Excavation and support design of the Dicle–Kralkizi water tunnel: an overview

Tunneling projects have their uniqueness in terms of engineering problems. The expertise gained from analyzing these projects establishes a sound basis for future application. This paper conveys experiences gained during the construction and support of the design of the Dicle–Kralkizi water tunnel, Turkey. Tunnel stability problems including overbreaks and surface subsidence are evaluated. An analysis of the breakdowns, factors controlling advance rate and the overall performance of tunnel are covered. The accumulated information presented here is believed to be useful and reliable for a successful tunnel excavation in similar formations.     

Sliding wear of non-hydrogenated diamond-like carbon coatings against magnesium

Magnesium alloys are of increasing interest to the automobile industry for their potential in reducing vehicle weight, and in turn, improving fuel economy and lowering emissions. It follows that improving the magnesium manufacturing processes will promote greater use of magnesium alloys in automobiles. In recent years, diamond-like carbon (DLC) coatings have attracted attention for their low coefficient of friction (COF) and wear rates. The implementation of DLC coatings on tool and die surfaces may help increase the efficiency of magnesium component manufacturing processes (such as cutting and sheet forming) and also improve the surface quality of the finished products.In this study, the dry sliding wear behaviour of magnetron sputtered non-hydrogenated DLC coatings against Mg (> 99.9 wt.%) was investigated using a vacuum pin-on-disc tribometer. Tests were performed in ambient air (28% RH) and in argon, under a constant load of 5 N and at a sliding speed of 0.12 m/s. In argon, the non-hydrogenated DLC coatings showed a very low COF of 0.05 after an initial running-in period. Carbonaceous material transfer from the non-hydrogenated DLC to the contact surface of the Mg pin was observed in argon. Changing the test atmosphere from argon to ambient air increased the COF to 0.40, which was accompanied by the formation of oxidized Mg debris and an increased wear rate. The friction and wear mechanisms of non-hydrogenated DLC coatings against Mg are proposed to rationalize experimental observations.     

Resistorless floating immittance function simulators employing current controlled conveyors and a grounded capacitor

In this paper, new floating immittance function simulators employing second-generation current controlled conveyors are proposed. The first four of the presented circuits employ only a single grounded capacitor as passive component and can realize either a negative or a positive floating inductor or capacitor. The last two of the proposed circuits do not employ passive components and can realize either negative or positive floating resistances. All of the proposed circuits do not require passive element matching. As an application, a third-order butterworth filter is realized using the proposed positive floating inductance simulator. SPICE simulation results and large signal behavior of the filter are included.     

Numerical treatment of a quasilinear initial value problem with boundary layer

The paper deals with the singularly perturbed quasilinear initial value problem exhibiting initial layer. First the nature of solution of differential problem before presenting method for its numerical solution is discussed. The numerical solution of the problem is performed with the use of a finite-fitted difference scheme on an appropriate piecewise uniform mesh (Shishkin-type mesh). An error analysis shows that the method is first-order convergent except for a logarithmic factor, in the discrete maximum norm, independently of the perturbation parameter. Finally, numerical results supporting the theory are presented.     

Comparison of pool boiling CHF of a polished copper block and carbon steel block on a declined slope

This study conducts a critical heat flux (CHF) experiment on a carbon steel block, and the block is positioned on slope that is declined at angles of 5° and 10°. The results of the carbon steel block experiment were then analyzed and compared with the results obtained from a copper block experiment that had been conducted previously at the same test facility. The comparison showed that several different types of phenomena had occurred, and the carbon steel block CHF at both 5° and 10° was much lower than that of the copper block. Detailed images of the heating surface of each material were acquired by a high-speed camera under different heat fluxes and analyzed. The carbon steel block surface generates more bubbles compared to the copper block under the same heat flux, which indicates that the carbon steel block should have a large number of nucleation sites. This causes a higher CHF. Finally, several existing theories on CHF mechanisms were also analyzed in an attempt to explain the difference of copper and carbon steel. It seemed that the contact angle alone was not sufficient to explain the large CHF decrease in the carbon steel block.     

High Input Impedance NMOS-based Phase Shifter with Minimum Number of Passive Elements

In this paper, a new voltage-mode (VM) first-order phase shifter (all-pass filter) employing only four NMOS transistors and minimum number of passive elements (i.e. one resistor and one capacitor) is proposed. The proposed VM phase shifter has high input impedance and does not require passive element matching constraints. Moreover, since only two NMOS transistors are stacked between positive and negative supply voltages, the proposed circuit is suitable for low-voltage operation. Electronic tunability can be provided easily by replacing the employed resistor with an NMOS transistor operating in triode region. Simulation results based on 0.18 μm TSMC CMOS parameters with ±0.9 V supply voltages are given to demonstrate the performance of the proposed phase shifter.     

Polymerization of epoxides catalyzed by a mixed‐valent iron trifluoroacetate [Fe3O(O2CCF3)6(H2O)3]

The readily available mixed‐valent iron trifluoroacetate complex [Fe₂^IIIFe^II(µ₃‐O)(O₂CCF₃)₆(H₂O)₃] is an effective catalyst for the polymerization of epoxides. A very small amount of the catalyst (1.0–0.01 mol%) could initiate the polymerization of cyclohexene oxide, cyclopentene oxide and epichlorohydrin. Based on quantitative end‐group analysis by ¹⁹F NMR spectroscopy, a Lewis acid (LA^⊕) catalyzed anionic reaction mechanism is proposed. Copyright © 2012 Society of Chemical Industry     

Classification of physiological disorders in apples fruit using a hybrid model based on convolutional neural network and machine learning methods

Neural Computing and Applications - Physiological disorders in apples are due to post-harvest conditions. For this reason, automatic identification of physiological disorders is important in...