Efficiency enhancement of dye-sensitized solar cells with addition of additives (single/binary) to ionic liquid electrolyte

The effect of addition of single and binary additives on the performance of dye-sensitized TiO₂ solar cells based on electrolytes containing an ionic liquid (IL), 1,2-dimethyl-3-propylimidazolium iodide (DMPII) has been studied. Among the seven additives used, the addition of 2-(dimethylamino)-pyridine (DMAP) to IL resulted in best cell efficiency, which showed further enhancement with the addition of 5-chloro-1-ethyl-2-methylimidazole (CEMI) as second additive. The efficiency of the dye-sensitized solar cell (DSC) based on an electrolyte containing binary additives (DMAP and CEMI in equal molar ratios) has been found to increase by 62·5% from 4·35 to 7·07%. The dependence of different photovoltaic performance parameters (V _oc, J _sc, ff, η) of DSC upon temperature has been studied over a 30–120°C range and only a small decrease in conversion efficiency has been observed. The electrolyte containing binary additives (DMAP and CEMI) shows best cell performance up to 120°C.     

Texture development and deformation behavior of a statically recrystallized Mg-Al-Zn alloy sheet

A statically recrystallized Mg-3Al-1Zn alloy was fabricated by low temperature roll heating (140 °C) processes and subsequent annealing at 250 °C for 5 min. The fabricated sheet, with a grain size of 4.1 m, shows an improved planar anisotropy and higher elongations to failure at room temperature and 200 °C, compared with those of the sheet fabricated by conventional hot rolling processes, due to the weak basal texture along with the refined microstructure.     

STRESS CONTROLLED FERROELECTRIC (BA0.5Sr0.5)TiO3 THIN FILMS PREPARED ON GD2O3/SRTiO3(001) BY A PULSED LASER DEPOSITION

ABSTRACT

Stress controlled epitaxial ferroelectric Ba_0.5Sr_0.5TiO₃ (BST) films have been deposited on Gd₂O₃/SrTiO₃ by pulsed laser deposition with oxygen background pressure of 200 mTorr at the deposition temperature of 750°C. In order to control the stress in BST films, oxygen pressures for Gd₂O₃ buffer layers have been varied from 0.1 to 100 mTorr, while that of BST films have been fixed at 200 mTorr. It has been found that the lattice parameters of the BST films deposited on Gd₂O₃ were changed. Furthermore, microwave properties of co-planar waveguide (CPW) fabricated on BST films were investigated by a HP 8510C vector network analyzer from 1–20 GHz. Large dielectric tunabilities were observed from the CPW's fabricated on BST films deposited on Gd₂O₃ layers deposited at low and high oxygen pressures, 0.1 and 100 mTorr, respectively.     

Quantitative analysis of microbial community structure in two-phase anaerobic digesters treating food wastewater

An acidogenic reactor with a 0.5-L working volume and a methanogenic digester with a 5-L of working volume were operated for 150 days on a continuous mode to investigate the structure of a microbial community during food wastewater treatment. During the steady state of anaerobic digestion, volatile solids (VS) removal efficiency in the pilot plant was approximately 65%. The bacterial population was higher than any other methanogens detected during the entire anaerobic process and treatment of raw food wastewater. Methanomicrobiales (MMB), Methanosarcinales (MSL), and Methanobacteriales (MBT) were detected during digestion. The methanogenic population present in the acidogenic reactor was directly affected by the archaeal community in raw food wastewater. However, the shift of microbial community in the methanogenic digester was relatively gradual. The performance of methanogenic digester might be more related to the change of microbial metabolism affected by the physicochemical properties of the input substrate.     

First dicadmium(II) complex of tripodal amide ligand with one edge-sharing monocapped octahedral geometry

A new dicadmium(II) complex [Cd₂(L)₂(H₂O)₂](NO₃)₄ · 8H₂O (1) with the tripodal amide ligand L (tris[3-aza-2-oxo-4-(2-pyridyl)butyl]amine) was synthesized and structurally characterized. Complex 1 is revealed as a dinuclear 2:2 (Cd:L) complex, in which each cadmium(II) ion is hepta-coordinated with the coordination surrounding of distorted monocapped octahedral geometry. Two cadmium(II) ions are dibridged by two carbonyl μ-O atoms forming a Cd₂(μ-O)₂ parallelogram-type moiety. Interestingly, the dinuclear coordination sphere can be seen as resulting from the fusion of two distorted monocapped octahedral [Cd(L)(H₂O)]²⁺ units through sharing one edge originated from the two carbonyl μ-O atoms as a first example. Comparative NMR, IR and FAB-mass data of 1 are also discussed.     

Transport of particulate and gaseous pollutants in the vicinity of a human body

A uniform pollutant concentration in indoor environments can be an inappropriate representation of breathing concentration. This is especially true when local airflow in the vicinity of an occupant is dominant in transporting pollutants. The present study investigates the airflow in the vicinity of a human body, effects of respiration on breathing concentration of particulate and gaseous pollutants, and inhalation exposure in relation to source position and overall airflow patterns. It is based on experiments with a human simulator in a full-scale environmental chamber. Airflow and pollutant concentrations in the vicinity of a thermal manikin are monitored, while varying parameters including breathing, arm/hand movements, and ventilation system. Results show that breathing of a sedentary manikin has a measurable influence on the airflow in breathing zone, whereas it has very small impacts on occupant thermal plume. Also, localized hand motions have insignificant effects on the thermal plume. The results indicate that overall airflow pattern affect the inhaled particle concentrations. With highly mixed airflow in the space, relatively uniform concentration patterns occur in the occupant vicinity. However, with stratified airflow patterns, non-uniform concentration patterns are observed due to the occupant thermal plume. With a particle source at floor level and in near proximity to an occupant, inhaled particle concentrations are up to four times higher than the ambient concentrations. This finding implies that occupant thermal plume may play a significant role in transporting pollutants from floor level to the breathing zone. The non-uniform concentration observed with stratified flow also suggests caution in estimating inhalation exposure using a “well-mixed” mass balance model.     

Adaptive Step Size Control of LMS-based Interference Cancellationfor ICS Repeater in Wibro Environment

The use of repeater for the support of high rate data transmission and the extension of cell coverage is imperative for the Wibrc system,which based on the IEEE 8M.16e standardization.Generally,if the separation between transmitting and receiving antennas isnot sufficient,the oscillation of repeater and the interference due to the feedback signals from original transmitted signal may be ocerur.Hence,the Interference Cancellation System(ICS)should be implemented as the important part of the repeater system far the mobile cellular systems in order to eliminate unwanted signals from the corruptW signals in the receiver.In this paper,we propose an adaptive technique for the Least Mean Square(LMS)-based interference cancellation methods by changing the step size according to the variation of channel environment in order to improve the performance degradation which oceuurs by using the fixed step size approach.Simrlatim results show that the proposed sclxme attains a little lower Berafor Rate(BER)performance and much faster convergence speed compared to the conventional LMS-based interference cancellation techniques.The proposed scheme can be applied to other Orthogonal Frequency Division Multiple(OFDM)-based cellular systems and also be expected to achieve a similar performance improvement to W17-advanced system,which is called as the next generation mobile communication standards.     

柔性船板折弯模具有限元仿真分析及实验研究

根据船板厚度及宽度的不同,设计了一可调式柔性船板折弯模具,并建立了模具的有限元模型;采用接触法对折弯模具的可靠性以及船板弯曲力和模具的受力、应力应变情况进行了仿真分析.仿真及实验结果表明,所建立的有限元模型是正确的,所设计的模具能够满足使用要求.