. Similarly, the interaction parameters of nickel on nitrogen (e _N ^Ni and r _N ^Ni , respectively) were determined to be 0.012 and 0, respectively, at 1873 K. The temperature dependence of these interaction parameters was also determined.     

Efficiency enhancement of dye-sensitized solar cells with addition of additives (single/binary) to ionic liquid electrolyte

The effect of addition of single and binary additives on the performance of dye-sensitized TiO₂ solar cells based on electrolytes containing an ionic liquid (IL), 1,2-dimethyl-3-propylimidazolium iodide (DMPII) has been studied. Among the seven additives used, the addition of 2-(dimethylamino)-pyridine (DMAP) to IL resulted in best cell efficiency, which showed further enhancement with the addition of 5-chloro-1-ethyl-2-methylimidazole (CEMI) as second additive. The efficiency of the dye-sensitized solar cell (DSC) based on an electrolyte containing binary additives (DMAP and CEMI in equal molar ratios) has been found to increase by 62·5% from 4·35 to 7·07%. The dependence of different photovoltaic performance parameters (V _oc, J _sc, ff, η) of DSC upon temperature has been studied over a 30–120°C range and only a small decrease in conversion efficiency has been observed. The electrolyte containing binary additives (DMAP and CEMI) shows best cell performance up to 120°C.     

STRESS CONTROLLED FERROELECTRIC (BA0.5Sr0.5)TiO3 THIN FILMS PREPARED ON GD2O3/SRTiO3(001) BY A PULSED LASER DEPOSITION

ABSTRACT

Stress controlled epitaxial ferroelectric Ba_0.5Sr_0.5TiO₃ (BST) films have been deposited on Gd₂O₃/SrTiO₃ by pulsed laser deposition with oxygen background pressure of 200 mTorr at the deposition temperature of 750°C. In order to control the stress in BST films, oxygen pressures for Gd₂O₃ buffer layers have been varied from 0.1 to 100 mTorr, while that of BST films have been fixed at 200 mTorr. It has been found that the lattice parameters of the BST films deposited on Gd₂O₃ were changed. Furthermore, microwave properties of co-planar waveguide (CPW) fabricated on BST films were investigated by a HP 8510C vector network analyzer from 1–20 GHz. Large dielectric tunabilities were observed from the CPW's fabricated on BST films deposited on Gd₂O₃ layers deposited at low and high oxygen pressures, 0.1 and 100 mTorr, respectively.     

Single-atom Pd catalyst anchored on Zr-based metal-organic polyhedra for Suzuki-Miyaura cross coupling reactions in aqueous media

The challenge for single-atom catalysts in various C-C cross coupling reaction exists in the development of solid supporting materials.It has been desired tofind a supporting material designed in molecular level to anchor a single-atom catalyst and provide high degree of dispersion and substrate access in aqueous media.Here,we prepared discrete cages of metal-organic polyhedra anchoring single Pd atom(MOP-BPY(Pd))and successfully performed a Suzuki-Miyaura cross coupling reaction with various substrates in aqueous media.It was revealed that each tetrahedral cage of MOP-BPY(Pd)has 4.5 Pd atoms on average and retained its high degree of dispersion up to 3 months in water.The coupling efficiencies of the Suzuki-Miyaura cross coupling reaction exhibited more than 90.0%for various substrates we have tested in the aqueous media,which is superior to those of the molecular Pd complex and metal-organic framework(MOF)anchoring Pd atoms.Moreover,MOP-BPY(Pd)was successfully recovered and recycled without performance degradation.     

Adaptive Step Size Control of LMS-based Interference Cancellationfor ICS Repeater in Wibro Environment

The use of repeater for the support of high rate data transmission and the extension of cell coverage is imperative for the Wibrc system,which based on the IEEE 8M.16e standardization.Generally,if the separation between transmitting and receiving antennas isnot sufficient,the oscillation of repeater and the interference due to the feedback signals from original transmitted signal may be ocerur.Hence,the Interference Cancellation System(ICS)should be implemented as the important part of the repeater system far the mobile cellular systems in order to eliminate unwanted signals from the corruptW signals in the receiver.In this paper,we propose an adaptive technique for the Least Mean Square(LMS)-based interference cancellation methods by changing the step size according to the variation of channel environment in order to improve the performance degradation which oceuurs by using the fixed step size approach.Simrlatim results show that the proposed sclxme attains a little lower Berafor Rate(BER)performance and much faster convergence speed compared to the conventional LMS-based interference cancellation techniques.The proposed scheme can be applied to other Orthogonal Frequency Division Multiple(OFDM)-based cellular systems and also be expected to achieve a similar performance improvement to W17-advanced system,which is called as the next generation mobile communication standards.     

柔性船板折弯模具有限元仿真分析及实验研究

根据船板厚度及宽度的不同,设计了一可调式柔性船板折弯模具,并建立了模具的有限元模型;采用接触法对折弯模具的可靠性以及船板弯曲力和模具的受力、应力应变情况进行了仿真分析.仿真及实验结果表明,所建立的有限元模型是正确的,所设计的模具能够满足使用要求.     

位置服务中对移动物体的时空索引

在TPR*-tree的基础上提出了DTPR*-tree索引结构, 引进了事务时间和有效时间.它能索引移动物体过去、当前和未来的位置信息,支持基本位置查询和空间约束查询,有很好的空间、查询和更新效率.     

液压挤压对复合铸造Al3003/Al4004包覆材料显微组织的影响(英文)

研究液压对混合复合铸造Al 3003/Al 4004包覆材料微观组织变化的影响。复合铸造Al 3003/Al 4004包覆材料试样为圆形,由Al 3003(外部)和Al 4004(内部)材料组成。采用液压设备,在温度423 K、挤压比5的条件下制造试样。在挤压之前,Al 4004材料的直径为80 mm,Al 3003材料的厚度为35 mm,在挤压后,2种材料的直径和厚度分别为30 mm和5 mm。研究了2个试样的微观组织和硬度。在挤压之前,复合铸造Al 3003/Al 4004包覆材料横截面的硬度以抛物线的形式向中心增大。然而,在挤压后,Al 4004材料的硬度几乎没有变化。在挤压之前,Al 3003和Al 4004材料的界面存在大量直径超过1 mm的大空洞,这些大空洞随着液压过程的进行而消失。     

Effects of Ti thickness on epitaxial CoSi2 growth from Co/Ti bilayer

Abstracts are not published in this journal This revised version was published online in November 2006 with corrections to the Cover Date.